R
Roy
I am still having the problem with Windows rebooting so I unchecked
automatically restart in startup and recovery. I got this message today
when I got a blue screen. It basically said, A problem has been detected
and windows has been shut down to prevent damage. Page fault in nonpaged
area. Then this, xxx stop: 0x0000050 (0xa9f8d04c, 0x00000000, 0x804fffb9,
0x00000000). I have no idea what this means or what causes it. This is the
third different computer by two different manufacturers that this happens
to. It was suggested I try a UPS which I did but that didn't help.
The codes that are sent to Microsoft when reporting the error are," BCCode :
10000050 BCP1 : A3D3504C BCP2 : 00000000 BCP3 : 804FFFB9 BCP4 :
00000000 OSVer : 5_1_2600 SP : 1_0 Product : 768_1
I have no idea and am open to any ideas.
Below is a copy of my original post to provide a little more background on
this problem if it would be of any help.
Roy
****************************************************************************
******************
This most likely isn't a WinXP only problem but here goes.
My computer reboots on it's own and I can't figure out why. As a matter of
fact, this is the third computer that is doing the same thing. I got a used
computer for my wife to use in our room.The first computer was a used Dell
Optiplex PII 266. When it began to restart, I replaced it with an identical
model. the same problem occurred. I replace the Matrox Millenium II with a
3Dfx Banshee. Same problem. I then replaced the second computer with an IBM
PC with a PIII 667 cpu which has 512mb rambus memory and a S3 Savage 4
card. Same problem. It has happened with Win95, 98, Me, and now XP.
It hasn't happened with the computer that I built 4 years ago, or on the
computers that I built for my children.
At first I blamed it on AOL, and I'm not sure that the software is not a
fault. The computer will restart unexpectantly when starting the program or
using it; but not everytime. Two weeks may go by without it restarting. It
has also happened when starting MS Word or just logging in when starting
WinXP. I've changed power cords, power strips, used an extension cord to
connect to the power in the room with my other computer, which hasn't
exhibited these symptoms.
The only thing that the Microsoft reports says that it is a device driver
but cannot identify the driver. The event view has an error message that
says this "Error code 10000050, parameter1 aaf6504c, parameter2 00000000,
parameter3 804fffb9, parameter4 00000000."
I don't know what it means and I have run out of ideas. I scanned the
computer for viruses and it was clean. It has never happened when running
256 colors but I haven't run it in this mode for very long. On the first
computer, it would happen about once a day when running 32 bit color and as
I just said, never with 256 color. I don't know if this is related or not.
The only thing that I haven't done is physically removed it from this room
and tried it in another room. I have a DSL connection and connect
wirelessly with a Linksys router. I have all of the latest drivers and at
this point am looking for suggestions, advice, etc. Sorry for being so
wordy.
Roy
automatically restart in startup and recovery. I got this message today
when I got a blue screen. It basically said, A problem has been detected
and windows has been shut down to prevent damage. Page fault in nonpaged
area. Then this, xxx stop: 0x0000050 (0xa9f8d04c, 0x00000000, 0x804fffb9,
0x00000000). I have no idea what this means or what causes it. This is the
third different computer by two different manufacturers that this happens
to. It was suggested I try a UPS which I did but that didn't help.
The codes that are sent to Microsoft when reporting the error are," BCCode :
10000050 BCP1 : A3D3504C BCP2 : 00000000 BCP3 : 804FFFB9 BCP4 :
00000000 OSVer : 5_1_2600 SP : 1_0 Product : 768_1
I have no idea and am open to any ideas.
Below is a copy of my original post to provide a little more background on
this problem if it would be of any help.
Roy
****************************************************************************
******************
This most likely isn't a WinXP only problem but here goes.
My computer reboots on it's own and I can't figure out why. As a matter of
fact, this is the third computer that is doing the same thing. I got a used
computer for my wife to use in our room.The first computer was a used Dell
Optiplex PII 266. When it began to restart, I replaced it with an identical
model. the same problem occurred. I replace the Matrox Millenium II with a
3Dfx Banshee. Same problem. I then replaced the second computer with an IBM
PC with a PIII 667 cpu which has 512mb rambus memory and a S3 Savage 4
card. Same problem. It has happened with Win95, 98, Me, and now XP.
It hasn't happened with the computer that I built 4 years ago, or on the
computers that I built for my children.
At first I blamed it on AOL, and I'm not sure that the software is not a
fault. The computer will restart unexpectantly when starting the program or
using it; but not everytime. Two weeks may go by without it restarting. It
has also happened when starting MS Word or just logging in when starting
WinXP. I've changed power cords, power strips, used an extension cord to
connect to the power in the room with my other computer, which hasn't
exhibited these symptoms.
The only thing that the Microsoft reports says that it is a device driver
but cannot identify the driver. The event view has an error message that
says this "Error code 10000050, parameter1 aaf6504c, parameter2 00000000,
parameter3 804fffb9, parameter4 00000000."
I don't know what it means and I have run out of ideas. I scanned the
computer for viruses and it was clean. It has never happened when running
256 colors but I haven't run it in this mode for very long. On the first
computer, it would happen about once a day when running 32 bit color and as
I just said, never with 256 color. I don't know if this is related or not.
The only thing that I haven't done is physically removed it from this room
and tried it in another room. I have a DSL connection and connect
wirelessly with a Linksys router. I have all of the latest drivers and at
this point am looking for suggestions, advice, etc. Sorry for being so
wordy.
Roy