Handy Guide - Max CPU Temp For Crunchers

Adywebb said:
Yep, thats well cool - no problems there mate!:thumb:

*only joking about the snooze

:)

:thumb: Back to crunching! I was 2nd from bottom for like 2 days and that was when someone joined and even he has over taken me LOL
 
stuartw101 said:
:thumb: Back to crunching! I was 2nd from bottom for like 2 days and that was when someone joined and even he has over taken me LOL
I apologise if you've told me before - but what are your PC specs (CPU/RAM/HD)?
 
stuartw101 said:
I have AMD Athlon 64 3200 2.01GHZ, 1024MB RAM, and i set the HD to 10GB.
So have I ... something not quite right here.

:confused:
 
muckshifter said:
So have I ... something not quite right here.

:confused:

Well i dont have it on 24/7 :o That could be the reason LOL

I know its not much of a contribution but its a contribution.

Oh my CPU temp is now at 47/48, the highest i have seen it. You sure that is fine? Also is teh aux temp the case temp? Also could you give me a range of temps for each that they should be ideally?
 
In my case the cpu temp when the computer is idle is 10 Deg higher than what the room temp is, in case of high cpu activity add 15-20 on top of that. If I calculate backwards your room temp should be about 17-22 Deg C. Is that so? If it is you need not worry about anything.
 
stuartw101 said:
I normally have the pc on from anywhere between 6-12hrs.

Not sure what the room temp is.
A set up like yours is likely to earn something like 35 points per hour (6hrs = 210 points)as long as no other processes are being run as well, ie at idle - if you are using it as well during this time then the output will be less :thumb:
 
CPU Temp

I monitor the temp of cpu/motherboard by using the asus probe for my a8n-e motherboard and also use everest home ed as well. is their a more reliable software to use? Temps all ok, so no panic, just interested thats all. Cheers feckit.
 
Quadophile said:
Here is a link for software that may come in handy ;)

http://www.stvsoft.com/index.php?page=2
If anybody is using this ... there has been an update, well I think there has. :)

I just installed it and it has some nice features to it.
nod.gif
 
Brilliant Quad & Mucks :wave:

System running like this

CPU 37 degrees C
SYS 43 "
AUX 33 "
HDO 39 "
 
I just altered the CPU & SYS around as it was backwards ... I think yours is the same Rush ... easy enough to "fix" just swap the sensors over.

mine runing Boinc full pelt ...

CPU = 36
SYS = 28
AUX = 28
HD = 23


:thumb:
 
Cheers Mucks ...

Now corrected at ...

CPU 43 degrees C
SYS 37"
AUX 33 "
HDO 39 "

:thumb:
 
Just thought i would say how impressed i was with these temps. I left the pc on overnight for 11 1/2 hours, i closed all the processes i didnt need. So it was in idle all that time, you would probaly expect that as the computer isn't being used but i was suprised, probaly as i have never left it on overnight before lol.

Are the temps ok? Also you were saying something about swapping sensors around?
 

Attachments

  • temp.webp
    temp.webp
    14.5 KB · Views: 235
stuartw101 said:
Just thought i would say how impressed i was with these temps. I left the pc on overnight for 11 1/2 hours, i closed all the processes i didnt need. So it was in idle all that time, you would probaly expect that as the computer isn't being used but i was suprised, probaly as i have never left it on overnight before lol.

Are the temps ok? Also you were saying something about swapping sensors around?
You have no need to swap your sensors, they are correct ... there is also no need to shutdown any "processes" as they won't be use if you are not using the PC.

;)


oh, temp is fine. :D
 
muckshifter said:
You have no need to swap your sensors, they are correct ... there is also no need to shutdown any "processes" as they won't be use if you are not using the PC.

;)

oh, temp is fine. :D

Good stuff,

Thanks
 
Back
Top