Yellow ! next to ATI WDM Rage Theater Video

  • Thread starter Thread starter Aloke Prasad
  • Start date Start date
A

Aloke Prasad

On a AIW 9800 Pro 128 M and Intel 874PBZ board, WinXPPro SP1, I have the
dreaded yellow ! next to this entry in the device manager. Why? How do I
fix this?

I have only the monitor attached to the card. The video in or out are not
attached. Could this be the reason?

Thanks.
 
Aloke Prasad said:
On a AIW 9800 Pro 128 M and Intel 874PBZ board, WinXPPro SP1, I have the
dreaded yellow ! next to this entry in the device manager. Why? How do I
fix this?

I have only the monitor attached to the card. The video in or out are not
attached. Could this be the reason?

Thanks.
Click to expand...

Aloke,

If you had the most current DX9 drivers installed then installed the AIW
drivers from the CD ATI provides it might be that you have an older version
installed over the newer DX9....Just reinstall DX9 latest version from MS
and see if that fix's it.... YMMV

Tim
 
If you had the most current DX9 drivers installed then installed the AIW
drivers from the CD ATI provides it might be that you have an older version
installed over the newer DX9....Just reinstall DX9 latest version from MS
and see if that fix's it.... YMMV
Click to expand...

It seems to be fixed (for now) by installing the driver

http://www2.ati.com/drivers/tv-capture-wdm-6-14-10-6217v1.exe

I wonder why it got messed up. I had used the Catalyst complete set

http://www2.ati.com/drivers/wxp-w2k-catalyst-7-93-030812a1-010735c-efg.exe

to set all this up just yesterday...
 
Back
Top