xp prob. after new motherboard.

  • Thread starter Thread starter Loretta
  • Start date Start date
L

Loretta

I had to put in a new motherboard and power supply. Now XP keeps rebooting.
I am going to try a repair. Does any one know an easier way to get xp to
cooperate with a new mother board. A full reinstall is not an option.
Loretta
 
Changing a Motherboard or Moving a Hard Drive with XP Installed
http://www.michaelstevenstech.com/moving_xp.html

How to Perform a Windows XP Repair Install
http://www.michaelstevenstech.com/XPrepairinstall.htm

[Courtesy of MS-MVP Michael Stevens]

--
Carey Frisch
Microsoft MVP
Windows - Shell/User
Microsoft Community Newsgroups
news://msnews.microsoft.com/

-------------------------------------------------------------------------------------------

:

| I had to put in a new motherboard and power supply. Now XP keeps rebooting.
| I am going to try a repair. Does any one know an easier way to get xp to
| cooperate with a new mother board. A full reinstall is not an option.
| Loretta
 
Installing a new board is ok,however thiers simply no way youre old drive
will run on it with xp untill you reinstall xp.A repair is wasting youre
time,
thier is no repair to the old installation cause it demands a clean
install.Once
xp has a clean installation to the new board,youre set to go....
 
You will need to run a Repair Install as Carey mentioned however are you
certain you have everything connected properly. Reboots can be hardware
related.
 
Loretta said:
I had to put in a new motherboard and power supply. Now XP keeps rebooting.
I am going to try a repair. Does any one know an easier way to get xp to
cooperate with a new mother board. A full reinstall is not an option.
Loretta


Normally, and assuming a retail license (many OEM installations are
BIOS-locked to a specific chipset and therefore not transferable to a
new motherboard - check yours before starting), unless the new
motherboard is virtually identical (same chipset, same IDE controllers,
same BIOS version, etc.) to the one on which the WinXP installation was
originally performed, you'll need to perform a repair (a.k.a. in-place
upgrade) installation, at the very least:

How to Perform an In-Place Upgrade of Windows XP
http://support.microsoft.com/directory/article.asp?ID=KB;EN-US;Q315341

The "why" is quite simple, really, and has nothing to do with
licensing issues, per se; it's a purely technical matter, at this point.
You've pulled the proverbial hardware rug out from under the OS. (If
you don't like -- or get -- the rug analogy, think of it as picking up a
Cape Cod style home and then setting it down onto a Ranch style
foundation. It just isn't going to fit.) WinXP, like Win2K before it,
is not nearly as "promiscuous" as Win9x when it comes to accepting any
old hardware configuration you throw at it. On installation it
"tailors" itself to the specific hardware found. This is one of the
reasons that the entire WinNT/2K/XP OS family is so much more stable
than the Win9x group.

As always when undertaking such a significant change, back up any
important data before starting.

This will also probably require re-activation, unless you have a
Volume Licensed version of WinXP Pro installed. If it's been more than
120 days since you last activated that specific Product Key, you'll most
likely be able to activate via the Internet without problem. If it's
been less, you might have to make a 5 minute phone call.


--

Bruce Chambers

Help us help you:



You can have peace. Or you can have freedom. Don't ever count on having
both at once. - RAH
 
Andrew said:
...... .A repair is wasting youre
time,
thier is no repair to the old installation


Ignoring the deplorable grammar and spelling, the above is an outright lie.


cause it demands a clean
install.


Yet another lie.


--

Bruce Chambers

Help us help you:



You can have peace. Or you can have freedom. Don't ever count on having
both at once. - RAH
 
In
Loretta said:
I had to put in a new motherboard and power supply. Now XP
keeps
rebooting. I am going to try a repair. Does any one know an
easier
way to get xp to cooperate with a new mother board.


That's the correct thing to try. There is no easier alternative.

A full reinstall
is not an option.


Be prepared for the worst. Although you may not consider it an
option, it's possible that you may have to do it anyway. Repair
installations often do the trick, but not always. If the repair
doesn't work, a full clean installation will be the only choice.
 
In
Andrew E. said:
Installing a new board is ok,however thiers simply no way youre old
drive will run on it with xp untill you reinstall xp.A repair is
wasting youre time,
thier is no repair to the old installation cause it demands a clean
install.Once
xp has a clean installation to the new board,youre set to go....

Wrong, wrong, wrong.
Repair Install
http://www.michaelstevenstech.com/XPrepairinstall.htm
--
Michael Stevens MS-MVP XP
(e-mail address removed)
http://www.michaelstevenstech.com
For a better newsgroup experience. Setup a newsreader.
http://www.michaelstevenstech.com/outlookexpressnewreader.htm
 
Back
Top