Windows 2k as router

  • Thread starter Thread starter tony wong
  • Start date Start date
T

tony wong

i wish to set Windows 2K as router. i have 2 LAN card.

LANcard-A 192.168.1.2 (can ping network object 192.168.1.x)

LANcard-B 202.x.x.2 (cannot ping network object 202.x.x.x)

gateway 202.x.x.1 (cannot ping gateway)

i have enabled IP routing in Windows 2K, i am sure both LANcards are in
order.

What else i forget? Thanks a lot.

Tony
 
quoted from http://www.ChicagoTech.net
Can't ping external NIC while RRAS is active
Symptoms: After you configure the RRAS as a VPN server with two or more
network adapters, pinging the external network adapter does not work. This
behavior occurs only while RRAS is running and is by design to tighten
security on the Internet VPN server.
Resolution: To allow pinging to and from the external NIC, add Inbound and
Outbound filters to the adapter to allow Internet Control Message Protocol
(ICMP) packets to be processed on the adapter. To do this, go to Routing and
Remote Access>IP Routing>General. In the right pane, right-click the adapter
that has been configured as the external adapter, and then click
Properties>Input Filters>Add. In the Protocol box, click ICMP. Click Output
Filters, and then repeat the previous three steps.

--
For more and other information, go to http://www.ChicagoTech.net

Don't send e-mail or reply to me except you need consulting services.
Posting on MS newsgroup will benefit all readers and you may get more help.

Robert Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN, Anti-Virus, Tips & Troubleshooting on
http://www.ChicagoTech.net
This posting is provided "AS IS" with no warranties.
 
Back
Top