RC-1 Installation Termination

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I am trying to upgrade Vista Beta 2 to RC-1. It makes it fine throught the
compatibility test. When it reaches 10% on the file copy task it simply says
that it encountered an error and terminates the install.

Is anyone else encountering this problem. Any known fixes?
 
Hello Vista,

Can you please upload the contents of your $windows.bt$\panther folder.

Tom Ziegmann
Microsoft Certified Professional
Windows Vista / Server Longhorn Technical Beta Tester
Windows Server 2003 Service Pack 2 Technical Beta Tester
 
Hello Yoda,

Can you please upload the contents of your $windows.bt$\panther folder

Tom Ziegmann
Microsoft Certified Professional
Windows Vista / Server Longhorn Technical Beta Tester
Windows Server 2003 Service Pack 2 Technical Beta Tester
 
Hey Tom,

There are seven files and a sub-folder named setup.exe in the
$windows.bt$\panther folder. Do you have an FTP location to send them to or
were you looking for the contents of a specific file?

Thanks,

Gary
 
One more thing Tom.

The contents of the setuperr.log is:

2006-08-29 18:44:25, Error MIG AddDriverFiles:
SetupDiBuildDriverInfoList failed[gle=0x00000002]

The other log file setupact.lot is quite long. What follows are entries
other then Info:

2006-08-29 18:38:35, Warning MIG Failed to open Cpls key.
Error 2.
2006-08-29 18:44:25, Error MIG AddDriverFiles:
SetupDiBuildDriverInfoList failed[gle=0x00000002]
2006-08-29 18:44:33, Warning DIAG DoWatsonReporting: Not
able to initialize Diagnostics Error Reporting, Err=87
2006-08-29 18:44:33, Warning DIAG
CollectAndSendDiagDataToWatson: Failed to report to Watson dwRet=87
2006-08-29 18:44:33, Warning DIAG
CallBack_DiagnosticDataSend: Not able to collect and send data to Watson,
GLE=87


Thanks,

Gary
 
I am having the same problem. As a matter of fact, this was a problem during
Beta 2 and I did not pursue it. The contents of my setuperr.log contains
only one line and it is the exact same line as in your log
"setupdibuildriverinfolist failed[gle=0x00000002]

Mike
 
Vista in Tampa said:
I am trying to upgrade Vista Beta 2 to RC-1. It makes it fine throught the
compatibility test. When it reaches 10% on the file copy task it simply says
that it encountered an error and terminates the install.

Is anyone else encountering this problem. Any known fixes?
Click to expand...

Having the same problem here, keeps telling me "Windows cannot install
required files. Make sure all files required for installation are available,
and restart the installation."

My setuperr log is as follows:

2006-08-30 13:31:48, Error [0x06413b] IBSLIB MarkBootDrive: Error
opening file "D:\$installdrive$" to mark boot drive.[gle=0x000003ed]
2006-08-30 13:31:48, Error [0x0641ae] IBSLIB
PrepareInstallDriveCheckpoint: Failed to mark($installdrive$) install
drive(D:).[gle=0x000003ed]
2006-08-30 13:31:48, Error [0x064199] IBSLIB
SetCheckpoint(WinPEPrepareInstallDriveCheckpoint): threw exception.: class
RollbackException: RollbackException: Error(1005),
PrepareInstallDriveCheckpoint: Failed to mark drive..
void __thiscall
OSRollbackService::CPrepareInstallDriveCheckpoint::Finalize(const unsigned
short *,struct OSRollbackService::ICheckpointParameters *)
[gle=0x000003ed]
2006-08-30 13:31:48, Error [0x06418a] IBSLIB
RollbackSetCheckpoint(WinPEPrepareInstallDriveCheckpoint): threw exception.:
class RollbackException: RollbackException: Error(1005),
PrepareInstallDriveCheckpoint: Failed to mark drive..
void __thiscall
OSRollbackService::CCheckpointImpressario::SetCheckpoint(const unsigned short
*,struct OSRollbackService::ICheckpointParameters *)
void __thiscall
OSRollbackService::CPrepareInstallDriveCheckpoint::Finalize(const unsigned
short *,struct OSRollbackService::ICheckpointParameters *)
[gle=0x000003ed]
2006-08-30 13:31:48, Error [0x06414e] IBSLIB
RollbackSetCheckpoint(WinPEPrepareInstallDriveCheckpoint) failed. Disabling
Rollback.[gle=0x000003ed]
2006-08-30 13:31:48, Error [0x060557] IBS IBSSetCheckpoint: Couldn't
set checkpoint [WinPEPrepareInstallDriveCheckpoint]![gle=0x000003ed]
2006-08-30 13:31:48, Error [0x06038d] IBS CallBack_CreatePageFile:An
error occurred while creating page file. GLE is [0x0] and status code is
[0xC000014F][gle=0x000000b7]
2006-08-30 13:31:48, Error [0x0600a3] IBS
LayDownImage:WIMSetTemporaryPath failed.[gle=0x00000003]
2006-08-30 13:31:48, Error [0x060096] IBS PrepareImageTransfer:An
error occurred while laying down the image; GLE = 0x3
2006-08-30 13:31:48, Error [0x060082] IBS
CallBack_ImageTransfer:Failed to lay down the image; GLE = 0x3
 
Hello All,

Please FTP to the following website and upload your $windows.bt\sources\panther
or windows\panther folder. Please create a new folder with your Newsgroup
user name so I know whose log files are whose.

ftp://www.desertbighorn.com

Username:vistacpp
Password:cpphelp

Tom Ziegmann
Microsoft Certified Professional
Windows Vista / Server Longhorn Technical Beta Tester
Windows Server 2003 Service Pack 2 Technical Beta Tester
Vista in Tampa said:
I am trying to upgrade Vista Beta 2 to RC-1. It makes it fine
throught the compatibility test. When it reaches 10% on the file
copy task it simply says that it encountered an error and terminates
the install.

Is anyone else encountering this problem. Any known fixes?
Click to expand...
Having the same problem here, keeps telling me "Windows cannot install
required files. Make sure all files required for installation are
available, and restart the installation."

My setuperr log is as follows:

2006-08-30 13:31:48, Error [0x06413b] IBSLIB MarkBootDrive: Error
opening file "D:\$installdrive$" to mark boot drive.[gle=0x000003ed]
2006-08-30 13:31:48, Error [0x0641ae] IBSLIB
PrepareInstallDriveCheckpoint: Failed to mark($installdrive$) install
drive(D:).[gle=0x000003ed]
2006-08-30 13:31:48, Error [0x064199] IBSLIB
SetCheckpoint(WinPEPrepareInstallDriveCheckpoint): threw exception.:
class
RollbackException: RollbackException: Error(1005),
PrepareInstallDriveCheckpoint: Failed to mark drive..
void __thiscall
OSRollbackService::CPrepareInstallDriveCheckpoint::Finalize(const
unsigned
short *,struct OSRollbackService::ICheckpointParameters *)
[gle=0x000003ed]
2006-08-30 13:31:48, Error [0x06418a] IBSLIB
RollbackSetCheckpoint(WinPEPrepareInstallDriveCheckpoint): threw
exception.:
class RollbackException: RollbackException: Error(1005),
PrepareInstallDriveCheckpoint: Failed to mark drive..
void __thiscall
OSRollbackService::CCheckpointImpressario::SetCheckpoint(const
unsigned short
*,struct OSRollbackService::ICheckpointParameters *)
void __thiscall
OSRollbackService::CPrepareInstallDriveCheckpoint::Finalize(const
unsigned
short *,struct OSRollbackService::ICheckpointParameters *)
[gle=0x000003ed]
2006-08-30 13:31:48, Error [0x06414e] IBSLIB
RollbackSetCheckpoint(WinPEPrepareInstallDriveCheckpoint) failed.
Disabling
Rollback.[gle=0x000003ed]
2006-08-30 13:31:48, Error [0x060557] IBS IBSSetCheckpoint:
Couldn't
set checkpoint [WinPEPrepareInstallDriveCheckpoint]![gle=0x000003ed]
2006-08-30 13:31:48, Error [0x06038d] IBS
CallBack_CreatePageFile:An
error occurred while creating page file. GLE is [0x0] and status code
is
[0xC000014F][gle=0x000000b7]
2006-08-30 13:31:48, Error [0x0600a3] IBS
LayDownImage:WIMSetTemporaryPath failed.[gle=0x00000003]
2006-08-30 13:31:48, Error [0x060096] IBS
PrepareImageTransfer:An
error occurred while laying down the image; GLE = 0x3
2006-08-30 13:31:48, Error [0x060082] IBS
CallBack_ImageTransfer:Failed to lay down the image; GLE = 0x
Click to expand...
 
Hey Tom,

When trying to login I receive an authentication error after entering the
password. Both the address and userID appear to work.

Any thoughts?

Thanks,

Gary

Tom Ziegmann said:
Hello All,

Please FTP to the following website and upload your $windows.bt\sources\panther
or windows\panther folder. Please create a new folder with your Newsgroup
user name so I know whose log files are whose.

ftp://www.desertbighorn.com

Username:vistacpp
Password:cpphelp

Tom Ziegmann
Microsoft Certified Professional
Windows Vista / Server Longhorn Technical Beta Tester
Windows Server 2003 Service Pack 2 Technical Beta Tester
Vista in Tampa said:
I am trying to upgrade Vista Beta 2 to RC-1. It makes it fine
throught the compatibility test. When it reaches 10% on the file
copy task it simply says that it encountered an error and terminates
the install.

Is anyone else encountering this problem. Any known fixes?
Click to expand...
Having the same problem here, keeps telling me "Windows cannot install
required files. Make sure all files required for installation are
available, and restart the installation."

My setuperr log is as follows:

2006-08-30 13:31:48, Error [0x06413b] IBSLIB MarkBootDrive: Error
opening file "D:\$installdrive$" to mark boot drive.[gle=0x000003ed]
2006-08-30 13:31:48, Error [0x0641ae] IBSLIB
PrepareInstallDriveCheckpoint: Failed to mark($installdrive$) install
drive(D:).[gle=0x000003ed]
2006-08-30 13:31:48, Error [0x064199] IBSLIB
SetCheckpoint(WinPEPrepareInstallDriveCheckpoint): threw exception.:
class
RollbackException: RollbackException: Error(1005),
PrepareInstallDriveCheckpoint: Failed to mark drive..
void __thiscall
OSRollbackService::CPrepareInstallDriveCheckpoint::Finalize(const
unsigned
short *,struct OSRollbackService::ICheckpointParameters *)
[gle=0x000003ed]
2006-08-30 13:31:48, Error [0x06418a] IBSLIB
RollbackSetCheckpoint(WinPEPrepareInstallDriveCheckpoint): threw
exception.:
class RollbackException: RollbackException: Error(1005),
PrepareInstallDriveCheckpoint: Failed to mark drive..
void __thiscall
OSRollbackService::CCheckpointImpressario::SetCheckpoint(const
unsigned short
*,struct OSRollbackService::ICheckpointParameters *)
void __thiscall
OSRollbackService::CPrepareInstallDriveCheckpoint::Finalize(const
unsigned
short *,struct OSRollbackService::ICheckpointParameters *)
[gle=0x000003ed]
2006-08-30 13:31:48, Error [0x06414e] IBSLIB
RollbackSetCheckpoint(WinPEPrepareInstallDriveCheckpoint) failed.
Disabling
Rollback.[gle=0x000003ed]
2006-08-30 13:31:48, Error [0x060557] IBS IBSSetCheckpoint:
Couldn't
set checkpoint [WinPEPrepareInstallDriveCheckpoint]![gle=0x000003ed]
2006-08-30 13:31:48, Error [0x06038d] IBS
CallBack_CreatePageFile:An
error occurred while creating page file. GLE is [0x0] and status code
is
[0xC000014F][gle=0x000000b7]
2006-08-30 13:31:48, Error [0x0600a3] IBS
LayDownImage:WIMSetTemporaryPath failed.[gle=0x00000003]
2006-08-30 13:31:48, Error [0x060096] IBS
PrepareImageTransfer:An
error occurred while laying down the image; GLE = 0x3
2006-08-30 13:31:48, Error [0x060082] IBS
CallBack_ImageTransfer:Failed to lay down the image; GLE = 0x3
Click to expand...
Click to expand...
 
Hello Gary,


The username was incorrect..my fault.

Username:[email protected]
Password:cpphelp

Tom Ziegmann
Microsoft Certified Professional
Windows Vista / Server Longhorn Technical Beta Tester
Windows Server 2003 Service Pack 2 Technical Beta Tester
Hey Tom,

When trying to login I receive an authentication error after entering
the password. Both the address and userID appear to work.

Any thoughts?

Thanks,

Gary

Tom Ziegmann said:
Hello All,

Please FTP to the following website and upload your
$windows.bt\sources\panther or windows\panther folder. Please create
a new folder with your Newsgroup user name so I know whose log files
are whose.

ftp://www.desertbighorn.com

Username:vistacpp
Password:cpphelp
Tom Ziegmann
Microsoft Certified Professional
Windows Vista / Server Longhorn Technical Beta Tester
Windows Server 2003 Service Pack 2 Technical Beta Tester
:

I am trying to upgrade Vista Beta 2 to RC-1. It makes it fine
throught the compatibility test. When it reaches 10% on the file
copy task it simply says that it encountered an error and
terminates the install.

Is anyone else encountering this problem. Any known fixes?

Having the same problem here, keeps telling me "Windows cannot
install required files. Make sure all files required for
installation are available, and restart the installation."

My setuperr log is as follows:

2006-08-30 13:31:48, Error [0x06413b] IBSLIB MarkBootDrive:
Error
opening file "D:\$installdrive$" to mark boot drive.[gle=0x000003ed]
2006-08-30 13:31:48, Error [0x0641ae] IBSLIB
PrepareInstallDriveCheckpoint: Failed to mark($installdrive$)
install
drive(D:).[gle=0x000003ed]
2006-08-30 13:31:48, Error [0x064199] IBSLIB
SetCheckpoint(WinPEPrepareInstallDriveCheckpoint): threw exception.:
class
RollbackException: RollbackException: Error(1005),
PrepareInstallDriveCheckpoint: Failed to mark drive..
void __thiscall
OSRollbackService::CPrepareInstallDriveCheckpoint::Finalize(const
unsigned
short *,struct OSRollbackService::ICheckpointParameters *)
[gle=0x000003ed]
2006-08-30 13:31:48, Error [0x06418a] IBSLIB
RollbackSetCheckpoint(WinPEPrepareInstallDriveCheckpoint): threw
exception.:
class RollbackException: RollbackException: Error(1005),
PrepareInstallDriveCheckpoint: Failed to mark drive..
void __thiscall
OSRollbackService::CCheckpointImpressario::SetCheckpoint(const
unsigned short
*,struct OSRollbackService::ICheckpointParameters *)
void __thiscall
OSRollbackService::CPrepareInstallDriveCheckpoint::Finalize(const
unsigned
short *,struct OSRollbackService::ICheckpointParameters *)
[gle=0x000003ed]
2006-08-30 13:31:48, Error [0x06414e] IBSLIB
RollbackSetCheckpoint(WinPEPrepareInstallDriveCheckpoint) failed.
Disabling
Rollback.[gle=0x000003ed]
2006-08-30 13:31:48, Error [0x060557] IBS IBSSetCheckpoint:
Couldn't
set checkpoint [WinPEPrepareInstallDriveCheckpoint]![gle=0x000003ed]
2006-08-30 13:31:48, Error [0x06038d] IBS
CallBack_CreatePageFile:An
error occurred while creating page file. GLE is [0x0] and status
code
is
[0xC000014F][gle=0x000000b7]
2006-08-30 13:31:48, Error [0x0600a3] IBS
LayDownImage:WIMSetTemporaryPath failed.[gle=0x00000003]
2006-08-30 13:31:48, Error [0x060096] IBS
PrepareImageTransfer:An
error occurred while laying down the image; GLE = 0x3
2006-08-30 13:31:48, Error [0x060082] IBS
CallBack_ImageTransfer:Failed to lay down the image; GLE = 0x3
Click to expand...
Click to expand...
Click to expand...
 
Tom,

The FTP site is not accepting the password you provided

Tom Ziegmann said:
Hello All,

Please FTP to the following website and upload your $windows.bt\sources\panther
or windows\panther folder. Please create a new folder with your Newsgroup
user name so I know whose log files are whose.

ftp://www.desertbighorn.com

Username:vistacpp
Password:cpphelp

Tom Ziegmann
Microsoft Certified Professional
Windows Vista / Server Longhorn Technical Beta Tester
Windows Server 2003 Service Pack 2 Technical Beta Tester
Vista in Tampa said:
I am trying to upgrade Vista Beta 2 to RC-1. It makes it fine
throught the compatibility test. When it reaches 10% on the file
copy task it simply says that it encountered an error and terminates
the install.

Is anyone else encountering this problem. Any known fixes?
Click to expand...
Having the same problem here, keeps telling me "Windows cannot install
required files. Make sure all files required for installation are
available, and restart the installation."

My setuperr log is as follows:

2006-08-30 13:31:48, Error [0x06413b] IBSLIB MarkBootDrive: Error
opening file "D:\$installdrive$" to mark boot drive.[gle=0x000003ed]
2006-08-30 13:31:48, Error [0x0641ae] IBSLIB
PrepareInstallDriveCheckpoint: Failed to mark($installdrive$) install
drive(D:).[gle=0x000003ed]
2006-08-30 13:31:48, Error [0x064199] IBSLIB
SetCheckpoint(WinPEPrepareInstallDriveCheckpoint): threw exception.:
class
RollbackException: RollbackException: Error(1005),
PrepareInstallDriveCheckpoint: Failed to mark drive..
void __thiscall
OSRollbackService::CPrepareInstallDriveCheckpoint::Finalize(const
unsigned
short *,struct OSRollbackService::ICheckpointParameters *)
[gle=0x000003ed]
2006-08-30 13:31:48, Error [0x06418a] IBSLIB
RollbackSetCheckpoint(WinPEPrepareInstallDriveCheckpoint): threw
exception.:
class RollbackException: RollbackException: Error(1005),
PrepareInstallDriveCheckpoint: Failed to mark drive..
void __thiscall
OSRollbackService::CCheckpointImpressario::SetCheckpoint(const
unsigned short
*,struct OSRollbackService::ICheckpointParameters *)
void __thiscall
OSRollbackService::CPrepareInstallDriveCheckpoint::Finalize(const
unsigned
short *,struct OSRollbackService::ICheckpointParameters *)
[gle=0x000003ed]
2006-08-30 13:31:48, Error [0x06414e] IBSLIB
RollbackSetCheckpoint(WinPEPrepareInstallDriveCheckpoint) failed.
Disabling
Rollback.[gle=0x000003ed]
2006-08-30 13:31:48, Error [0x060557] IBS IBSSetCheckpoint:
Couldn't
set checkpoint [WinPEPrepareInstallDriveCheckpoint]![gle=0x000003ed]
2006-08-30 13:31:48, Error [0x06038d] IBS
CallBack_CreatePageFile:An
error occurred while creating page file. GLE is [0x0] and status code
is
[0xC000014F][gle=0x000000b7]
2006-08-30 13:31:48, Error [0x0600a3] IBS
LayDownImage:WIMSetTemporaryPath failed.[gle=0x00000003]
2006-08-30 13:31:48, Error [0x060096] IBS
PrepareImageTransfer:An
error occurred while laying down the image; GLE = 0x3
2006-08-30 13:31:48, Error [0x060082] IBS
CallBack_ImageTransfer:Failed to lay down the image; GLE = 0x3
Click to expand...
Click to expand...
 
Tom,

The password for (e-mail address removed) did not work either


Tom Ziegmann said:
Hello Gary,


The username was incorrect..my fault.

Username:[email protected]
Password:cpphelp

Tom Ziegmann
Microsoft Certified Professional
Windows Vista / Server Longhorn Technical Beta Tester
Windows Server 2003 Service Pack 2 Technical Beta Tester
Hey Tom,

When trying to login I receive an authentication error after entering
the password. Both the address and userID appear to work.

Any thoughts?

Thanks,

Gary

Tom Ziegmann said:
Hello All,

Please FTP to the following website and upload your
$windows.bt\sources\panther or windows\panther folder. Please create
a new folder with your Newsgroup user name so I know whose log files
are whose.

ftp://www.desertbighorn.com

Username:vistacpp
Password:cpphelp
Tom Ziegmann
Microsoft Certified Professional
Windows Vista / Server Longhorn Technical Beta Tester
Windows Server 2003 Service Pack 2 Technical Beta Tester
:

I am trying to upgrade Vista Beta 2 to RC-1. It makes it fine
throught the compatibility test. When it reaches 10% on the file
copy task it simply says that it encountered an error and
terminates the install.

Is anyone else encountering this problem. Any known fixes?

Having the same problem here, keeps telling me "Windows cannot
install required files. Make sure all files required for
installation are available, and restart the installation."

My setuperr log is as follows:

2006-08-30 13:31:48, Error [0x06413b] IBSLIB MarkBootDrive:
Error
opening file "D:\$installdrive$" to mark boot drive.[gle=0x000003ed]
2006-08-30 13:31:48, Error [0x0641ae] IBSLIB
PrepareInstallDriveCheckpoint: Failed to mark($installdrive$)
install
drive(D:).[gle=0x000003ed]
2006-08-30 13:31:48, Error [0x064199] IBSLIB
SetCheckpoint(WinPEPrepareInstallDriveCheckpoint): threw exception.:
class
RollbackException: RollbackException: Error(1005),
PrepareInstallDriveCheckpoint: Failed to mark drive..
void __thiscall
OSRollbackService::CPrepareInstallDriveCheckpoint::Finalize(const
unsigned
short *,struct OSRollbackService::ICheckpointParameters *)
[gle=0x000003ed]
2006-08-30 13:31:48, Error [0x06418a] IBSLIB
RollbackSetCheckpoint(WinPEPrepareInstallDriveCheckpoint): threw
exception.:
class RollbackException: RollbackException: Error(1005),
PrepareInstallDriveCheckpoint: Failed to mark drive..
void __thiscall
OSRollbackService::CCheckpointImpressario::SetCheckpoint(const
unsigned short
*,struct OSRollbackService::ICheckpointParameters *)
void __thiscall
OSRollbackService::CPrepareInstallDriveCheckpoint::Finalize(const
unsigned
short *,struct OSRollbackService::ICheckpointParameters *)
[gle=0x000003ed]
2006-08-30 13:31:48, Error [0x06414e] IBSLIB
RollbackSetCheckpoint(WinPEPrepareInstallDriveCheckpoint) failed.
Disabling
Rollback.[gle=0x000003ed]
2006-08-30 13:31:48, Error [0x060557] IBS IBSSetCheckpoint:
Couldn't
set checkpoint [WinPEPrepareInstallDriveCheckpoint]![gle=0x000003ed]
2006-08-30 13:31:48, Error [0x06038d] IBS
CallBack_CreatePageFile:An
error occurred while creating page file. GLE is [0x0] and status
code
is
[0xC000014F][gle=0x000000b7]
2006-08-30 13:31:48, Error [0x0600a3] IBS
LayDownImage:WIMSetTemporaryPath failed.[gle=0x00000003]
2006-08-30 13:31:48, Error [0x060096] IBS
PrepareImageTransfer:An
error occurred while laying down the image; GLE = 0x3
2006-08-30 13:31:48, Error [0x060082] IBS
CallBack_ImageTransfer:Failed to lay down the image; GLE = 0x3
Click to expand...
Click to expand...
Click to expand...
 
Hello Yoda,

Try this username and password

Username:[email protected]
Password:cpphelp

Tom Ziegmann
Microsoft Certified Professional
Windows Vista / Server Longhorn Technical Beta Tester
Windows Server 2003 Service Pack 2 Technical Beta Tester
Tom,

The FTP site is not accepting the password you provided

Tom Ziegmann said:
Hello All,

Please FTP to the following website and upload your
$windows.bt\sources\panther or windows\panther folder. Please create
a new folder with your Newsgroup user name so I know whose log files
are whose.

ftp://www.desertbighorn.com

Username:vistacpp
Password:cpphelp
Tom Ziegmann
Microsoft Certified Professional
Windows Vista / Server Longhorn Technical Beta Tester
Windows Server 2003 Service Pack 2 Technical Beta Tester
:

I am trying to upgrade Vista Beta 2 to RC-1. It makes it fine
throught the compatibility test. When it reaches 10% on the file
copy task it simply says that it encountered an error and
terminates the install.

Is anyone else encountering this problem. Any known fixes?

Having the same problem here, keeps telling me "Windows cannot
install required files. Make sure all files required for
installation are available, and restart the installation."

My setuperr log is as follows:

2006-08-30 13:31:48, Error [0x06413b] IBSLIB MarkBootDrive:
Error
opening file "D:\$installdrive$" to mark boot drive.[gle=0x000003ed]
2006-08-30 13:31:48, Error [0x0641ae] IBSLIB
PrepareInstallDriveCheckpoint: Failed to mark($installdrive$)
install
drive(D:).[gle=0x000003ed]
2006-08-30 13:31:48, Error [0x064199] IBSLIB
SetCheckpoint(WinPEPrepareInstallDriveCheckpoint): threw exception.:
class
RollbackException: RollbackException: Error(1005),
PrepareInstallDriveCheckpoint: Failed to mark drive..
void __thiscall
OSRollbackService::CPrepareInstallDriveCheckpoint::Finalize(const
unsigned
short *,struct OSRollbackService::ICheckpointParameters *)
[gle=0x000003ed]
2006-08-30 13:31:48, Error [0x06418a] IBSLIB
RollbackSetCheckpoint(WinPEPrepareInstallDriveCheckpoint): threw
exception.:
class RollbackException: RollbackException: Error(1005),
PrepareInstallDriveCheckpoint: Failed to mark drive..
void __thiscall
OSRollbackService::CCheckpointImpressario::SetCheckpoint(const
unsigned short
*,struct OSRollbackService::ICheckpointParameters *)
void __thiscall
OSRollbackService::CPrepareInstallDriveCheckpoint::Finalize(const
unsigned
short *,struct OSRollbackService::ICheckpointParameters *)
[gle=0x000003ed]
2006-08-30 13:31:48, Error [0x06414e] IBSLIB
RollbackSetCheckpoint(WinPEPrepareInstallDriveCheckpoint) failed.
Disabling
Rollback.[gle=0x000003ed]
2006-08-30 13:31:48, Error [0x060557] IBS IBSSetCheckpoint:
Couldn't
set checkpoint [WinPEPrepareInstallDriveCheckpoint]![gle=0x000003ed]
2006-08-30 13:31:48, Error [0x06038d] IBS
CallBack_CreatePageFile:An
error occurred while creating page file. GLE is [0x0] and status
code
is
[0xC000014F][gle=0x000000b7]
2006-08-30 13:31:48, Error [0x0600a3] IBS
LayDownImage:WIMSetTemporaryPath failed.[gle=0x00000003]
2006-08-30 13:31:48, Error [0x060096] IBS
PrepareImageTransfer:An
error occurred while laying down the image; GLE = 0x3
2006-08-30 13:31:48, Error [0x060082] IBS
CallBack_ImageTransfer:Failed to lay down the image; GLE = 0x3
Click to expand...
Click to expand...
Click to expand...
 
Hey Tom,

Something still appears to not be working properly. Here is the log for the
transaction if it helps:

Status: Connecting to www.desertbighorn.com ...
Status: Connected with www.desertbighorn.com. Waiting for welcome message...
Response: 220---------- Welcome to Pure-FTPd [TLS] ----------
Response: 220-You are user number 4 of 50 allowed.
Response: 220-Local time is now 17:15. Server port: 21.
Response: 220-IPv6 connections are also welcome on this server.
Response: 220 You will be disconnected after 15 minutes of inactivity.
Command: USER (e-mail address removed)
Response: 331 User (e-mail address removed) OK. Password required
Command: PASS *******
Response: 530 Authentication failed, sorry
Error: Unable to connect!

Any thoughts?

Thanks,

Gary

Tom Ziegmann said:
Hello Gary,


The username was incorrect..my fault.

Username:[email protected]
Password:cpphelp

Tom Ziegmann
Microsoft Certified Professional
Windows Vista / Server Longhorn Technical Beta Tester
Windows Server 2003 Service Pack 2 Technical Beta Tester
Hey Tom,

When trying to login I receive an authentication error after entering
the password. Both the address and userID appear to work.

Any thoughts?

Thanks,

Gary

Tom Ziegmann said:
Hello All,

Please FTP to the following website and upload your
$windows.bt\sources\panther or windows\panther folder. Please create
a new folder with your Newsgroup user name so I know whose log files
are whose.

ftp://www.desertbighorn.com

Username:vistacpp
Password:cpphelp
Tom Ziegmann
Microsoft Certified Professional
Windows Vista / Server Longhorn Technical Beta Tester
Windows Server 2003 Service Pack 2 Technical Beta Tester
:

I am trying to upgrade Vista Beta 2 to RC-1. It makes it fine
throught the compatibility test. When it reaches 10% on the file
copy task it simply says that it encountered an error and
terminates the install.

Is anyone else encountering this problem. Any known fixes?

Having the same problem here, keeps telling me "Windows cannot
install required files. Make sure all files required for
installation are available, and restart the installation."

My setuperr log is as follows:

2006-08-30 13:31:48, Error [0x06413b] IBSLIB MarkBootDrive:
Error
opening file "D:\$installdrive$" to mark boot drive.[gle=0x000003ed]
2006-08-30 13:31:48, Error [0x0641ae] IBSLIB
PrepareInstallDriveCheckpoint: Failed to mark($installdrive$)
install
drive(D:).[gle=0x000003ed]
2006-08-30 13:31:48, Error [0x064199] IBSLIB
SetCheckpoint(WinPEPrepareInstallDriveCheckpoint): threw exception.:
class
RollbackException: RollbackException: Error(1005),
PrepareInstallDriveCheckpoint: Failed to mark drive..
void __thiscall
OSRollbackService::CPrepareInstallDriveCheckpoint::Finalize(const
unsigned
short *,struct OSRollbackService::ICheckpointParameters *)
[gle=0x000003ed]
2006-08-30 13:31:48, Error [0x06418a] IBSLIB
RollbackSetCheckpoint(WinPEPrepareInstallDriveCheckpoint): threw
exception.:
class RollbackException: RollbackException: Error(1005),
PrepareInstallDriveCheckpoint: Failed to mark drive..
void __thiscall
OSRollbackService::CCheckpointImpressario::SetCheckpoint(const
unsigned short
*,struct OSRollbackService::ICheckpointParameters *)
void __thiscall
OSRollbackService::CPrepareInstallDriveCheckpoint::Finalize(const
unsigned
short *,struct OSRollbackService::ICheckpointParameters *)
[gle=0x000003ed]
2006-08-30 13:31:48, Error [0x06414e] IBSLIB
RollbackSetCheckpoint(WinPEPrepareInstallDriveCheckpoint) failed.
Disabling
Rollback.[gle=0x000003ed]
2006-08-30 13:31:48, Error [0x060557] IBS IBSSetCheckpoint:
Couldn't
set checkpoint [WinPEPrepareInstallDriveCheckpoint]![gle=0x000003ed]
2006-08-30 13:31:48, Error [0x06038d] IBS
CallBack_CreatePageFile:An
error occurred while creating page file. GLE is [0x0] and status
code
is
[0xC000014F][gle=0x000000b7]
2006-08-30 13:31:48, Error [0x0600a3] IBS
LayDownImage:WIMSetTemporaryPath failed.[gle=0x00000003]
2006-08-30 13:31:48, Error [0x060096] IBS
PrepareImageTransfer:An
error occurred while laying down the image; GLE = 0x3
2006-08-30 13:31:48, Error [0x060082] IBS
CallBack_ImageTransfer:Failed to lay down the image; GLE = 0x3
Click to expand...
Click to expand...
Click to expand...
 
Hello Gary,

I just got off the phone with my web host and they tech told me that the
www in the username needs to be removed and it should work. Sorry for all
the trouble.

Tom Ziegmann
Microsoft Certified Professional
Windows Vista / Server Longhorn Technical Beta Tester
Windows Server 2003 Service Pack 2 Technical Beta Tester
Hey Tom,

Something still appears to not be working properly. Here is the log
for the transaction if it helps:

Status: Connecting to www.desertbighorn.com ...
Status: Connected with www.desertbighorn.com. Waiting for welcome
message...
Response: 220---------- Welcome to Pure-FTPd [TLS] ----------
Response: 220-You are user number 4 of 50 allowed.
Response: 220-Local time is now 17:15. Server port: 21.
Response: 220-IPv6 connections are also welcome on this server.
Response: 220 You will be disconnected after 15 minutes of inactivity.
Command: USER (e-mail address removed)
Response: 331 User (e-mail address removed) OK. Password
required
Command: PASS *******
Response: 530 Authentication failed, sorry
Error: Unable to connect!
Any thoughts?

Thanks,

Gary

Tom Ziegmann said:
Hello Gary,

The username was incorrect..my fault.

Username:[email protected]
Password:cpphelp
Tom Ziegmann
Microsoft Certified Professional
Windows Vista / Server Longhorn Technical Beta Tester
Windows Server 2003 Service Pack 2 Technical Beta Tester
Hey Tom,

When trying to login I receive an authentication error after
entering the password. Both the address and userID appear to work.

Any thoughts?

Thanks,

Gary

:

Hello All,

Please FTP to the following website and upload your
$windows.bt\sources\panther or windows\panther folder. Please
create a new folder with your Newsgroup user name so I know whose
log files are whose.

ftp://www.desertbighorn.com

Username:vistacpp
Password:cpphelp
Tom Ziegmann
Microsoft Certified Professional
Windows Vista / Server Longhorn Technical Beta Tester
Windows Server 2003 Service Pack 2 Technical Beta Tester
:

I am trying to upgrade Vista Beta 2 to RC-1. It makes it fine
throught the compatibility test. When it reaches 10% on the file
copy task it simply says that it encountered an error and
terminates the install.

Is anyone else encountering this problem. Any known fixes?

Having the same problem here, keeps telling me "Windows cannot
install required files. Make sure all files required for
installation are available, and restart the installation."

My setuperr log is as follows:

2006-08-30 13:31:48, Error [0x06413b] IBSLIB MarkBootDrive:
Error
opening file "D:\$installdrive$" to mark boot
drive.[gle=0x000003ed]
2006-08-30 13:31:48, Error [0x0641ae] IBSLIB
PrepareInstallDriveCheckpoint: Failed to mark($installdrive$)
install
drive(D:).[gle=0x000003ed]
2006-08-30 13:31:48, Error [0x064199] IBSLIB
SetCheckpoint(WinPEPrepareInstallDriveCheckpoint): threw
exception.:
class
RollbackException: RollbackException: Error(1005),
PrepareInstallDriveCheckpoint: Failed to mark drive..
void __thiscall
OSRollbackService::CPrepareInstallDriveCheckpoint::Finalize(const
unsigned
short *,struct OSRollbackService::ICheckpointParameters *)
[gle=0x000003ed]
2006-08-30 13:31:48, Error [0x06418a] IBSLIB
RollbackSetCheckpoint(WinPEPrepareInstallDriveCheckpoint): threw
exception.:
class RollbackException: RollbackException: Error(1005),
PrepareInstallDriveCheckpoint: Failed to mark drive..
void __thiscall
OSRollbackService::CCheckpointImpressario::SetCheckpoint(const
unsigned short
*,struct OSRollbackService::ICheckpointParameters *)
void __thiscall
OSRollbackService::CPrepareInstallDriveCheckpoint::Finalize(const
unsigned
short *,struct OSRollbackService::ICheckpointParameters *)
[gle=0x000003ed]
2006-08-30 13:31:48, Error [0x06414e] IBSLIB
RollbackSetCheckpoint(WinPEPrepareInstallDriveCheckpoint) failed.
Disabling
Rollback.[gle=0x000003ed]
2006-08-30 13:31:48, Error [0x060557] IBS
IBSSetCheckpoint:
Couldn't
set checkpoint
[WinPEPrepareInstallDriveCheckpoint]![gle=0x000003ed]
2006-08-30 13:31:48, Error [0x06038d] IBS
CallBack_CreatePageFile:An
error occurred while creating page file. GLE is [0x0] and status
code
is
[0xC000014F][gle=0x000000b7]
2006-08-30 13:31:48, Error [0x0600a3] IBS
LayDownImage:WIMSetTemporaryPath failed.[gle=0x00000003]
2006-08-30 13:31:48, Error [0x060096] IBS
PrepareImageTransfer:An
error occurred while laying down the image; GLE = 0x3
2006-08-30 13:31:48, Error [0x060082] IBS
CallBack_ImageTransfer:Failed to lay down the image; GLE = 0x3
Click to expand...
Click to expand...
Click to expand...
 
The username is incorrect once again...sorry

Username:[email protected]

Tom Ziegmann
Microsoft Certified Professional
Windows Vista / Server Longhorn Technical Beta Tester
Windows Server 2003 Service Pack 2 Technical Beta Tester
Hello Yoda,

Try this username and password

Username:[email protected]
Password:cpphelp
Tom Ziegmann
Microsoft Certified Professional
Windows Vista / Server Longhorn Technical Beta Tester
Windows Server 2003 Service Pack 2 Technical Beta Tester
Tom,

The FTP site is not accepting the password you provided

Tom Ziegmann said:
Hello All,

Please FTP to the following website and upload your
$windows.bt\sources\panther or windows\panther folder. Please create
a new folder with your Newsgroup user name so I know whose log files
are whose.

ftp://www.desertbighorn.com

Username:vistacpp
Password:cpphelp
Tom Ziegmann
Microsoft Certified Professional
Windows Vista / Server Longhorn Technical Beta Tester
Windows Server 2003 Service Pack 2 Technical Beta Tester
:

I am trying to upgrade Vista Beta 2 to RC-1. It makes it fine
throught the compatibility test. When it reaches 10% on the file
copy task it simply says that it encountered an error and
terminates the install.

Is anyone else encountering this problem. Any known fixes?

Having the same problem here, keeps telling me "Windows cannot
install required files. Make sure all files required for
installation are available, and restart the installation."

My setuperr log is as follows:

2006-08-30 13:31:48, Error [0x06413b] IBSLIB MarkBootDrive:
Error
opening file "D:\$installdrive$" to mark boot
drive.[gle=0x000003ed]
2006-08-30 13:31:48, Error [0x0641ae] IBSLIB
PrepareInstallDriveCheckpoint: Failed to mark($installdrive$)
install
drive(D:).[gle=0x000003ed]
2006-08-30 13:31:48, Error [0x064199] IBSLIB
SetCheckpoint(WinPEPrepareInstallDriveCheckpoint): threw
exception.:
class
RollbackException: RollbackException: Error(1005),
PrepareInstallDriveCheckpoint: Failed to mark drive..
void __thiscall
OSRollbackService::CPrepareInstallDriveCheckpoint::Finalize(const
unsigned
short *,struct OSRollbackService::ICheckpointParameters *)
[gle=0x000003ed]
2006-08-30 13:31:48, Error [0x06418a] IBSLIB
RollbackSetCheckpoint(WinPEPrepareInstallDriveCheckpoint): threw
exception.:
class RollbackException: RollbackException: Error(1005),
PrepareInstallDriveCheckpoint: Failed to mark drive..
void __thiscall
OSRollbackService::CCheckpointImpressario::SetCheckpoint(const
unsigned short
*,struct OSRollbackService::ICheckpointParameters *)
void __thiscall
OSRollbackService::CPrepareInstallDriveCheckpoint::Finalize(const
unsigned
short *,struct OSRollbackService::ICheckpointParameters *)
[gle=0x000003ed]
2006-08-30 13:31:48, Error [0x06414e] IBSLIB
RollbackSetCheckpoint(WinPEPrepareInstallDriveCheckpoint) failed.
Disabling
Rollback.[gle=0x000003ed]
2006-08-30 13:31:48, Error [0x060557] IBS IBSSetCheckpoint:
Couldn't
set checkpoint
[WinPEPrepareInstallDriveCheckpoint]![gle=0x000003ed]
2006-08-30 13:31:48, Error [0x06038d] IBS
CallBack_CreatePageFile:An
error occurred while creating page file. GLE is [0x0] and status
code
is
[0xC000014F][gle=0x000000b7]
2006-08-30 13:31:48, Error [0x0600a3] IBS
LayDownImage:WIMSetTemporaryPath failed.[gle=0x00000003]
2006-08-30 13:31:48, Error [0x060096] IBS
PrepareImageTransfer:An
error occurred while laying down the image; GLE = 0x3
2006-08-30 13:31:48, Error [0x060082] IBS
CallBack_ImageTransfer:Failed to lay down the image; GLE = 0x3
Click to expand...
Click to expand...
Click to expand...
 
I am having the same issue

Tom Ziegmann said:
The username is incorrect once again...sorry

Username:[email protected]

Tom Ziegmann
Microsoft Certified Professional
Windows Vista / Server Longhorn Technical Beta Tester
Windows Server 2003 Service Pack 2 Technical Beta Tester
Hello Yoda,

Try this username and password

Username:[email protected]
Password:cpphelp
Tom Ziegmann
Microsoft Certified Professional
Windows Vista / Server Longhorn Technical Beta Tester
Windows Server 2003 Service Pack 2 Technical Beta Tester
Tom,

The FTP site is not accepting the password you provided

:

Hello All,

Please FTP to the following website and upload your
$windows.bt\sources\panther or windows\panther folder. Please create
a new folder with your Newsgroup user name so I know whose log files
are whose.

ftp://www.desertbighorn.com

Username:vistacpp
Password:cpphelp
Tom Ziegmann
Microsoft Certified Professional
Windows Vista / Server Longhorn Technical Beta Tester
Windows Server 2003 Service Pack 2 Technical Beta Tester
:

I am trying to upgrade Vista Beta 2 to RC-1. It makes it fine
throught the compatibility test. When it reaches 10% on the file
copy task it simply says that it encountered an error and
terminates the install.

Is anyone else encountering this problem. Any known fixes?

Having the same problem here, keeps telling me "Windows cannot
install required files. Make sure all files required for
installation are available, and restart the installation."

My setuperr log is as follows:

2006-08-30 13:31:48, Error [0x06413b] IBSLIB MarkBootDrive:
Error
opening file "D:\$installdrive$" to mark boot
drive.[gle=0x000003ed]
2006-08-30 13:31:48, Error [0x0641ae] IBSLIB
PrepareInstallDriveCheckpoint: Failed to mark($installdrive$)
install
drive(D:).[gle=0x000003ed]
2006-08-30 13:31:48, Error [0x064199] IBSLIB
SetCheckpoint(WinPEPrepareInstallDriveCheckpoint): threw
exception.:
class
RollbackException: RollbackException: Error(1005),
PrepareInstallDriveCheckpoint: Failed to mark drive..
void __thiscall
OSRollbackService::CPrepareInstallDriveCheckpoint::Finalize(const
unsigned
short *,struct OSRollbackService::ICheckpointParameters *)
[gle=0x000003ed]
2006-08-30 13:31:48, Error [0x06418a] IBSLIB
RollbackSetCheckpoint(WinPEPrepareInstallDriveCheckpoint): threw
exception.:
class RollbackException: RollbackException: Error(1005),
PrepareInstallDriveCheckpoint: Failed to mark drive..
void __thiscall
OSRollbackService::CCheckpointImpressario::SetCheckpoint(const
unsigned short
*,struct OSRollbackService::ICheckpointParameters *)
void __thiscall
OSRollbackService::CPrepareInstallDriveCheckpoint::Finalize(const
unsigned
short *,struct OSRollbackService::ICheckpointParameters *)
[gle=0x000003ed]
2006-08-30 13:31:48, Error [0x06414e] IBSLIB
RollbackSetCheckpoint(WinPEPrepareInstallDriveCheckpoint) failed.
Disabling
Rollback.[gle=0x000003ed]
2006-08-30 13:31:48, Error [0x060557] IBS IBSSetCheckpoint:
Couldn't
set checkpoint
[WinPEPrepareInstallDriveCheckpoint]![gle=0x000003ed]
2006-08-30 13:31:48, Error [0x06038d] IBS
CallBack_CreatePageFile:An
error occurred while creating page file. GLE is [0x0] and status
code
is
[0xC000014F][gle=0x000000b7]
2006-08-30 13:31:48, Error [0x0600a3] IBS
LayDownImage:WIMSetTemporaryPath failed.[gle=0x00000003]
2006-08-30 13:31:48, Error [0x060096] IBS
PrepareImageTransfer:An
error occurred while laying down the image; GLE = 0x3
2006-08-30 13:31:48, Error [0x060082] IBS
CallBack_ImageTransfer:Failed to lay down the image; GLE = 0x3
Click to expand...
Click to expand...
Click to expand...
 
Back
Top