Your Opinions Needed

  • Thread starter Thread starter Pat in Atlanta
  • Start date Start date
P

Pat in Atlanta

I'm a senior citizen and paid a technician to install a new computer setup
for me. The display isn't as clear as it should be but he said yes, it's
fine. I asked him to change back to my old monitor which had been great but
now this, too, was fuzzy. He said it looked fine to him. He tells me I
should try to exchange the new monitor for another one if I can't live with
it but I figure that won't be right, either, that there's something wrong
with the computer since neither the new nor the old one looks right. What
do you think?
 
Pat in Atlanta said:
I'm a senior citizen and paid a technician to install a new computer
setup for me. The display isn't as clear as it should be but he said
yes, it's fine.
Click to expand...

Is it a flat LCD display instead of a traditional, large and heavy CRT
display? If yes, then it might be possible that the computer has not been
correctly set up to send the image at the native resolution of the LCD
panel.
 
It is not clear from what you write whether the new set up you mention
includes changng the monitor to a new one.

Please clarify the following:

What type of monitor do you now have? Is it a very thin one or is it a
heavy CRT based one?

Did you chenge monitors or not?
 
Pat in Atlanta said:
I'm a senior citizen and paid a technician to install a new computer setup
for me. The display isn't as clear as it should be but he said yes, it's
fine. I asked him to change back to my old monitor which had been great
but now this, too, was fuzzy. He said it looked fine to him. He tells me
I should try to exchange the new monitor for another one if I can't live
with it but I figure that won't be right, either, that there's something
wrong with the computer since neither the new nor the old one looks right.
What do you think?
Click to expand...
If the new monitor is a flat LCD type, ask your technician to enable
Cleartype and to install and use the Cleartype tuning utility.
 
milsabords said:
If the new monitor is a flat LCD type, ask your technician to enable
Cleartype and to install and use the Cleartype tuning utility.
Click to expand...

In addition to the good advice offered by milsabords, have him to check that
the video card is set to the native resolution of the LCD monitor.

Bobby
 
I'm a senior citizen and paid a technician to install a new computer setup
for me. The display isn't as clear as it should be but he said yes, it's
fine. I asked him to change back to my old monitor which had been great but
now this, too, was fuzzy. He said it looked fine to him. He tells me I
should try to exchange the new monitor for another one if I can't live with
it but I figure that won't be right, either, that there's something wrong
with the computer since neither the new nor the old one looks right. What
do you think?
Click to expand...

If you continue to have a problem, drop me a line, I post using my real
e-mail address. I do PC repair work in the Atlanta area, and I'd be more
than happy to swing by and take a look at your problem the next time I'm
in your area.

Brian K
 
Pat said:
I'm a senior citizen and paid a technician to install a new computer setup
for me. The display isn't as clear as it should be but he said yes, it's
fine. I asked him to change back to my old monitor which had been great but
now this, too, was fuzzy. He said it looked fine to him. He tells me I
should try to exchange the new monitor for another one if I can't live with
it but I figure that won't be right, either, that there's something wrong
with the computer since neither the new nor the old one looks right. What
do you think?
Click to expand...

I had a boss once that needed LOWER resolution because that's what
looked best to him. It might look right to the tech and not you.

then again, he may not be all that great a tech.

ARE YOUR DESKTOP ICONS THE SAME SIZE THEY USED TO BE?

if icons are the same size, bets are the resolution has not changed.
if the icons are smaller, you now have a higher resolution setting,
which should be clearer to young eyes, but might be harder to see to
veteran orbs.

if you can start up the old system you can verify numbers between the
graphics card / monitor setup. otherwise you kind of need to know what
you used to have for comparison. so he can know where you WANT to end up.

plugging the old monitor into a new system will fix nothing if the
resolution the card is putting out is not what looks good to you. even
if they are compatable. it's the combination of the two.

hope that helps.
 
plugging the old monitor into a new system will fix nothing if the
resolution the card is putting out is not what looks good to you. even
if they are compatable. it's the combination of the two.
Click to expand...

Also, the screen refresh rate is important: some people can tell the
difference between 60hz and 85 hz, some can't....slow refresh rates
drive me nuts, can't look at it...other people don't even notice. I
think faster is better.

Lots of different adjustments the tech could have tried....contrast,
brightness, cleartype, etc...

HTH
 
Back
Top