won't boot after Motherboard upgrade

  • Thread starter Thread starter Rick S.
  • Start date Start date
R

Rick S.

After upgrading my motherboard, Windows XP will not
boot. All I recieve is a "blue screen". I'm forced to
reload as a fresh installation. Any ideas???
 
Rick

As many replies to the same question in this newsgroup will inform you -

During the initial installation XP configures itself to suit the hardware in
order to provide a more stable system. Because of this a major change in
hardware can cause problems.

**** If you have a XP installation CD ****

You should always back up any important files in advance of a hardware
change.

Many users, myself included, prefer to do a full clean install after major
hardware changes as you describe.

The alternative, and equally valid option, is the repair install (also known
as an In-Place Upgrade).

*However, it is not designed to be a time-saving option.*

See following Knowledge Base article for details. Pay careful attention to
the possible loss of data links in the MS article and read all instructions
carefully.

How to Perform an In-Place Upgrade (Reinstallation) of Windows XP
http://support.microsoft.com/default.aspx?scid=KB;EN-US;Q315341

After doing this you may need to re-activate your installation of XP. If it
has been more than 120 days since you last re-activated you should be able
to activate over the internet, otherwise it will require a short phonecall.

After the repair install you will need to re-install any XP service packs
and updates that are not included on your XP Installation CD, but you will
not need to re-install any applications.

Hope that helps
Pete
 
Did you reinstall XP? You should have done a repair install. Boot from the
XP CD, press Enter on the first screen, press F8 to accept the license
agreement, press R to repair the current XP installation. You will have to
reload all updates, starting with SP1.
 
Greetings --

Assuming a retail license, unless the new motherboard is virtually
identical to the old one (same chipset, same IDE controllers, same
BIOS version, etc.), you'll need to perform a repair (a.k.a. in-place
upgrade) installation, at the very least:

How to Perform an In-Place Upgrade of Windows XP
http://support.microsoft.com/directory/article.asp?ID=KB;EN-US;Q315341

As always when undertaking such a significant change, back up any
important data before starting.

This will also require re-activation. If it's been more than 120
days since you last activated that specific Product Key, you'll most
likely be able to activate via the internet without problem. If it's
been less, you might have to make a 5 minute phone call.


Bruce Chambers

--
Help us help you:



You can have peace. Or you can have freedom. Don't ever count on
having both at once. -- RAH
 
Back
Top