XP Timing Out Network Connections

  • Thread starter Thread starter CasaGuapo
  • Start date Start date
C

CasaGuapo

I just got a new computer running XP Professional, while
everone else in the office in running 2000, including our
server. It seems like XP is timing out the network
connections. It will connect to the server once you
start it up, but it won't connect after it's been running
for a while.

Is there a setting we need to change? Passwords
shouldn't be a problem.
 
quoted form http://www.ChicagoTech.net
Why some mapped network drives show a red x

SYMPTOMS: You find that the network drive mapping may be disconnected after
15 minutes of inactivity and Windows Explorer may display a red "X" on the
icon of the mapped drive. However, if you double-click it reconnects
quickly.

RESOLUTION: by default, idle connections will be dropped after 15 minutes.
To modify idle time, at a command prompt using net config server
/autodisconnect: minutes. For example, to set the Autodisconnect value to
30 minutes, you would run the following command line: net config server
/autodisconnect:30. If you would like to turn Autodisconnect off, do net
config server /autodisconnect:-1.
--
For more and other information, go to http://www.ChicagoTech.net


Don't send e-mail or reply to me except you need consulting services.
Posting on MS newsgroup will benefit all readers and you may get more help.

Robert Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN, Anti-Virus, Tips & Troubleshooting on
http://www.ChicagoTech.net
This posting is provided "AS IS" with no warranties.
 
I'll give it a try.

-----Original Message-----
quoted form http://www.ChicagoTech.net
Why some mapped network drives show a red x

SYMPTOMS: You find that the network drive mapping may be disconnected after
15 minutes of inactivity and Windows Explorer may display a red "X" on the
icon of the mapped drive. However, if you double-click it reconnects
quickly.

RESOLUTION: by default, idle connections will be dropped after 15 minutes.
To modify idle time, at a command prompt using net config server
/autodisconnect: minutes. For example, to set the Autodisconnect value to
30 minutes, you would run the following command line: net config server
/autodisconnect:30. If you would like to turn Autodisconnect off, do net
config server /autodisconnect:-1.
--
For more and other information, go to http://www.ChicagoTech.net


Don't send e-mail or reply to me except you need consulting services.
Posting on MS newsgroup will benefit all readers and you may get more help.

Robert Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN, Anti-Virus, Tips & Troubleshooting on
http://www.ChicagoTech.net
This posting is provided "AS IS" with no warranties.




.
Click to expand...
 
I am having the same problem with some of my users,
mainly laptop users. What happens is that if leave their
computer for awhile and come back they are "unable to
connect to network drive..". I know the default time-out
for network connections is 15 mins (red X) but that
should automatically reconnect when you try to access it
again.
Not sure what is wrong. Anyone got ideas?
 
in this case, you may want to check power management.

--
For more and other information, go to http://www.ChicagoTech.net

Don't send e-mail or reply to me except you need consulting services.
Posting on MS newsgroup will benefit all readers and you may get more help.

Robert Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN, Anti-Virus, Tips & Troubleshooting on
http://www.ChicagoTech.net
This posting is provided "AS IS" with no warranties.
 
Back
Top