Try out a program called Wake on LAN (
http://www.depicus.com/wake-on-lan/)
For it to work your BIOS needs to have a setting like Remote wake up or
something set to on. I own a Dell GX270 and a GX110 and they both have that
setting and both are at least 2 years old, so i'm sure your server will have
this setting
Another couple of things that you need for this program (which needs to be
able to run on you WORK computer) is that it is "supposed" to work over the
internet (i've never tried it b4). Just make sure your power supply is on,
you know ur MAC address, your subnet mask, and if you have a router or
something with NAT (or NAPT) that you forward a port (and remember which
one)
Good luck to you, and i must admit the reply about pressing the button in
the morning was quite funny
------------------------------------------------------------
Jayso
Please reply to this email so I know if i'm right
Good in Home Networking, XP Home based problems, and Pro based Problems
Add my email to MSN Messenger if u wish
(e-mail address removed) (remove spamfree)
----- Original Message -----
From: "networm" <
[email protected]>
Newsgroups:
microsoft.public.windowsxp.hardware,microsoft.public.windowsxp.general,microsoft.public.windowsxp.setup_deployment
Sent: Sunday, August 21, 2005 2:18 PM
Subject: Is there a way to set up the XP to automatically power-on?