Wirles networking

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

Hi, I have a wireless Windows XP Profesional connection to the Internet, but
capable to do LAN networking. (I don't know if that is the way to write it...
but I hope you can understand, if not please ask me). I connected a Windows
XP Home edition machine, through it, and a Window 98. I have another Laptop
running Windows 2000 Profesional, that even though it connects to the
internet, and I can see on Computers Near Me, the Windows XP Profesional
machine, I can't access it. (I used to do it before, but I don't know why I
can't anymore.) I can access information from the XP machine to the Windows
2000 but not from the Windows 2000 to the Windows XP. I Ping from the Windows
2000 machine to the Windows XP, and it replied. But when tried Net View, it
gave me this message "System error 53 has occurred. The network path was not
found." Both computers are under MSHome workgroup. Sometimes I can see the
workgroup, and open it, others it gives me a message like, workgroup not
found or something like that

Can anyone help?

Thanks,

Ivette
 
sounds like name resulotion issue. this step by step troubleshooting may help, http://www.howtonetworking.com/Troubleshooting/notaccessibale0.htm

Don't send e-mail or reply to me except you need consulting services. Posting on MS newsgroup will benefit all readers and you may get more help.

Bob Lin, MS-MVP, MCSE & CNE
How to Setup Windows, Network, Remote Access on http://www.HowToNetworking.com
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
This posting is provided "AS IS" with no warranties.
I recommend Brinkster for web hosting!

Hi, I have a wireless Windows XP Profesional connection to the Internet, but
capable to do LAN networking. (I don't know if that is the way to write it...
but I hope you can understand, if not please ask me). I connected a Windows
XP Home edition machine, through it, and a Window 98. I have another Laptop
running Windows 2000 Profesional, that even though it connects to the
internet, and I can see on Computers Near Me, the Windows XP Profesional
machine, I can't access it. (I used to do it before, but I don't know why I
can't anymore.) I can access information from the XP machine to the Windows
2000 but not from the Windows 2000 to the Windows XP. I Ping from the Windows
2000 machine to the Windows XP, and it replied. But when tried Net View, it
gave me this message "System error 53 has occurred. The network path was not
found." Both computers are under MSHome workgroup. Sometimes I can see the
workgroup, and open it, others it gives me a message like, workgroup not
found or something like that

Can anyone help?

Thanks,

Ivette
 
The problem seems to be on the Windows XP Profesional machine, because I am
able to access another computer on the same workgroup that runs Windows XP
Home edition from the Windows 2000 laptop, but the Window XP Home computer
can see the other running xp profesional but can't access it either.

Thanks again,

Ivette
 
in message
: Hi, I have a wireless Windows XP Profesional connection to the Internet,
but
: capable to do LAN networking. (I don't know if that is the way to write
it...
: but I hope you can understand, if not please ask me).

Are you saying you have a SOHO router that offers wired/wireless
connections? If so, which one. Please be specific. I will point out where
you are not specific which will prompt for more information.

: I connected a Windows
: XP Home edition machine, through it,

How? Do you have two NICs in the XP Pro system or are you referring to your
router? Are you using ICS (Internet Connection Sharing)?

: and a Window 98.

See above.

: I have another Laptop
: running Windows 2000 Profesional,

So, one of these others is a laptop also? Perhaps we'll just say another
system, running W2K Pro.

: that even though it connects to the
: internet,

How? Through the router? The XP Pro possibly running ICS?

: and I can see on Computers Near Me, the Windows XP Profesional
: machine, I can't access it.

It? You cannot access the XP Pro from the W2K Pro? How? What does "can't
access it" mean exactly?

: (I used to do it before, but I don't know why I
: can't anymore.)

Before when and what changed?

: I can access information from the XP machine to the Windows
: 2000

Again, access how? Are you using the same account name? Different name?
Are you using the command-line or Windows Explorer? Are you mapping a
drive? Do you get prompted for credentials (username/logon)?

: but not from the Windows 2000 to the Windows XP.

What error do you get?

: I Ping from the Windows
: 2000 machine to the Windows XP, and it replied.

It replied success or failure?

You got something similar:
Pinging fs1 [192.168.0.9] with 32 bytes of data:

Reply from 192.168.0.9: bytes=32 time<1ms TTL=128
Reply from 192.168.0.9: bytes=32 time=1ms TTL=128
Reply from 192.168.0.9: bytes=32 time<1ms TTL=128
Reply from 192.168.0.9: bytes=32 time=1ms TTL=128

Ping statistics for 192.168.0.9:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 1ms, Average = 0ms


: But when tried Net View, it
: gave me this message "System error 53 has occurred.

What is the full net view command you used? Are you using the same username
with the same password on each? Have you created the same username/password
pair on each?

: The network path was not
: found."

Good. What is the network path it is referring to?

: Both computers are under MSHome workgroup. Sometimes I can see the
: workgroup, and open it, others it gives me a message like, workgroup not
: found or something like that

Error messages need to be specific and please be specific re: exactly what
you did to get the error message.

This is no good:
I tried to connect to the XP Pro machine from the W2K Pro machine and
couldn't. What's wrong?

This is better:
I opened up Windows Explorer, on the W2K Pro machine and looked in Network
Neighborhood but the XP Pro machine (fill in name) was not shown. When I
look in My Network Places on XP Pro, the W2K machine is listed.

All the systems need to have:

Client for Microsoft Networks

....loaded, be in the same workgroup and have the same accounts with the same
passwords on each machine OR you must provide the correct credentials
(username/password) when trying to connect. You also need a common
protocol, usually TCP/IP, that they are all running with IP addresses that
are on the same subnet. If TCP/IP is the protocol being used, and if
NetBIOS over TCP/IP is being used on one, you'll want it on another. Your
network settings will tell you.

To see what your IP configuration is on each machine, go to a command prompt
and type in the following:

ipconfig /all

Please provide the configs for the XP Pro and W2K Pro if you're still unable
to connect. If any of these has an IP address that begins with:
169.254.x.x then it's not getting a valid IP address. If the systems are
set for DHCP (obtain an IP address automatically) then we'll need to look at
your ICS configuration, if using that, or your router config, if you have
one.

HTH...

--
Roland Hall
/* This information is distributed in the hope that it will be useful, but
without any warranty; without even the implied warranty of merchantability
or fitness for a particular purpose. */
Online Support for IT Professionals -
http://support.microsoft.com/servicedesks/technet/default.asp?fr=0&sd=tech
How-to: Windows 2000 DNS:
http://support.microsoft.com/default.aspx?scid=kb;EN-US;308201
FAQ W2K/2K3 DNS:
http://support.microsoft.com/default.aspx?scid=kb;EN-US;291382
 
Thanks Robert, I read the article, but I still have a question, where should
I enable Netbios over TCP/IP on the Windows XP profesional machine, or on the
Windows 2000 and WIndows xp home edition machines?
 
Hi Robert, I read the article, but I am new to this and I don't know where I
should net view IP, on a "good" computer or on the one that isn't accesible?
How can I verify that I have the correct DNS settings?, and how do I use WINS
and try LMHOSTS? Those are the suggestions that are written in the article,
but I have tried (the way I think it is) some things, but I still have the
same problem. I am connecting the network through the wireless modem. There
are two computers that see each other one running Window XP Home Edition and
other running Windows 2000 profesional. I can access between them, but I can
not access to the one running Window XP Professional, the one that has the
wireles modem. When I test IPCONFIG /all, all the computers have on the
Connection specific DNS suffix the name of the company of the modem
gateway.2wire.net and on the Node Type Broadcast.

THanks for your help,

Ivette
 
I am answering the questions I can trough the message

Roland Hall said:
in message
: Hi, I have a wireless Windows XP Profesional connection to the Internet,
but
: capable to do LAN networking. (I don't know if that is the way to write
it...
: but I hope you can understand, if not please ask me).

Are you saying you have a SOHO router that offers wired/wireless
connections? If so, which one. Please be specific. I will point out where
you are not specific which will prompt for more information.

I don't know Whats a SOHO router, but I have a modem that offers
wired/wireless connections. It is a 2wire 1800.
: I connected a Windows
: XP Home edition machine, through it,

How? Do you have two NICs in the XP Pro system or are you referring to your
router? Are you using ICS (Internet Connection Sharing)?

I have two NIcs, but I only use one to connect the router/modem, and I am
using Internet Connection Sharing
: and a Window 98.

See above.

: I have another Laptop
: running Windows 2000 Profesional,

So, one of these others is a laptop also? Perhaps we'll just say another
system, running W2K Pro.

I have three Desktop, one with Windows XP connected to the modem or router,
running the ICS, other running Windows 98 (that its not connected now,
because this is a wired connection I had to temporarily disconnect, but that
was working fine) Another Desktop with Windows XP Home edition, and a Laptop
with Windows 2000 professional, I can acces share folders and drives between
the last two, but frome neither both to the one that is connected to the
router/modem which has Windows XP Professional
: that even though it connects to the
: internet,

How? Through the router? The XP Pro possibly running ICS?
Yes

: and I can see on Computers Near Me, the Windows XP Profesional
: machine, I can't access it.

It? You cannot access the XP Pro from the W2K Pro? How? What does "can't
access it" mean exactly?

I can't open shared folders or drives and open their content
: (I used to do it before, but I don't know why I
: can't anymore.)

Before when and what changed?

I don't know, the only thing I have done is that I moved the computers and
that I made the updates to each one
: I can access information from the XP machine to the Windows
: 2000

Again, access how? Are you using the same account name?

Yes

Different name?

No
Are you using the command-line or Windows Explorer?

Windows Explorer
Are you mapping a > drive?

No

Do you get prompted for credentials (username/logon)?When I try to acces the Windows 2000 laptop and I use the same user and
password that I use when I am starting the laptop
: but not from the Windows 2000 to the Windows XP.

What error do you get?

Computer (the name of the computer) is Not available, The Network path is
not found
: I Ping from the Windows
: 2000 machine to the Windows XP, and it replied.

It replied success or failure?
Succesfull

You got something similar:
Pinging fs1 [192.168.0.9] with 32 bytes of data:

Reply from 192.168.0.9: bytes=32 time<1ms TTL=128
Reply from 192.168.0.9: bytes=32 time=1ms TTL=128
Reply from 192.168.0.9: bytes=32 time<1ms TTL=128
Reply from 192.168.0.9: bytes=32 time=1ms TTL=128

Ping statistics for 192.168.0.9:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 1ms, Average = 0ms


Yes

: But when tried Net View, it
: gave me this message "System error 53 has occurred.

What is the full net view command you used? Are you using the same username
with the same password on each? Have you created the same username/password
pair on each?

Net view the name of the computer
: The network path was not
: found."

Good. What is the network path it is referring to?

I would like to know
: Both computers are under MSHome workgroup. Sometimes I can see the
: workgroup, and open it, others it gives me a message like, workgroup not
: found or something like that

Error messages need to be specific and please be specific re: exactly what
you did to get the error message.
Thats not happening anymore, but if I remember well It said "Workgroup is
not available"
This is no good:
I tried to connect to the XP Pro machine from the W2K Pro machine and
couldn't. What's wrong?

If I know I wouldn't ask
This is better:
I opened up Windows Explorer, on the W2K Pro machine and looked in Network
Neighborhood but the XP Pro machine (fill in name) was not shown. When I
look in My Network Places on XP Pro, the W2K machine is listed.
Thanks for the lessons, but that wasn't what happend, I can see the XP Pro
machine on Network Neighborhood under "Computers Near Me" , but when I double
clic the Icon representing the Windows XP Pro Machine, it doesn't show the
content, I get the Message "Computer (the name of the computer) is Not
available, The Network path is not found"

All the systems need to have:

Client for Microsoft Networks

They have
....loaded, be in the same workgroup and have the same accounts with the same
passwords on each machine OR you must provide the correct credentials
(username/password) when trying to connect.

They are in the same workgroup (MSHOME) and I provide the user and password
when asked, but this only happens (or windows ask for credentials) when I am
accesing from the computers with Window XP PRo and Home Edition to the one
with Windows 2000
You also need a common
protocol, usually TCP/IP, that they are all running with IP addresses that
are on the same subnet. If TCP/IP is the protocol being used, and if
NetBIOS over TCP/IP is being used on one, you'll want it on another. Your
network settings will tell you.

I have checked all that, and I think its ok
To see what your IP configuration is on each machine, go to a command prompt
and type in the following:

ipconfig /all

I did it and they all have the same IP configuration
Please provide the configs for the XP Pro and W2K Pro if you're still unable
to connect. If any of these has an IP address that begins with:
169.254.x.x then it's not getting a valid IP address.

This is from the Window XP Professional :
C:\Documents and Settings\Ivette Z. López>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : DG859811
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : gateway.2wire.net

Ethernet adapter High-Speed Internet:

Connection-specific DNS Suffix . : gateway.2wire.net
Description . . . . . . . . . . . : 3Com EtherLink XL 10/100 PCI TX
NIC
(3C905B-TX)
Physical Address. . . . . . . . . : 00-50-04-0C-B5-2C
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 172.16.1.35
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . : 172.16.0.1
DHCP Server . . . . . . . . . . . : 172.16.0.1
DNS Servers . . . . . . . . . . . : 172.16.0.1
Lease Obtained. . . . . . . . . . : Sunday, March 27, 2005 9:32:47 PM
Lease Expires . . . . . . . . . . : Sunday, March 27, 2005 10:32:47 PM

Ethernet adapter Local Area Connection-vieja:

Media State . . . . . . . . . . . : Media disconnected
Description . . . . . . . . . . . : CNet PRO200WL PCI Fast Ethernet
Adap
ter
Physical Address. . . . . . . . . : 00-08-A1-01-D0-AB

This is from the Windows XP Home Edition:

C:\Documents and Settings\Vero>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : Veronica
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : gateway.2wire.net

Ethernet adapter Local Area Connection:

Media State . . . . . . . . . . . : Media disconnected
Description . . . . . . . . . . . : 3Com EtherLink XL 10/100 PCI TX NI
(3C905B-TX)
Physical Address. . . . . . . . . : 00-50-04-0C-A0-79

Ethernet adapter Local Area Connection 2:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : WAN Network Driver
Physical Address. . . . . . . . . : 00-03-8A-00-00-11
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 152.163.0.0
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . :

Ethernet adapter Network Bridge (Network Bridge) 2:

Connection-specific DNS Suffix . : gateway.2wire.net
Description . . . . . . . . . . . : MAC Bridge Miniport
Physical Address. . . . . . . . . : 02-30-BD-66-CB-97
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 172.16.1.33
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . : 172.16.0.1
DHCP Server . . . . . . . . . . . : 172.16.0.1
DNS Servers . . . . . . . . . . . : 172.16.0.1
Lease Obtained. . . . . . . . . . : Sunday, March 27, 2005 9:49:39 PM
Lease Expires . . . . . . . . . . : Sunday, March 27, 2005 10:49:39 PM

This is from the Windows 2000 professional system:

C:\Documents and Settings\AWAS>ipconfig /all

Windows 2000 IP Configuration

Host Name . . . . . . . . . . . . : AWAS-LPT
Primary DNS Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : gateway.2wire.net

Ethernet adapter Local Area Connection 2:

Connection-specific DNS Suffix . : gateway.2wire.net
Description . . . . . . . . . . . : Intel(R) PRO/Wireless LAN 2100
3B Mi
ni PCI Adapter
Physical Address. . . . . . . . . : 00-0C-F1-03-35-8F
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 172.16.1.34
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . : 172.16.0.1
DHCP Server . . . . . . . . . . . : 172.16.0.1
DNS Servers . . . . . . . . . . . : 172.16.0.1
Lease Obtained. . . . . . . . . . : Sunday, March 27, 2005 10:08:11 PM
Lease Expires . . . . . . . . . . : Sunday, March 27, 2005 11:08:11 PM

Ethernet adapter Local Area Connection:

Media State . . . . . . . . . . . : Cable Disconnected
Description . . . . . . . . . . . : Realtek RTL8139 Family PCI Fast
Ethe
rnet NIC
Physical Address. . . . . . . . . : 00-80-45-45-7D-08


If the systems are
set for DHCP (obtain an IP address automatically) then we'll need to look at
your ICS configuration, if using that, or your router config, if you have
one.
Yes they are set for DHCP

Thanks,

Ivette
 
assuming you are using workgrou and using your ISP DNS, what you should do is enabling the NetBIOS over TCP/IP. For more and other information, go to http://howtonetworking.com.

Don't send e-mail or reply to me except you need consulting services. Posting on MS newsgroup will benefit all readers and you may get more help.

Bob Lin, MS-MVP, MCSE & CNE
How to Setup Windows, Network, Remote Access on http://www.HowToNetworking.com
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
This posting is provided "AS IS" with no warranties.
I recommend Brinkster for web hosting!

Hi Robert, I read the article, but I am new to this and I don't know where I
should net view IP, on a "good" computer or on the one that isn't accesible?
How can I verify that I have the correct DNS settings?, and how do I use WINS
and try LMHOSTS? Those are the suggestions that are written in the article,
but I have tried (the way I think it is) some things, but I still have the
same problem. I am connecting the network through the wireless modem. There
are two computers that see each other one running Window XP Home Edition and
other running Windows 2000 profesional. I can access between them, but I can
not access to the one running Window XP Professional, the one that has the
wireles modem. When I test IPCONFIG /all, all the computers have on the
Connection specific DNS suffix the name of the company of the modem
gateway.2wire.net and on the Node Type Broadcast.

THanks for your help,

Ivette
 
I already enabled Netbios over TCP/ip, and read the article, any other
suggestions, how do I use the LMHost file?

Thanks,

Ivette
 
how to use lmhosts, click this link, http://howtonetworking.com/Windows/lmhosts.htm

Don't send e-mail or reply to me except you need consulting services. Posting on MS newsgroup will benefit all readers and you may get more help.

Bob Lin, MS-MVP, MCSE & CNE
How to Setup Windows, Network, Remote Access on http://www.HowToNetworking.com
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
This posting is provided "AS IS" with no warranties.
I recommend Brinkster for web hosting!

I already enabled Netbios over TCP/ip, and read the article, any other
suggestions, how do I use the LMHost file?

Thanks,

Ivette
 
in message
:I am answering the questions I can trough the message
:
: "Roland Hall" wrote:
:
: > "izlopez" wrote in message
: > : > : Hi, I have a wireless Windows XP Profesional connection to the
Internet,
: > but
: > : capable to do LAN networking. (I don't know if that is the way to
write
: > it...
: > : but I hope you can understand, if not please ask me).
: >
: > Are you saying you have a SOHO router that offers wired/wireless
: > connections? If so, which one. Please be specific. I will point out
where
: > you are not specific which will prompt for more information.
:
: I don't know Whats a SOHO router, but I have a modem that offers
: wired/wireless connections. It is a 2wire 1800.

This?

http://www.iapplianceweb.com/appreview/gateways_56.htm

: > : I connected a Windows
: > : XP Home edition machine, through it,
: >
: > How? Do you have two NICs in the XP Pro system or are you referring to
your
: > router? Are you using ICS (Internet Connection Sharing)?
: >
:
: I have two NIcs, but I only use one to connect the router/modem, and I am
: using Internet Connection Sharing

Why are you using ICS when you have multiple ports on the router?

: > : and a Window 98.
: >
: > See above.
: >
: > : I have another Laptop
: > : running Windows 2000 Profesional,
: >
: > So, one of these others is a laptop also? Perhaps we'll just say
another
: > system, running W2K Pro.
:
: I have three Desktop, one with Windows XP connected to the modem or
router,
: running the ICS, other running Windows 98 (that its not connected now,
: because this is a wired connection I had to temporarily disconnect, but
that
: was working fine) Another Desktop with Windows XP Home edition, and a
Laptop
: with Windows 2000 professional, I can acces share folders and drives
between
: the last two, but frome neither both to the one that is connected to the
: router/modem which has Windows XP Professional

In a peer-peer environment, all have to be in the same workgroup, all need
MS Windows Networking, and duplicate accounts on all systems if all are to
connect to each other. With 98 the username/password has to match on each
remote system to connect to as you cannot pass different credentials.

: > : that even though it connects to the
: > : internet,
: >
: > How? Through the router? The XP Pro possibly running ICS?
:
: Yes

Yes to which?

: > : and I can see on Computers Near Me, the Windows XP Profesional
: > : machine, I can't access it.
: >
: > It? You cannot access the XP Pro from the W2K Pro? How? What does
"can't
: > access it" mean exactly?
:
: I can't open shared folders or drives and open their content

Visibly seeing them has nothing to do with access rights. This of shares as
a perimeter and NTFS rights as the 2nd layer. You need to be authorized by
both and shares have to come first. As with 98, the share and the NTFS
rights have to match the 98 user. The account needs to be the same and so
does the password.

: > : (I used to do it before, but I don't know why I
: > : can't anymore.)
: >
: > Before when and what changed?
:
: I don't know, the only thing I have done is that I moved the computers and
: that I made the updates to each one

Moving probably didn't do it unless there are different connections. Which
updates?

: > : I can access information from the XP machine to the Windows
: > : 2000
: >
: > Again, access how? Are you using the same account name?
:
: Yes
:
: Different name?
:
: No
: > Are you using the command-line or Windows Explorer?
:
: Windows Explorer
: Are you mapping a > drive?
:
: No
:
: Do you get prompted for credentials (username/logon)?
: >
: When I try to acces the Windows 2000 laptop and I use the same user and
: password that I use when I am starting the laptop

Then perhaps the account on the laptop doesn't have credentials or something
is blocking it. Any personal firewalls?

: > : but not from the Windows 2000 to the Windows XP.
: >
: > What error do you get?
: >
:
: Computer (the name of the computer) is Not available, The Network path is
: not found
: > : I Ping from the Windows
: > : 2000 machine to the Windows XP, and it replied.
: >
: > It replied success or failure?
:
: Succesfull
: >
: > You got something similar:
: > Pinging fs1 [192.168.0.9] with 32 bytes of data:
: >
: > Reply from 192.168.0.9: bytes=32 time<1ms TTL=128
: > Reply from 192.168.0.9: bytes=32 time=1ms TTL=128
: > Reply from 192.168.0.9: bytes=32 time<1ms TTL=128
: > Reply from 192.168.0.9: bytes=32 time=1ms TTL=128
: >
: > Ping statistics for 192.168.0.9:
: > Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
: > Approximate round trip times in milli-seconds:
: > Minimum = 0ms, Maximum = 1ms, Average = 0ms
: >
: >
:
: Yes
:
: > : But when tried Net View, it
: > : gave me this message "System error 53 has occurred.
: >
: > What is the full net view command you used? Are you using the same
username
: > with the same password on each? Have you created the same
username/password
: > pair on each?
:
: Net view the name of the computer

net view \\computer

How about:

net use \\computer\ipc$ "" /u:""

and then:

net view \\computer

: > : The network path was not
: > : found."
: >
: > Good. What is the network path it is referring to?
: >
:
: I would like to know
:
: > : Both computers are under MSHome workgroup. Sometimes I can see the
: > : workgroup, and open it, others it gives me a message like, workgroup
not
: > : found or something like that
: >
: > Error messages need to be specific and please be specific re: exactly
what
: > you did to get the error message.
: >
: Thats not happening anymore, but if I remember well It said "Workgroup is
: not available"
:
: > This is no good:
: > I tried to connect to the XP Pro machine from the W2K Pro machine and
: > couldn't. What's wrong?
: >
:
: If I know I wouldn't ask
: > This is better:
: > I opened up Windows Explorer, on the W2K Pro machine and looked in
Network
: > Neighborhood but the XP Pro machine (fill in name) was not shown. When
I
: > look in My Network Places on XP Pro, the W2K machine is listed.
: >
: Thanks for the lessons, but that wasn't what happend, I can see the XP Pro
: machine on Network Neighborhood under "Computers Near Me" , but when I
double
: clic the Icon representing the Windows XP Pro Machine, it doesn't show the
: content, I get the Message "Computer (the name of the computer) is Not
: available, The Network path is not found"

Ok, the GUI is limited.

: > All the systems need to have:
: >
: > Client for Microsoft Networks
: >
:
: They have
: > ....loaded, be in the same workgroup and have the same accounts with the
same
: > passwords on each machine OR you must provide the correct credentials
: > (username/password) when trying to connect.
:
: They are in the same workgroup (MSHOME) and I provide the user and
password
: when asked, but this only happens (or windows ask for credentials) when I
am
: accesing from the computers with Window XP PRo and Home Edition to the one
: with Windows 2000

It only asks when the one you're logged in with fails. If accounts and
passwords are the same and workgroups are the same then something else is
blocking.

: >You also need a common
: > protocol, usually TCP/IP, that they are all running with IP addresses
that
: > are on the same subnet. If TCP/IP is the protocol being used, and if
: > NetBIOS over TCP/IP is being used on one, you'll want it on another.
Your
: > network settings will tell you.
:
: I have checked all that, and I think its ok
: >
: > To see what your IP configuration is on each machine, go to a command
prompt
: > and type in the following:
: >
: > ipconfig /all
:
: I did it and they all have the same IP configuration

Hopefully mean they're in the same subnet.

: > Please provide the configs for the XP Pro and W2K Pro if you're still
unable
: > to connect. If any of these has an IP address that begins with:
: > 169.254.x.x then it's not getting a valid IP address.
:
: This is from the Window XP Professional :
: C:\Documents and Settings\Ivette Z. López>ipconfig /all
:
: Windows IP Configuration
:
: Host Name . . . . . . . . . . . . : DG859811
: Primary Dns Suffix . . . . . . . :
: Node Type . . . . . . . . . . . . : Broadcast
: IP Routing Enabled. . . . . . . . : Yes
: WINS Proxy Enabled. . . . . . . . : No
: DNS Suffix Search List. . . . . . : gateway.2wire.net
:
: Ethernet adapter High-Speed Internet:
:
: Connection-specific DNS Suffix . : gateway.2wire.net
: Description . . . . . . . . . . . : 3Com EtherLink XL 10/100 PCI TX
: NIC
: (3C905B-TX)
: Physical Address. . . . . . . . . : 00-50-04-0C-B5-2C
: Dhcp Enabled. . . . . . . . . . . : Yes
: Autoconfiguration Enabled . . . . : Yes
: IP Address. . . . . . . . . . . . : 172.16.1.35
: Subnet Mask . . . . . . . . . . . : 255.255.0.0
: Default Gateway . . . . . . . . . : 172.16.0.1
: DHCP Server . . . . . . . . . . . : 172.16.0.1
: DNS Servers . . . . . . . . . . . : 172.16.0.1
: Lease Obtained. . . . . . . . . . : Sunday, March 27, 2005 9:32:47
PM
: Lease Expires . . . . . . . . . . : Sunday, March 27, 2005 10:32:47
PM
:
: Ethernet adapter Local Area Connection-vieja:
:
: Media State . . . . . . . . . . . : Media disconnected
: Description . . . . . . . . . . . : CNet PRO200WL PCI Fast Ethernet
: Adap
: ter
: Physical Address. . . . . . . . . : 00-08-A1-01-D0-AB
:
: This is from the Windows XP Home Edition:
:
: C:\Documents and Settings\Vero>ipconfig /all
:
: Windows IP Configuration
:
: Host Name . . . . . . . . . . . . : Veronica
: Primary Dns Suffix . . . . . . . :
: Node Type . . . . . . . . . . . . : Broadcast
: IP Routing Enabled. . . . . . . . : No
: WINS Proxy Enabled. . . . . . . . : No
: DNS Suffix Search List. . . . . . : gateway.2wire.net
:
: Ethernet adapter Local Area Connection:
:
: Media State . . . . . . . . . . . : Media disconnected
: Description . . . . . . . . . . . : 3Com EtherLink XL 10/100 PCI TX
NI
: (3C905B-TX)
: Physical Address. . . . . . . . . : 00-50-04-0C-A0-79
:
: Ethernet adapter Local Area Connection 2:
:
: Connection-specific DNS Suffix . :
: Description . . . . . . . . . . . : WAN Network Driver
: Physical Address. . . . . . . . . : 00-03-8A-00-00-11
: Dhcp Enabled. . . . . . . . . . . : No
: IP Address. . . . . . . . . . . . : 152.163.0.0
: Subnet Mask . . . . . . . . . . . : 255.255.255.255
: Default Gateway . . . . . . . . . :
:
: Ethernet adapter Network Bridge (Network Bridge) 2:
:
: Connection-specific DNS Suffix . : gateway.2wire.net
: Description . . . . . . . . . . . : MAC Bridge Miniport
: Physical Address. . . . . . . . . : 02-30-BD-66-CB-97
: Dhcp Enabled. . . . . . . . . . . : Yes
: Autoconfiguration Enabled . . . . : Yes
: IP Address. . . . . . . . . . . . : 172.16.1.33
: Subnet Mask . . . . . . . . . . . : 255.255.0.0
: Default Gateway . . . . . . . . . : 172.16.0.1
: DHCP Server . . . . . . . . . . . : 172.16.0.1
: DNS Servers . . . . . . . . . . . : 172.16.0.1
: Lease Obtained. . . . . . . . . . : Sunday, March 27, 2005 9:49:39
PM
: Lease Expires . . . . . . . . . . : Sunday, March 27, 2005 10:49:39
PM
:
: This is from the Windows 2000 professional system:
:
: C:\Documents and Settings\AWAS>ipconfig /all
:
: Windows 2000 IP Configuration
:
: Host Name . . . . . . . . . . . . : AWAS-LPT
: Primary DNS Suffix . . . . . . . :
: Node Type . . . . . . . . . . . . : Broadcast
: IP Routing Enabled. . . . . . . . : No
: WINS Proxy Enabled. . . . . . . . : No
: DNS Suffix Search List. . . . . . : gateway.2wire.net
:
: Ethernet adapter Local Area Connection 2:
:
: Connection-specific DNS Suffix . : gateway.2wire.net
: Description . . . . . . . . . . . : Intel(R) PRO/Wireless LAN 2100
: 3B Mi
: ni PCI Adapter
: Physical Address. . . . . . . . . : 00-0C-F1-03-35-8F
: DHCP Enabled. . . . . . . . . . . : Yes
: Autoconfiguration Enabled . . . . : Yes
: IP Address. . . . . . . . . . . . : 172.16.1.34
: Subnet Mask . . . . . . . . . . . : 255.255.0.0
: Default Gateway . . . . . . . . . : 172.16.0.1
: DHCP Server . . . . . . . . . . . : 172.16.0.1
: DNS Servers . . . . . . . . . . . : 172.16.0.1
: Lease Obtained. . . . . . . . . . : Sunday, March 27, 2005 10:08:11
PM
: Lease Expires . . . . . . . . . . : Sunday, March 27, 2005 11:08:11
PM
:
: Ethernet adapter Local Area Connection:
:
: Media State . . . . . . . . . . . : Cable Disconnected
: Description . . . . . . . . . . . : Realtek RTL8139 Family PCI Fast
: Ethe
: rnet NIC
: Physical Address. . . . . . . . . : 00-80-45-45-7D-08
:
:
: If the systems are
: > set for DHCP (obtain an IP address automatically) then we'll need to
look at
: > your ICS configuration, if using that, or your router config, if you
have
: > one.
: >
: Yes they are set for DHCP
:

My suggestion is plug all systems into the router, disable ICS. This should
disable routing on the XP Pro. Disable interfaces not in use on all
systems. Why does the XP Home have a WAN connection with a Class B address?
I'm assuming the 172.16.0.1 address is the router.

XP has a personal firewall builtin. What is set there?
Are there any 3rd party security apps involved, i.e. antivirus, personal
firewalls (Zone Alarm), IDS/IPS (BlackICE PCP), etc. ?

--
Roland Hall
/* This information is distributed in the hope that it will be useful, but
without any warranty; without even the implied warranty of merchantability
or fitness for a particular purpose. */
Online Support for IT Professionals -
http://support.microsoft.com/servicedesks/technet/default.asp?fr=0&sd=tech
How-to: Windows 2000 DNS:
http://support.microsoft.com/default.aspx?scid=kb;EN-US;308201
FAQ W2K/2K3 DNS:
http://support.microsoft.com/default.aspx?scid=kb;EN-US;291382
 
I undrstand totally your problems. My Lap also is the same as yours. Win XP
professional and Media edition,sp2.
When it comes to using Professional XP with IE 6.0, it does not seem o be
good stratagies by juggling from the one computer to the other that has a
totally diffrent pahse of operating systems.

Multiple users for diffrent operatinfg systems confront the various problems
with its connection , Internet Explore , a sigh pop-up saying "This page
cannot be displayed". This is a thread from 2 Wire. They manipualte end users
operating system because they are concern about security , also holding their
business terirtory. I in recent made commnets on this kind of problems to
2wire. ( I have problems with Wireless Functions with Linksys,but the end
tiurnedout to alright. ) Surprisingly, they want me to keep an ethernet cable
to my laptop as well as SBC cable. If I moves the ethernet cable back to the
router(Wireless) with USB cable staying into My laptop, No connection to
internet"Yahoo" eventhough one of cable still incerted into my Laptop frpm
2Wire directly. This portal, or home portal should be improved.
 
Back
Top