XP ICS and DSL

  • Thread starter Thread starter Mike
  • Start date Start date
M

Mike

Hello, and thanks in advance to anyone who can help me out.

I've just (re)set up a network with a 98, an Me and an XP
box. The XP box has two NICs, one to the Internet and one
to our Linksys router. I am trying to enable ICS on the
Internet Connection for all computers on my LAN. However,
I can't get things to work at once, i.e. if I disable the
Internet and enable the LAN, the LAN works beautifully; if
I enable the Internet and disable the LAN, the Internet
Connecion works beautifully. When both are enabled
simultaneously XP just sits there like I'm stupid.

What is going on? Am I getting IP conflicts that are
hosing the whole operation? I know XP sets the LAN card
to a static 192.168.0.1 when ICS is installed; and the
router's default IP is 192.168.1.1. Is this the problem?

As I said, thanks to anyone in advance for their time and
help.
 
"Mike" said:
Hello, and thanks in advance to anyone who can help me out.

I've just (re)set up a network with a 98, an Me and an XP
box. The XP box has two NICs, one to the Internet and one
to our Linksys router. I am trying to enable ICS on the
Internet Connection for all computers on my LAN. However,
I can't get things to work at once, i.e. if I disable the
Internet and enable the LAN, the LAN works beautifully; if
I enable the Internet and disable the LAN, the Internet
Connecion works beautifully. When both are enabled
simultaneously XP just sits there like I'm stupid.

What is going on? Am I getting IP conflicts that are
hosing the whole operation? I know XP sets the LAN card
to a static 192.168.0.1 when ICS is installed; and the
router's default IP is 192.168.1.1. Is this the problem?

As I said, thanks to anyone in advance for their time and
help.
Click to expand...

Your proposed setup should work using the usual subnet mask of
255.255.255.0. It wouldn't work with a subnet mask of 255.255.0.0 or
255.0.0.0, because the XP computer's two NICs would be in the same
subnet.

Why are you using ICS at all? Your Linksys router has a built-in
Internet sharing capability, so you can connect all three of the
computers to the router's LAN ports and forget ICS.
--
Best Wishes,
Steve Winograd, MS-MVP (Windows Networking)

Please post any reply as a follow-up message in the news group
for everyone to see. I'm sorry, but I don't answer questions
addressed directly to me in E-mail or news groups.

Microsoft Most Valuable Professional Program
http://mvp.support.microsoft.com
 
Back
Top