Xlone HDD with XP

  • Thread starter Thread starter Majki Majk
  • Start date Start date
M

Majki Majk

Houdy!
After 1700 repairs in registry mechanic i decided i need a fresh copy of
XP, ie. reinstallation and format the harddisk. So i need to make the
whole copy of disk on to other disk of the same capacity. I really don-t
understand what will happen to files on that other disk, but i think
nothing will change, though. How to do it? How to make a copy of whole
drive so that it exists equal as this hdd exists? What program do You
suggest?


mm
 
Youre actually going to create problems with that thinking..Copy hd to hd,
is usually run to transfer the OS to a new,larger hd,or backup,etc..This is
fine so long as the old hd & OS are in great running condition.If youre OS
is fatigued,why would you reinstall it to a new hd..Try a clean install of xp
(boot to xp cd)...
 
Allen said:
Hi everybody,
I need your help. I got the blue screen. It said something about
system files. Now, the computer does not work. It goes into some
kind of cycle. It goes through all the booting procedures, until it
comes to a black screen which asks something like this: if you want
to start window in the normal mode, safe mode, safe mode with command
line, safe mode without net word or recover to the best last
configuration. During this, there is a count down from; I think 29
to 0 and all start again. Can someone help? I do not want to lose my
programs and files.
Click to expand...


Gerry Wrote:
Please post a copy of the Stop Error Report.

Disable automatic restart on system failure. This should help by
allowing time to write down the STOP code properly. Right click on
the My Computer icon on the Desktop and select Properties, Advanced,
Start-Up and Recovery, System Failure and uncheck box before
Automatically Restart.

Do not re-enable automatic restart on system failure until you have
resolved the problem. Check for variants of the Stop Error message.

An alternative is to keep pressing the F8 key during Start-Up and select
option - Disable automatic restart on system failure.

If you are using a wireless keyboard and the F8 key does not work
substitute a wired keyboard and mouse for this exercise only.
--
Hope this helps.
Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~

Allen wrote again:

Hi everybody again,
I did what Gerry told me and I have this in a blue screen:

A problem has been detected and windows has been shut down to prevent damage
to your computer.
..
..

The BIOS in this system is not fully ACPI complaint. Please contact your
system vendor or visit www.hardware-update.com for an updated BIOS. If you
are unable to obtain an updated BIOS or the latest BIOS supplied by your
vendor is not ACPI compliant, you can turn off ACPI mode during text mode
setup. To do this, simply, press F7 key when you are prompted to install
storage drivers. The system will not notify you that F7 key was pressed- it
will silently disable ACPI and allow you to continue your installation

Technical information

***stop: OX00000011, OX00000007, OXF790EOCO, OX0100000D
 
Back
Top