windwithme’s Core i7 review Part 4-DFI LANParty UT X58-T3eH8 overclocking

windwithme

windwithme

Joined
Dec 1, 2008
Messages
730
Reaction score
47
Intel unveiled Core i7 (LGA1366) CPU in November 2008, and X58+ICH10R is the only solution that compatible with it.
There are many brands launched X58 motherboards within this few months, and the price is divided into two segments.
One is hi-end product that higher USD $300, the other one is mainstream that below USD $250.

To compare with X48 solution, DFI launched X58 product earlier than before.
DFI unveiled hi-end UT X58 in December 2008, and DK X58 follows it within one month.
The most interest thing is DFI also launched microATX edition X58 which called “JR X58-T3H6”.

The leader role today is “DFI LANParty UT X58-T3eH8”, the price is same with other hi-end competitors.
UT is the highest level in LANParty series, I believe the quality & material will be great!


The color box: DFI use totally different design for the new product.
dutx5801.jpg


Accessories
A thick user manual, cables, I/O shield, utility DVD, SLI bridge for 3-Way SLI.
dutx5802.jpg


The audio daughter card, powered by Realtek ALC 889; the capacitors are Tantalum-cap.
Flame freezer is an unique feature in LANParty UT series, you can install it into I/O shield for balancing the case temperature;
also, you can install it on north bridge. Of course, the best quality thermal paste and installation guide are accompanying it.
dutx5803.jpg


DFI LANParty UT X58-T3eH8
dutx5804.jpg


dutx5805.jpg


dutx5806.jpg


Bottom left of board
3 PCIe x16 (Supports x16/ x16/ x4 and x16/ x8/ x8 mode for ATI CrossFireX & NVIDIA 3-way SLI)
1 PCIe x4
2 PCI
dutx5807.jpg


Bottom right of board
6 SATA II(with RAID 0/ 1/ 5/ 10 by ICH10R)
2 SATA II(with RAID 0/ 1/ JBOD by JMicron JMB363)
Power/ Reset buttons (Press at the same time for clearing CMOS)
Debug LED
dutx5808.jpg


Upper right of board
6 DIMM DDR3, supports 800/ 1066/ 1333/ 1600 (OC) (DFI is conservative in writing specification, ; actually, you can OC DDR3 modules up to 2000MHz)
1 IDE by JMicron JMB363
dutx5809.jpg


Upper left of board
8-phase full digital PWM, this is the most unique feature in DFI UT series.
dutx5810.jpg
 
I/O in rear panel
6 USB 2.0
1 IEEE 1394 port
2 RJ45 Gigabit LAN port
dutx5811.jpg


DFI LANParty UT X58 cooler design
dutx5812.jpg


Cooler on ICH10R. The metal plate makes it more luxurious.
dutx5813.jpg



Large black cooler on north bridge. The cooler design increase the surface for eliminating heat.
The “easy to screw up” design makes you change the cooler into water cooling kit without damaging north bridge.
dutx5814.jpg


The tri-channel DDR3 architecture is a significant revolution on LGA 1366 platform.
dutx5815.jpg


dutx5816.jpg


Install Flame Freezer in rear I/O (You can also install it on north bridge).
dutx5817.jpg


dutx5818.jpg



The boot screen
dutx58b01.jpg


The main page of BIOS
dutx58b02.jpg
 
When overclocking, the DRAM/ UnCore ratio should be around 1:2.
dutx58b03.jpg


CPU Feature
dutx58b04.jpg


DRAM parameter
Default of « Memory LowGap » is 1536M , you can set it into 1024M for better performance.
dutx58b05.jpg


Voltage setting
There are many options for tuning, but you can try the most important four settings first.
CPU VID Control 1.06255~1.60000V
CPU VID Special Add 100.23~114.88%
Vcore Droop Control (to avoid the drop of voltage)
DRAM Bus Voltage 1.455~2.400V
CPU VTT Special Add +0.0125~0.1875V
CPU VTT Voltage 1.21~1.61V
(Turn off “O.C. Shut Down Free” when overclocking)
dutx58b06.jpg


PC Health Status
dutx58b07.jpg


The picture above is the setting for 200/ 2000MHz, you can refer it for overclocking if you have the same platform
(Note: the result might be different caused by CPU/ Memory quality)


Testing platform
CPU: Intel Core i7 965 Extreme
MB: DFI LANParty UT X58-T3eH8
DRAM: CORSAIR Dominator 2GBX3 DDR3 1866C9D
VGA: MSI N9600GT Diamond SLI
HD: SAMSUNG 250GB
POWER: Corsair HX1000W Modular Power Supply
Cooler: DFI LANParty Cooler/JETART Nano Diamond/Lubic
dutx5819.jpg


About DRAM
CORSAIR Dominator 2GBX3 DDR3 1866C9D
The default specification is DDR3 1866 CL9 9-9-24 1.65V
DDR3 1862 CL9 9-9-24 1T,1.64V
SP2004 3 X Blend Mode
dutx581866c9sp.png


DDR3 1862 CL8 8-8-24 1T,1.64V
SP2004 3 X Blend,5.86GB (Stable when in heavy loading)
dutx581866c8sp.png


DDR3 1862 CL9 9-9-24 1T
Sandra Memory Bandwidth-32362MB/s
EVEREST Memory Read-20145MB/s
dutx581866c8mem.png


DDR3 1999 CL9 9-9-24 1T,164V
SP2004 3 X Blend,5.71GB(Stable when in heavy loading)
dutx582002000sp.png
 
DDR3 1999 CL9 9-9-24 1T
Sandra Memory Bandwidth-34312MB/s
EVEREST Memory Read-20960MB/s
dutx582002000mem.png


DDR3 2101 CL9 9-9-20 1T,187V
Hyper PI 4 X 32M,HT Turn off
dutx582100pi.png


DDR3 2130 CL9 9-9-24 1T
Sandra Memory Bandwidth-35648MB/s
EVEREST Memory Read-21768MB/s
dutx582133mem.png


The memory performance of tri-channel architecture is awesome; the result is 2~3 times higher than dual channel.
DFI did great job in DRAM overclocking again, especially in high FSB mode.

About CPU
Intel Core i7 Extreme 965
OC 20X20=>3997Mhz
DDR3 1999 CL9 9-9-24 1T

CrystalMark 2004R3
dutx584gcm.png


CINEBENCH R10
dutx584gcb.png


Hyper PI 4 X 32M,HT Turn off
dutx582002000pi4.png


Hyper PI 8 X 32M,HT Turn on
dutx582002000pi8.png


When I OC CPU to 4GHz (200FSB/ 2000DRAM), DFI UT X58 finished all benchmark stably; it also got high score in CPU/ DDR3 test.

About 3D
MSI N9600GT Diamond SLI

3DMARK2006
dutx584g06.png


3DMARK VANTAGE
dutx584gvanw.png


Crysis Benchmark
dutx584ggcb.png


X58 supports both ATI CrossFireX & NVIDIA SLI technology; if you are hare core gamer, you have more flexibility in choosing VGA cards.

Conclusion
Advantage
1. The highest level of LANParty series, adopts the best materials.
2. 8-Phase full digital PWM; all Japan made solid capacitors; Flame Freeze cooler.
3. Wide range of parameter of BIOS setting; supports ABS technology
4. Potential for hi-frequency with the best stability; it takes lower voltage for higher frequency than competitors.
5. Special large-sized cooler for better stability.
6. On board gPower/ Reseth buttons.

Weakness
1. Change Realtek ALC889 into Creative should be better.
2. No eSATA

Performance 10/10
Material 9/10
Appearance 8/10
Price 7/10


DFI did great job in the new platform. When OC DDR3, you can get higher frequency with lower voltage.
Beside, you can also OC higher in CPU/ DDR3. LANParty UT series always come with the best quality, performance & overclocking.

However, DFI still have to improve in gPriceh.
If DFI can refer to competitors price and make more exposure in retail market, DFI will getting better & better.
Also, I hope DFI can keep launching more mid-high product for users.
In conclusion, if you are a gperformance orientedh user, I recommend DFI LANParty UT X58 for you.
 
Last edited:
Back
Top