How to connect my Windows 2000 to two LAN's?

[Dmitry Kopnichev]

Hello
How to connect two RJ-45 cables from two LAN's to my Windows 2000 computer
for it to use resources of both LAN's? I have one installed Network Card and
a Network Switch - 3Com OfficeConnect Switch 8.

 

[EventHelix.com]

You will need a LAN adaptor that supports the 802.3ad standard. Check
the vendor website to see if they have a driver that supports 802.3ad.

 

[Phillip Windell]

Hello
How to connect two RJ-45 cables from two LAN's to my Windows 2000 computer
for it to use resources of both LAN's? I have one installed Network Card and
a Network Switch - 3Com OfficeConnect Switch 8.

If they run the same set of addresses (without duplicates), which is very
common with small networks, then you only really have one LAN that is
physically separated into two physical wires. Just join the two physical
segments at one of the switches.

If they are different incompatible address ranges for each, then the "right"
way to do it is place a LAN Router between them instead of sticking a PC
between them.

There isn't anything else I could say without knowing all the details and
the reasons behind them.

--
Phillip Windell [MCP, MVP, CCNA]
www.wandtv.com
-----------------------------------------------------
Understanding the ISA 2004 Access Rule Processing
http://www.isaserver.org/articles/ISA2004_AccessRules.html

Microsoft Internet Security & Acceleration Server: Guidance
http://www.microsoft.com/isaserver/techinfo/Guidance/2004.asp
http://www.microsoft.com/isaserver/techinfo/Guidance/2000.asp

Microsoft Internet Security & Acceleration Server: Partners
http://www.microsoft.com/isaserver/partners/default.asp
-----------------------------------------------------

 

[Dmitry Kopnichev]

Thanks for your reply.
How to know if they run the same set of addresses (without duplicates)? The
networks contain about 500 Windows 2000 computers each. Joining one of the
networks does not give resources of the other.
What is a cheaper way to get resources of the both networks for my computer?

Hello
How to connect two RJ-45 cables from two LAN's to my Windows 2000 computer
for it to use resources of both LAN's? I have one installed Network Card and
a Network Switch - 3Com OfficeConnect Switch 8.

If they run the same set of addresses (without duplicates), which is very
common with small networks, then you only really have one LAN that is
physically separated into two physical wires. Just join the two physical
segments at one of the switches.

If they are different incompatible address ranges for each, then the "right"
way to do it is place a LAN Router between them instead of sticking a PC
between them.

There isn't anything else I could say without knowing all the details and
the reasons behind them.

--
Phillip Windell [MCP, MVP, CCNA]
www.wandtv.com
-----------------------------------------------------
Understanding the ISA 2004 Access Rule Processing
http://www.isaserver.org/articles/ISA2004_AccessRules.html

Microsoft Internet Security & Acceleration Server: Guidance
http://www.microsoft.com/isaserver/techinfo/Guidance/2004.asp
http://www.microsoft.com/isaserver/techinfo/Guidance/2000.asp

Microsoft Internet Security & Acceleration Server: Partners
http://www.microsoft.com/isaserver/partners/default.asp

 

[Dmitry Kopnichev]

Thanks for your reply.
Do you mean a Network Card by LAN adaptor?

 

[Dmitry Kopnichev]

I can get access to both networks interchangeably now by inserting the RJ-45
cables to my installed NIC. IP address and address of DNS-server are got
automatically in TCP/IP properties.
How to get access to both networks at the same time?

Hello
How to connect two RJ-45 cables from two LAN's to my Windows 2000 computer
for it to use resources of both LAN's? I have one installed Network Card and
a Network Switch - 3Com OfficeConnect Switch 8.

If they run the same set of addresses (without duplicates), which is very
common with small networks, then you only really have one LAN that is
physically separated into two physical wires. Just join the two physical
segments at one of the switches.

If they are different incompatible address ranges for each, then the "right"
way to do it is place a LAN Router between them instead of sticking a PC
between them.

There isn't anything else I could say without knowing all the details and
the reasons behind them.

--
Phillip Windell [MCP, MVP, CCNA]
www.wandtv.com
-----------------------------------------------------
Understanding the ISA 2004 Access Rule Processing
http://www.isaserver.org/articles/ISA2004_AccessRules.html

Microsoft Internet Security & Acceleration Server: Guidance
http://www.microsoft.com/isaserver/techinfo/Guidance/2004.asp
http://www.microsoft.com/isaserver/techinfo/Guidance/2000.asp

Microsoft Internet Security & Acceleration Server: Partners
http://www.microsoft.com/isaserver/partners/default.asp

 

[Dmitry Kopnichev]

I also have to connect another computer to one of the networks having only
one outlet for my computer and the other. How to make second outlet for the
other computer?

 

[Dmitry Kopnichev]

I need internet only from the additional network.

Hello
How to connect two RJ-45 cables from two LAN's to my Windows 2000 computer
for it to use resources of both LAN's? I have one installed Network Card and
a Network Switch - 3Com OfficeConnect Switch 8.

If they run the same set of addresses (without duplicates), which is very
common with small networks, then you only really have one LAN that is
physically separated into two physical wires. Just join the two physical
segments at one of the switches.

If they are different incompatible address ranges for each, then the "right"
way to do it is place a LAN Router between them instead of sticking a PC
between them.

There isn't anything else I could say without knowing all the details and
the reasons behind them.

--
Phillip Windell [MCP, MVP, CCNA]
www.wandtv.com
-----------------------------------------------------
Understanding the ISA 2004 Access Rule Processing
http://www.isaserver.org/articles/ISA2004_AccessRules.html

Microsoft Internet Security & Acceleration Server: Guidance
http://www.microsoft.com/isaserver/techinfo/Guidance/2004.asp
http://www.microsoft.com/isaserver/techinfo/Guidance/2000.asp

Microsoft Internet Security & Acceleration Server: Partners
http://www.microsoft.com/isaserver/partners/default.asp

 

[Phillip Windell]

If you go with two nics in the pc, then the "internet access" will follow
the default gateway. You can only have one functioning Default Gateway at a
time,...so it must be a gateway the takes you to the Internet and be
assigned on the proper interface.

--
Phillip Windell [MCP, MVP, CCNA]
www.wandtv.com
-----------------------------------------------------
Understanding the ISA 2004 Access Rule Processing
http://www.isaserver.org/articles/ISA2004_AccessRules.html

Microsoft Internet Security & Acceleration Server: Guidance
http://www.microsoft.com/isaserver/techinfo/Guidance/2004.asp
http://www.microsoft.com/isaserver/techinfo/Guidance/2000.asp

Microsoft Internet Security & Acceleration Server: Partners
http://www.microsoft.com/isaserver/partners/default.asp
-----------------------------------------------------

I need internet only from the additional network.

Hello
How to connect two RJ-45 cables from two LAN's to my Windows 2000 computer
for it to use resources of both LAN's? I have one installed Network

Card
and

a Network Switch - 3Com OfficeConnect Switch 8.

If they run the same set of addresses (without duplicates), which is very
common with small networks, then you only really have one LAN that is
physically separated into two physical wires. Just join the two physical
segments at one of the switches.

If they are different incompatible address ranges for each, then the "right"
way to do it is place a LAN Router between them instead of sticking a PC
between them.

There isn't anything else I could say without knowing all the details and
the reasons behind them.

--
Phillip Windell [MCP, MVP, CCNA]
www.wandtv.com
-----------------------------------------------------
Understanding the ISA 2004 Access Rule Processing
http://www.isaserver.org/articles/ISA2004_AccessRules.html

Microsoft Internet Security & Acceleration Server: Guidance
http://www.microsoft.com/isaserver/techinfo/Guidance/2004.asp
http://www.microsoft.com/isaserver/techinfo/Guidance/2000.asp

Microsoft Internet Security & Acceleration Server: Partners
http://www.microsoft.com/isaserver/partners/default.asp

 

[Dmitry Kopnichev]

Thanks for your reply Phillip.
How to make Default Gateway a gateway that takes me to the Internet and
assign it on the proper interface?

If you go with two nics in the pc, then the "internet access" will follow
the default gateway. You can only have one functioning Default Gateway at a
time,...so it must be a gateway the takes you to the Internet and be
assigned on the proper interface.

--
Phillip Windell [MCP, MVP, CCNA]
www.wandtv.com
-----------------------------------------------------
Understanding the ISA 2004 Access Rule Processing
http://www.isaserver.org/articles/ISA2004_AccessRules.html

Microsoft Internet Security & Acceleration Server: Guidance
http://www.microsoft.com/isaserver/techinfo/Guidance/2004.asp
http://www.microsoft.com/isaserver/techinfo/Guidance/2000.asp

Microsoft Internet Security & Acceleration Server: Partners
http://www.microsoft.com/isaserver/partners/default.asp
-----------------------------------------------------

I need internet only from the additional network.

Hello
How to connect two RJ-45 cables from two LAN's to my Windows 2000 computer
for it to use resources of both LAN's? I have one installed Network Card
and
a Network Switch - 3Com OfficeConnect Switch 8.

If they run the same set of addresses (without duplicates), which is very
common with small networks, then you only really have one LAN that is
physically separated into two physical wires. Just join the two physical
segments at one of the switches.

If they are different incompatible address ranges for each, then the "right"
way to do it is place a LAN Router between them instead of sticking a PC
between them.

There isn't anything else I could say without knowing all the details and
the reasons behind them.

--
Phillip Windell [MCP, MVP, CCNA]
www.wandtv.com
-----------------------------------------------------
Understanding the ISA 2004 Access Rule Processing
http://www.isaserver.org/articles/ISA2004_AccessRules.html

Microsoft Internet Security & Acceleration Server: Guidance
http://www.microsoft.com/isaserver/techinfo/Guidance/2004.asp
http://www.microsoft.com/isaserver/techinfo/Guidance/2000.asp

Microsoft Internet Security & Acceleration Server: Partners
http://www.microsoft.com/isaserver/partners/default.asp

 

[Phillip Windell]

Surely you know how to enter a Default Gateway into a nic's TCP/IP
properties.....

--
Phillip Windell [MCP, MVP, CCNA]
www.wandtv.com
-----------------------------------------------------
Understanding the ISA 2004 Access Rule Processing
http://www.isaserver.org/articles/ISA2004_AccessRules.html

Microsoft Internet Security & Acceleration Server: Guidance
http://www.microsoft.com/isaserver/techinfo/Guidance/2004.asp
http://www.microsoft.com/isaserver/techinfo/Guidance/2000.asp

Microsoft Internet Security & Acceleration Server: Partners
http://www.microsoft.com/isaserver/partners/default.asp
-----------------------------------------------------

Thanks for your reply Phillip.
How to make Default Gateway a gateway that takes me to the Internet and
assign it on the proper interface?

If you go with two nics in the pc, then the "internet access" will follow
the default gateway. You can only have one functioning Default Gateway

at

a
time,...so it must be a gateway the takes you to the Internet and be
assigned on the proper interface.

--
Phillip Windell [MCP, MVP, CCNA]
www.wandtv.com
-----------------------------------------------------
Understanding the ISA 2004 Access Rule Processing
http://www.isaserver.org/articles/ISA2004_AccessRules.html

Microsoft Internet Security & Acceleration Server: Guidance
http://www.microsoft.com/isaserver/techinfo/Guidance/2004.asp
http://www.microsoft.com/isaserver/techinfo/Guidance/2000.asp

Microsoft Internet Security & Acceleration Server: Partners
http://www.microsoft.com/isaserver/partners/default.asp
-----------------------------------------------------

I need internet only from the additional network.
"Phillip Windell" <@.> ÓÏÏÂÝÉÌ/ÓÏÏÂÝÉÌÁ × ÎÏ×ÏÓÔÑÈ ÓÌÅÄÕÀÝÅÅ:
Hello
How to connect two RJ-45 cables from two LAN's to my Windows 2000
computer
for it to use resources of both LAN's? I have one installed

Network
Card

and
a Network Switch - 3Com OfficeConnect Switch 8.

If they run the same set of addresses (without duplicates), which is very
common with small networks, then you only really have one LAN that is
physically separated into two physical wires. Just join the two physical
segments at one of the switches.

If they are different incompatible address ranges for each, then the
"right"
way to do it is place a LAN Router between them instead of sticking

a

PC

between them.

There isn't anything else I could say without knowing all the

details
and

the reasons behind them.

--
Phillip Windell [MCP, MVP, CCNA]
www.wandtv.com
-----------------------------------------------------
Understanding the ISA 2004 Access Rule Processing
http://www.isaserver.org/articles/ISA2004_AccessRules.html

Microsoft Internet Security & Acceleration Server: Guidance
http://www.microsoft.com/isaserver/techinfo/Guidance/2004.asp
http://www.microsoft.com/isaserver/techinfo/Guidance/2000.asp

Microsoft Internet Security & Acceleration Server: Partners
http://www.microsoft.com/isaserver/partners/default.asp

 

[Dmitry Kopnichev]

The Default Gateway in a nic's TCP/IP properties is grayed out because IP
address is got automatically in the TCP/IP properties as the networks
require.

Surely you know how to enter a Default Gateway into a nic's TCP/IP
properties.....

--
Phillip Windell [MCP, MVP, CCNA]
www.wandtv.com
-----------------------------------------------------
Understanding the ISA 2004 Access Rule Processing
http://www.isaserver.org/articles/ISA2004_AccessRules.html

Microsoft Internet Security & Acceleration Server: Guidance
http://www.microsoft.com/isaserver/techinfo/Guidance/2004.asp
http://www.microsoft.com/isaserver/techinfo/Guidance/2000.asp

Microsoft Internet Security & Acceleration Server: Partners
http://www.microsoft.com/isaserver/partners/default.asp
-----------------------------------------------------

Thanks for your reply Phillip.
How to make Default Gateway a gateway that takes me to the Internet and
assign it on the proper interface?

Gateway

at

a
time,...so it must be a gateway the takes you to the Internet and be
assigned on the proper interface.

--
Phillip Windell [MCP, MVP, CCNA]
www.wandtv.com
-----------------------------------------------------
Understanding the ISA 2004 Access Rule Processing
http://www.isaserver.org/articles/ISA2004_AccessRules.html

Microsoft Internet Security & Acceleration Server: Guidance
http://www.microsoft.com/isaserver/techinfo/Guidance/2004.asp
http://www.microsoft.com/isaserver/techinfo/Guidance/2000.asp

Microsoft Internet Security & Acceleration Server: Partners
http://www.microsoft.com/isaserver/partners/default.asp
-----------------------------------------------------



I need internet only from the additional network.
"Phillip Windell" <@.> ÓÏÏÂÝÉÌ/ÓÏÏÂÝÉÌÁ × ÎÏ×ÏÓÔÑÈ ÓÌÅÄÕÀÝÅÅ:
Hello
How to connect two RJ-45 cables from two LAN's to my Windows 2000
computer
for it to use resources of both LAN's? I have one installed Network
Card
and
a Network Switch - 3Com OfficeConnect Switch 8.

If they run the same set of addresses (without duplicates), which is
very
common with small networks, then you only really have one LAN that is
physically separated into two physical wires. Just join the two
physical
segments at one of the switches.

If they are different incompatible address ranges for each, then the
"right"
way to do it is place a LAN Router between them instead of

sticking

a

PC
between them.

There isn't anything else I could say without knowing all the details
and
the reasons behind them.

--
Phillip Windell [MCP, MVP, CCNA]
www.wandtv.com
-----------------------------------------------------
Understanding the ISA 2004 Access Rule Processing
http://www.isaserver.org/articles/ISA2004_AccessRules.html

Microsoft Internet Security & Acceleration Server: Guidance
http://www.microsoft.com/isaserver/techinfo/Guidance/2004.asp
http://www.microsoft.com/isaserver/techinfo/Guidance/2000.asp

Microsoft Internet Security & Acceleration Server: Partners
http://www.microsoft.com/isaserver/partners/default.asp

 

[Phillip Windell]

Then you either stop doing it automatically,...or add the Default Gateway to
the DHCP Scope so it gets that automatically same way as the rest of the
TCP/IP details.

--
Phillip Windell [MCP, MVP, CCNA]
www.wandtv.com
-----------------------------------------------------
Understanding the ISA 2004 Access Rule Processing
http://www.isaserver.org/articles/ISA2004_AccessRules.html

Microsoft Internet Security & Acceleration Server: Guidance
http://www.microsoft.com/isaserver/techinfo/Guidance/2004.asp
http://www.microsoft.com/isaserver/techinfo/Guidance/2000.asp

Microsoft Internet Security & Acceleration Server: Partners
http://www.microsoft.com/isaserver/partners/default.asp
-----------------------------------------------------

The Default Gateway in a nic's TCP/IP properties is grayed out because IP
address is got automatically in the TCP/IP properties as the networks
require.

Surely you know how to enter a Default Gateway into a nic's TCP/IP
properties.....

--
Phillip Windell [MCP, MVP, CCNA]
www.wandtv.com
-----------------------------------------------------
Understanding the ISA 2004 Access Rule Processing
http://www.isaserver.org/articles/ISA2004_AccessRules.html

Microsoft Internet Security & Acceleration Server: Guidance
http://www.microsoft.com/isaserver/techinfo/Guidance/2004.asp
http://www.microsoft.com/isaserver/techinfo/Guidance/2000.asp

Microsoft Internet Security & Acceleration Server: Partners
http://www.microsoft.com/isaserver/partners/default.asp
-----------------------------------------------------

Thanks for your reply Phillip.
How to make Default Gateway a gateway that takes me to the Internet and
assign it on the proper interface?
"Phillip Windell" <@.> ÓÏÏÂÝÉÌ/ÓÏÏÂÝÉÌÁ × ÎÏ×ÏÓÔÑÈ ÓÌÅÄÕÀÝÅÅ:
If you go with two nics in the pc, then the "internet access" will follow
the default gateway. You can only have one functioning Default

Gateway

at
a
time,...so it must be a gateway the takes you to the Internet and be
assigned on the proper interface.

--
Phillip Windell [MCP, MVP, CCNA]
www.wandtv.com
-----------------------------------------------------
Understanding the ISA 2004 Access Rule Processing
http://www.isaserver.org/articles/ISA2004_AccessRules.html

Microsoft Internet Security & Acceleration Server: Guidance
http://www.microsoft.com/isaserver/techinfo/Guidance/2004.asp
http://www.microsoft.com/isaserver/techinfo/Guidance/2000.asp

Microsoft Internet Security & Acceleration Server: Partners
http://www.microsoft.com/isaserver/partners/default.asp
-----------------------------------------------------



I need internet only from the additional network.
"Phillip Windell" <@.> ÓÏÏÂÝÉÌ/ÓÏÏÂÝÉÌÁ × ÎÏ×ÏÓÔÑÈ ÓÌÅÄÕÀÝÅÅ:
Hello
How to connect two RJ-45 cables from two LAN's to my Windows 2000
computer
for it to use resources of both LAN's? I have one installed Network
Card
and
a Network Switch - 3Com OfficeConnect Switch 8.

If they run the same set of addresses (without duplicates),

which

is

very
common with small networks, then you only really have one LAN

that
is

physically separated into two physical wires. Just join the two
physical
segments at one of the switches.

If they are different incompatible address ranges for each, then the
"right"
way to do it is place a LAN Router between them instead of

sticking

a
PC
between them.

There isn't anything else I could say without knowing all the details
and
the reasons behind them.

--
Phillip Windell [MCP, MVP, CCNA]
www.wandtv.com
-----------------------------------------------------
Understanding the ISA 2004 Access Rule Processing
http://www.isaserver.org/articles/ISA2004_AccessRules.html

Microsoft Internet Security & Acceleration Server: Guidance
http://www.microsoft.com/isaserver/techinfo/Guidance/2004.asp
http://www.microsoft.com/isaserver/techinfo/Guidance/2000.asp

Microsoft Internet Security & Acceleration Server: Partners
http://www.microsoft.com/isaserver/partners/default.asp

 

[Dmitry Kopnichev]

Do you mean a setting that DHCP is turned on IP settings tab in Advanced
TCP/IP properties windows by adding the Default Gateway to the DHCP Scope?
How to add the Default Gateway to the DHCP Scope?

Then you either stop doing it automatically,...or add the Default Gateway to
the DHCP Scope so it gets that automatically same way as the rest of the
TCP/IP details.

--
Phillip Windell [MCP, MVP, CCNA]
www.wandtv.com
-----------------------------------------------------
Understanding the ISA 2004 Access Rule Processing
http://www.isaserver.org/articles/ISA2004_AccessRules.html

Microsoft Internet Security & Acceleration Server: Guidance
http://www.microsoft.com/isaserver/techinfo/Guidance/2004.asp
http://www.microsoft.com/isaserver/techinfo/Guidance/2000.asp

Microsoft Internet Security & Acceleration Server: Partners
http://www.microsoft.com/isaserver/partners/default.asp
-----------------------------------------------------

The Default Gateway in a nic's TCP/IP properties is grayed out because IP
address is got automatically in the TCP/IP properties as the networks
require.

Surely you know how to enter a Default Gateway into a nic's TCP/IP
properties.....

--
Phillip Windell [MCP, MVP, CCNA]
www.wandtv.com
-----------------------------------------------------
Understanding the ISA 2004 Access Rule Processing
http://www.isaserver.org/articles/ISA2004_AccessRules.html

Microsoft Internet Security & Acceleration Server: Guidance
http://www.microsoft.com/isaserver/techinfo/Guidance/2004.asp
http://www.microsoft.com/isaserver/techinfo/Guidance/2000.asp

Microsoft Internet Security & Acceleration Server: Partners
http://www.microsoft.com/isaserver/partners/default.asp
-----------------------------------------------------


Thanks for your reply Phillip.
How to make Default Gateway a gateway that takes me to the Internet and
assign it on the proper interface?
"Phillip Windell" <@.> ÓÏÏÂÝÉÌ/ÓÏÏÂÝÉÌÁ × ÎÏ×ÏÓÔÑÈ ÓÌÅÄÕÀÝÅÅ:
If you go with two nics in the pc, then the "internet access" will
follow
the default gateway. You can only have one functioning Default Gateway
at
a
time,...so it must be a gateway the takes you to the Internet and be
assigned on the proper interface.

--
Phillip Windell [MCP, MVP, CCNA]
www.wandtv.com
-----------------------------------------------------
Understanding the ISA 2004 Access Rule Processing
http://www.isaserver.org/articles/ISA2004_AccessRules.html

Microsoft Internet Security & Acceleration Server: Guidance
http://www.microsoft.com/isaserver/techinfo/Guidance/2004.asp
http://www.microsoft.com/isaserver/techinfo/Guidance/2000.asp

Microsoft Internet Security & Acceleration Server: Partners
http://www.microsoft.com/isaserver/partners/default.asp
-----------------------------------------------------



I need internet only from the additional network.
"Phillip Windell" <@.> ÓÏÏÂÝÉÌ/ÓÏÏÂÝÉÌÁ × ÎÏ×ÏÓÔÑÈ ÓÌÅÄÕÀÝÅÅ:
Hello
How to connect two RJ-45 cables from two LAN's to my Windows 2000
computer
for it to use resources of both LAN's? I have one installed
Network
Card
and
a Network Switch - 3Com OfficeConnect Switch 8.

If they run the same set of addresses (without duplicates),

which

is
very
common with small networks, then you only really have one LAN that
is
physically separated into two physical wires. Just join the two
physical
segments at one of the switches.

If they are different incompatible address ranges for each,

then
the

"right"
way to do it is place a LAN Router between them instead of sticking
a
PC
between them.

There isn't anything else I could say without knowing all the
details
and
the reasons behind them.

--
Phillip Windell [MCP, MVP, CCNA]
www.wandtv.com
-----------------------------------------------------
Understanding the ISA 2004 Access Rule Processing
http://www.isaserver.org/articles/ISA2004_AccessRules.html

Microsoft Internet Security & Acceleration Server: Guidance
http://www.microsoft.com/isaserver/techinfo/Guidance/2004.asp
http://www.microsoft.com/isaserver/techinfo/Guidance/2000.asp

Microsoft Internet Security & Acceleration Server: Partners
http://www.microsoft.com/isaserver/partners/default.asp

 

[Dmitry Kopnichev]

Thanks Phillip.
Why does ipconfig /all show that both NICs have their own different default
gateway now then? I have access to both LA networks now and to Internet.

If you go with two nics in the pc, then the "internet access" will follow
the default gateway. You can only have one functioning Default Gateway at a
time,...so it must be a gateway the takes you to the Internet and be
assigned on the proper interface.

--
Phillip Windell [MCP, MVP, CCNA]
www.wandtv.com
-----------------------------------------------------
Understanding the ISA 2004 Access Rule Processing
http://www.isaserver.org/articles/ISA2004_AccessRules.html

Microsoft Internet Security & Acceleration Server: Guidance
http://www.microsoft.com/isaserver/techinfo/Guidance/2004.asp
http://www.microsoft.com/isaserver/techinfo/Guidance/2000.asp

Microsoft Internet Security & Acceleration Server: Partners
http://www.microsoft.com/isaserver/partners/default.asp
-----------------------------------------------------

I need internet only from the additional network.

Hello
How to connect two RJ-45 cables from two LAN's to my Windows 2000 computer
for it to use resources of both LAN's? I have one installed Network Card
and
a Network Switch - 3Com OfficeConnect Switch 8.

If they run the same set of addresses (without duplicates), which is very
common with small networks, then you only really have one LAN that is
physically separated into two physical wires. Just join the two physical
segments at one of the switches.

If they are different incompatible address ranges for each, then the "right"
way to do it is place a LAN Router between them instead of sticking a PC
between them.

There isn't anything else I could say without knowing all the details and
the reasons behind them.

--
Phillip Windell [MCP, MVP, CCNA]
www.wandtv.com
-----------------------------------------------------
Understanding the ISA 2004 Access Rule Processing
http://www.isaserver.org/articles/ISA2004_AccessRules.html

Microsoft Internet Security & Acceleration Server: Guidance
http://www.microsoft.com/isaserver/techinfo/Guidance/2004.asp
http://www.microsoft.com/isaserver/techinfo/Guidance/2000.asp

Microsoft Internet Security & Acceleration Server: Partners
http://www.microsoft.com/isaserver/partners/default.asp

 

[Phillip Windell]

Do you mean a setting that DHCP is turned on IP settings tab in Advanced
TCP/IP properties windows by adding the Default Gateway to the DHCP Scope?
How to add the Default Gateway to the DHCP Scope?

It is a Scope Option called "003 Router". It is the "Default Gateway".

--
Phillip Windell [MCP, MVP, CCNA]
www.wandtv.com
-----------------------------------------------------
Understanding the ISA 2004 Access Rule Processing
http://www.isaserver.org/articles/ISA2004_AccessRules.html

Microsoft Internet Security & Acceleration Server: Guidance
http://www.microsoft.com/isaserver/techinfo/Guidance/2004.asp
http://www.microsoft.com/isaserver/techinfo/Guidance/2000.asp

Microsoft Internet Security & Acceleration Server: Partners
http://www.microsoft.com/isaserver/partners/default.asp
-----------------------------------------------------

 

[Phillip Windell]

Why does ipconfig /all show that both NICs have their own different default
gateway now then?

Well it shows they both have default gateways,...because,...they both have
default gateways. There isn't anything that stops you from adding one to
every Nic,...you just aren't supposed to do it.

--
Phillip Windell [MCP, MVP, CCNA]
www.wandtv.com
-----------------------------------------------------
Understanding the ISA 2004 Access Rule Processing
http://www.isaserver.org/articles/ISA2004_AccessRules.html

Microsoft Internet Security & Acceleration Server: Guidance
http://www.microsoft.com/isaserver/techinfo/Guidance/2004.asp
http://www.microsoft.com/isaserver/techinfo/Guidance/2000.asp

Microsoft Internet Security & Acceleration Server: Partners
http://www.microsoft.com/isaserver/partners/default.asp
-----------------------------------------------------



I have access to both LA networks now and to Internet.

If you go with two nics in the pc, then the "internet access" will follow
the default gateway. You can only have one functioning Default Gateway

at

a
time,...so it must be a gateway the takes you to the Internet and be
assigned on the proper interface.

--
Phillip Windell [MCP, MVP, CCNA]
www.wandtv.com
-----------------------------------------------------
Understanding the ISA 2004 Access Rule Processing
http://www.isaserver.org/articles/ISA2004_AccessRules.html

Microsoft Internet Security & Acceleration Server: Guidance
http://www.microsoft.com/isaserver/techinfo/Guidance/2004.asp
http://www.microsoft.com/isaserver/techinfo/Guidance/2000.asp

Microsoft Internet Security & Acceleration Server: Partners
http://www.microsoft.com/isaserver/partners/default.asp
-----------------------------------------------------

I need internet only from the additional network.
"Phillip Windell" <@.> ÓÏÏÂÝÉÌ/ÓÏÏÂÝÉÌÁ × ÎÏ×ÏÓÔÑÈ ÓÌÅÄÕÀÝÅÅ:
Hello
How to connect two RJ-45 cables from two LAN's to my Windows 2000
computer
for it to use resources of both LAN's? I have one installed

Network
Card

and
a Network Switch - 3Com OfficeConnect Switch 8.

If they run the same set of addresses (without duplicates), which is very
common with small networks, then you only really have one LAN that is
physically separated into two physical wires. Just join the two physical
segments at one of the switches.

If they are different incompatible address ranges for each, then the
"right"
way to do it is place a LAN Router between them instead of sticking

a

PC

between them.

There isn't anything else I could say without knowing all the

details
and

the reasons behind them.

--
Phillip Windell [MCP, MVP, CCNA]
www.wandtv.com
-----------------------------------------------------
Understanding the ISA 2004 Access Rule Processing
http://www.isaserver.org/articles/ISA2004_AccessRules.html

Microsoft Internet Security & Acceleration Server: Guidance
http://www.microsoft.com/isaserver/techinfo/Guidance/2004.asp
http://www.microsoft.com/isaserver/techinfo/Guidance/2000.asp

Microsoft Internet Security & Acceleration Server: Partners
http://www.microsoft.com/isaserver/partners/default.asp

 

[Dmitry Kopnichev]

Where is the Scope Option called "003 Router", the "Default Gateway"?

Do you mean a setting that DHCP is turned on IP settings tab in Advanced
TCP/IP properties windows by adding the Default Gateway to the DHCP Scope?
How to add the Default Gateway to the DHCP Scope?

It is a Scope Option called "003 Router". It is the "Default Gateway".

--
Phillip Windell [MCP, MVP, CCNA]
www.wandtv.com
-----------------------------------------------------
Understanding the ISA 2004 Access Rule Processing
http://www.isaserver.org/articles/ISA2004_AccessRules.html

Microsoft Internet Security & Acceleration Server: Guidance
http://www.microsoft.com/isaserver/techinfo/Guidance/2004.asp
http://www.microsoft.com/isaserver/techinfo/Guidance/2000.asp

Microsoft Internet Security & Acceleration Server: Partners
http://www.microsoft.com/isaserver/partners/default.asp

 

[Dmitry Kopnichev]

I did not add a default gateway to a NIC by myself. Why am I not supposed to
have two default gateways?

Why does ipconfig /all show that both NICs have their own different default
gateway now then?

Well it shows they both have default gateways,...because,...they both have
default gateways. There isn't anything that stops you from adding one to
every Nic,...you just aren't supposed to do it.

--
Phillip Windell [MCP, MVP, CCNA]
www.wandtv.com
-----------------------------------------------------
Understanding the ISA 2004 Access Rule Processing
http://www.isaserver.org/articles/ISA2004_AccessRules.html

Microsoft Internet Security & Acceleration Server: Guidance
http://www.microsoft.com/isaserver/techinfo/Guidance/2004.asp
http://www.microsoft.com/isaserver/techinfo/Guidance/2000.asp

Microsoft Internet Security & Acceleration Server: Partners
http://www.microsoft.com/isaserver/partners/default.asp
-----------------------------------------------------



I have access to both LA networks now and to Internet. Gateway

at

a
time,...so it must be a gateway the takes you to the Internet and be
assigned on the proper interface.

--
Phillip Windell [MCP, MVP, CCNA]
www.wandtv.com
-----------------------------------------------------
Understanding the ISA 2004 Access Rule Processing
http://www.isaserver.org/articles/ISA2004_AccessRules.html

Microsoft Internet Security & Acceleration Server: Guidance
http://www.microsoft.com/isaserver/techinfo/Guidance/2004.asp
http://www.microsoft.com/isaserver/techinfo/Guidance/2000.asp

Microsoft Internet Security & Acceleration Server: Partners
http://www.microsoft.com/isaserver/partners/default.asp
-----------------------------------------------------



I need internet only from the additional network.
"Phillip Windell" <@.> ÓÏÏÂÝÉÌ/ÓÏÏÂÝÉÌÁ × ÎÏ×ÏÓÔÑÈ ÓÌÅÄÕÀÝÅÅ:
Hello
How to connect two RJ-45 cables from two LAN's to my Windows 2000
computer
for it to use resources of both LAN's? I have one installed Network
Card
and
a Network Switch - 3Com OfficeConnect Switch 8.

If they run the same set of addresses (without duplicates), which is
very
common with small networks, then you only really have one LAN that is
physically separated into two physical wires. Just join the two
physical
segments at one of the switches.

If they are different incompatible address ranges for each, then the
"right"
way to do it is place a LAN Router between them instead of

sticking

a

PC
between them.

There isn't anything else I could say without knowing all the details
and
the reasons behind them.

--
Phillip Windell [MCP, MVP, CCNA]
www.wandtv.com
-----------------------------------------------------
Understanding the ISA 2004 Access Rule Processing
http://www.isaserver.org/articles/ISA2004_AccessRules.html

Microsoft Internet Security & Acceleration Server: Guidance
http://www.microsoft.com/isaserver/techinfo/Guidance/2004.asp
http://www.microsoft.com/isaserver/techinfo/Guidance/2000.asp

Microsoft Internet Security & Acceleration Server: Partners
http://www.microsoft.com/isaserver/partners/default.asp

 

[Phillip Windell]

I'm sure you can figure that out. I'm not going to lead you by the hand
every mouse click of the way. This thread has dragged out long enough.