Zalman CNPS7000A-CU on a P4C800

  • Thread starter Thread starter Fredrik
  • Start date Start date
F

Fredrik

Will a CNPS7000A-CU heatsink fit on an Asus P4C800? Isn't the
passive heatsink for the chipset in the way?

Thanks
Fredrik
 
Will a CNPS7000A-CU heatsink fit on an Asus P4C800?

I've got one in my system - a P4C800-E Deluxe. I don't know if the board
layouts are different.

Check this out for incompatibilities: -

http://www.zalman.co.kr/english/product/cnps7000a-478_motherboard_list.html
Isn't the passive heatsink for the chipset in the way?
Click to expand...

You can check out the dimensions required here: -

http://www.zalman.co.kr/english/product/cnps7000a-cu.htm

If you have a small case, the power supply can be too low to fit the Zalman.

Anyway, a great product. I have the ZM80C-HP on my 9800 Pro, which I can
also highly recommend.
 
Will a CNPS7000A-CU heatsink fit on an Asus P4C800? Isn't the
passive heatsink for the chipset in the way?
Click to expand...

I have the P4P800, which has the same layout IIRC, and the Zalman 7000
fits fine.
 
I have the P4P800, which has the same layout IIRC, and the Zalman 7000
fits fine.
Click to expand...

Does the P4P800 also have the same chipset heatsink as the P4C800? It
seems to be very high.
 
I have the P4C800-E Deluxe motherboard and the zalman CNPS7000A-ALCU heat
sink fits just fine misses the chip set heat sink . It works great, a little
tricky to install (keep the cross members centered) and use artic silver 5.
Good luck.
R. B.
 
Back
Top