Wireless Mouse Problem

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I have a wireless mouse and when I stop moving the mouse the light on the reciving end still blinks, also the light on the mose part of it flickers sometimes when I turn it upside down to look at the light inside

This hard somtimes to control the motion of it when I using it and trying to click on somtheing small and the mouse pointer just jumps around. What can I do to stop this

Thxk in Adv ...
 
Hi

Change the mouse settings, reduce the acceleration to slower rate

Pete


----- AndreL wrote: ----

Yes I have tried new batteries I forgot to post that.
 
AndreL said in news:[email protected]:
I have a wireless mouse and when I stop moving the mouse the light on
the reciving end still blinks, also the light on the mose part of it
flickers sometimes when I turn it upside down to look at the light
inside.

This hard somtimes to control the motion of it when I using it and
trying to click on somtheing small and the mouse pointer just jumps
around. What can I do to stop this.

Thxk in Adv ...
Click to expand...

Have you pressed the sync button on the receiver and the mouse?

Have you checked that no one near you also uses a cordless mouse? I've
seen one user have problems because another user up one floor and about
50 feet away was also using a cordless mouse although, I believe, the
max distance apart is supposed to be 15 feet with a recommendation that
they be 12 feet apart.

Uninstall the vendor's mouse software, reboot to use the std ps/2 mouse
driver, configure the ps/2 driver to its defaults (no acceleration,
medium speed, no snap-to button action, no clicklock), and then
reinstall the vendor's mouse software.

Have you tried upping the sampling rater and/or buffer size (Device
Manager, properties for the mouse device)?
 
Back
Top