XP DHCP/DNS IP resolution

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I have set up my network to work through a 4-port D-Link G604T modem/router
using a local domain of 192.168.10 prefix. The DNS and DHCP resolutions
being handled by the G604T at 192.168.10.1.
All dynamic IP allocations work fine when equipment is attached. I can surf
the net and send/receive mail. But, If I try and "ping" the host “wkstn1†I
get an error. It can identify the host name (with domain name extension)_
and the assigned address. But if I try and "ping" either the host name or
the assigned IP address - it times out;-
Pinging wkstn1.<mydomain> [192.168.10.10] with 32 bytes of data:

Request timed out.
Request timed out.
Request timed out.
Request timed out.

Ping statistics for 192.168.10.10:
Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), >
Click to expand...
If I try “pathping said:
Tracing route to <mydomain> [<mydomain IP>]
over a maximum of 30 hops:
0 wkstn1.<mydomain> [192.168.10.10]
1 www.<mydomain> [<mydomain IP>]

Computing statistics for 25 seconds...
Source to Here This Node/Link
Hop RTT Lost/Sent = Pct Lost/Sent = Pct Address
0 wkstn1.<mydomain> >[192.168.10.10]
0/ 100 = 0% |
1 0ms 0/ 100 = 0% 0/ 100 = 0% www.<mydomain> [<mydomain IP>]

Trace complete.
Click to expand...
I get the ame results whether I ping "wkstn1" or it IP address
(192.168.10.10).
It would appear that the host name (and domain names) can be resolved.
Network diagnostics refer to the Class-C 192.168.10/24 but there’s an entry
for DHCP that is point at 10.0.0.138. Not sure where the 10.0.0.138 is
coming from.

Has anyone got any clues how to resolve it?
 
Your best chance of any solution would be found here:

news://microsoft.public.windowsxp.network_web

The host is msnews.microsoft.com You don't need any username or
passwords to access this NG.

hth

I have set up my network to work through a 4-port D-Link G604T modem/router
using a local domain of 192.168.10 prefix. The DNS and DHCP resolutions
being handled by the G604T at 192.168.10.1.
All dynamic IP allocations work fine when equipment is attached. I can surf
the net and send/receive mail. But, If I try and "ping" the host “wkstn1†I
get an error. It can identify the host name (with domain name extension)_
and the assigned address. But if I try and "ping" either the host name or
the assigned IP address - it times out;-
Pinging wkstn1.<mydomain> [192.168.10.10] with 32 bytes of data:

Request timed out.
Request timed out.
Request timed out.
Request timed out.

Ping statistics for 192.168.10.10:
Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), >
Click to expand...
If I try “pathping said:
Tracing route to <mydomain> [<mydomain IP>]
over a maximum of 30 hops:
0 wkstn1.<mydomain> [192.168.10.10]
1 www.<mydomain> [<mydomain IP>]

Computing statistics for 25 seconds...
Source to Here This Node/Link
Hop RTT Lost/Sent = Pct Lost/Sent = Pct Address
0 wkstn1.<mydomain> >[192.168.10.10]
0/ 100 = 0% |
1 0ms 0/ 100 = 0% 0/ 100 = 0% www.<mydomain> [<mydomain IP>]

Trace complete.
Click to expand...
I get the ame results whether I ping "wkstn1" or it IP address
(192.168.10.10).
It would appear that the host name (and domain names) can be resolved.
Network diagnostics refer to the Class-C 192.168.10/24 but there’s an entry
for DHCP that is point at 10.0.0.138. Not sure where the 10.0.0.138 is
coming from.

Has anyone got any clues how to resolve it?
Click to expand...
 
Are you running a software firewall of any kind on the workstations? Ping
responses are regulated by most software firewalls, including those in
Windows Live OneCare, and, as I recall, the Windows Firewall itself.

--

NickK said:
I have set up my network to work through a 4-port D-Link G604T modem/router
using a local domain of 192.168.10 prefix. The DNS and DHCP resolutions
being handled by the G604T at 192.168.10.1.
All dynamic IP allocations work fine when equipment is attached. I can
surf
the net and send/receive mail. But, If I try and "ping" the host "wkstn1"
I
get an error. It can identify the host name (with domain name extension)_
and the assigned address. But if I try and "ping" either the host name or
the assigned IP address - it times out;-
Pinging wkstn1.<mydomain> [192.168.10.10] with 32 bytes of data:

Request timed out.
Request timed out.
Request timed out.
Request timed out.

Ping statistics for 192.168.10.10:
Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), >
Click to expand...
If I try "pathping said:
Tracing route to <mydomain> [<mydomain IP>]
over a maximum of 30 hops:
0 wkstn1.<mydomain> [192.168.10.10]
1 www.<mydomain> [<mydomain IP>]

Computing statistics for 25 seconds...
Source to Here This Node/Link
Hop RTT Lost/Sent = Pct Lost/Sent = Pct Address
0 wkstn1. said:
[192.168.10.10]
Click to expand...
0/ 100 = 0% |
1 0ms 0/ 100 = 0% 0/ 100 = 0% www.<mydomain> [<mydomain
IP>]

Trace complete.
Click to expand...
I get the ame results whether I ping "wkstn1" or it IP address
(192.168.10.10).
It would appear that the host name (and domain names) can be resolved.
Network diagnostics refer to the Class-C 192.168.10/24 but there's an
entry
for DHCP that is point at 10.0.0.138. Not sure where the 10.0.0.138 is
coming from.

Has anyone got any clues how to resolve it?
Click to expand...
 
agreed!

--

ANONYMOUS said:
Your best chance of any solution would be found here:

news://microsoft.public.windowsxp.network_web

The host is msnews.microsoft.com You don't need any username or
passwords to access this NG.

hth

I have set up my network to work through a 4-port D-Link G604T
modem/router
using a local domain of 192.168.10 prefix. The DNS and DHCP resolutions
being handled by the G604T at 192.168.10.1.
All dynamic IP allocations work fine when equipment is attached. I can
surf
the net and send/receive mail. But, If I try and "ping" the host
â?owkstn1â? I
get an error. It can identify the host name (with domain name
extension)_
and the assigned address. But if I try and "ping" either the host name
or
the assigned IP address - it times out;-
Pinging wkstn1.<mydomain> [192.168.10.10] with 32 bytes of data:

Request timed out.
Request timed out.
Request timed out.
Request timed out.

Ping statistics for 192.168.10.10:
Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), >
Click to expand...
If I try â?opathping said:
Tracing route to <mydomain> [<mydomain IP>]
over a maximum of 30 hops:
0 wkstn1.<mydomain> [192.168.10.10]
1 www.<mydomain> [<mydomain IP>]

Computing statistics for 25 seconds...
Source to Here This Node/Link
Hop RTT Lost/Sent = Pct Lost/Sent = Pct Address
0 wkstn1.<mydomain>
[192.168.10.10]
0/ 100 = 0% |
1 0ms 0/ 100 = 0% 0/ 100 = 0% www.<mydomain> [<mydomain
IP>]

Trace complete.
Click to expand...
I get the ame results whether I ping "wkstn1" or it IP address
(192.168.10.10).
It would appear that the host name (and domain names) can be resolved.
Network diagnostics refer to the Class-C 192.168.10/24 but thereâ?Ts an
entry
for DHCP that is point at 10.0.0.138. Not sure where the 10.0.0.138 is
coming from.

Has anyone got any clues how to resolve it?
Click to expand...
Click to expand...
 
Back
Top