Windows 2008 Domain Name Rename

  • Thread starter Thread starter AJ
  • Start date Start date
A

AJ

Hi Folks

Is renaming a domain easier to acheive in Windows 2008 than it was in
Windows 2003?
Are there any benefits of doing this when our domain has been upgraded
to 2008 as opposed to beforehand (2003)?

I understand the tool is now included with Windows 2008 but wondered
if the process was easier i.e. less risk.

Any input appreciated

TIA
AJ
 
Howdie!
Is renaming a domain easier to acheive in Windows 2008 than it was in
Windows 2003?
Are there any benefits of doing this when our domain has been upgraded
to 2008 as opposed to beforehand (2003)?

I understand the tool is now included with Windows 2008 but wondered
if the process was easier i.e. less risk.
Click to expand...

How's the domain's setup? In general, the more services that rely on
Active Directory, e.g. Exchange, DFS, Sharepoint, third party,..., the
more I'd think about moving towards different solutions than simple
rename. Renames can get complicated if Exchange and the like are involved.

Also, I've seen little reason, I mean *real* reason to really rename a
domain. Is it a merger? Is there a change you can create a new
forest/domain and then migrate into that new domain? Is it just
policital? The domain won't be seen from external resources - it's just
what's resolved internally. I wouldn't go down that hassle if there's
not valid reason to do so.

Cheers,
Florian
--
Microsoft MVP - Group Policy
eMail: prename [at] frickelsoft [dot] net.
blog: http://www.frickelsoft.net/blog.
ANY advice you get on the Newsgroups should be tested thoroughly in your
lab.
 
Howdie!
Is renaming adomaineasier to acheive in Windows 2008 than it was in
Windows 2003?
Are there any benefits of doing this when ourdomainhas been upgraded
to 2008 as opposed to beforehand (2003)?
Click to expand...
I understand the tool is now included with Windows 2008 but wondered
if the process was easier i.e. less risk.
Click to expand...

How's thedomain'ssetup? In general, the more services that rely on
Active Directory, e.g. Exchange, DFS, Sharepoint, third party,..., the
more I'd think about moving towards different solutions than simplerename. Renames can get complicated if Exchange and the like are involved.

Also, I've seen little reason, I mean *real* reason to reallyrenameadomain. Is it a merger? Is there a change you can create a new
forest/domainand then migrate into that newdomain? Is it just
policital? Thedomainwon't be seen from external resources - it's just
what's resolved internally. I wouldn't go down that hassle if there's
not valid reason to do so.

Cheers,
Florian
--
Microsoft MVP - Group Policy
eMail: prename [at] frickelsoft [dot] net.
blog:http://www.frickelsoft.net/blog.
ANY advice you get on the Newsgroups should be tested thoroughly in your
lab.
Click to expand...

Hi

sorry for the late reply!

its a simple single domain model although Exchange is deployed. The
domain name represents an old company name and the powerrs that be
want it changed, decision has been made. We have already discussed
migrating to a parallel environment and that is a non starter due to
the cost and complexities involved with this. If it were a small shop
things might be different. I have looked at renaming a domain a while
back for another customer and it was doable although wasn't risk free
in fact far from it. My question was does 2008 simplify the process or
is it exactly the same as it was with 2003?

TIA

AJ
 
Hello AJ,

The way is still the same. And as Florian states, depending on installed
applications like Exchange or Sharepoint renaming is having restrictions/requirements
or maybe a nogo.

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

Howdie!
Is renaming adomaineasier to acheive in Windows 2008 than it was in
Windows 2003?
Are there any benefits of doing this when ourdomainhas been upgraded
to 2008 as opposed to beforehand (2003)?
I understand the tool is now included with Windows 2008 but wondered
if the process was easier i.e. less risk.
Click to expand...
How's thedomain'ssetup? In general, the more services that rely on

Active Directory, e.g. Exchange, DFS, Sharepoint, third party,...,
the

more I'd think about moving towards different solutions than
simplerename. Renames can get complicated if Exchange and the like
are involved.

Also, I've seen little reason, I mean *real* reason to
reallyrenameadomain. Is it a merger? Is there a change you can create
a new

forest/domainand then migrate into that newdomain? Is it just

policital? Thedomainwon't be seen from external resources - it's just

what's resolved internally. I wouldn't go down that hassle if there's

not valid reason to do so.

Cheers,
Florian
--
Microsoft MVP - Group Policy
eMail: prename [at] frickelsoft [dot] net.
blog:http://www.frickelsoft.net/blog.
ANY advice you get on the Newsgroups should be tested thoroughly in
your
lab.
Click to expand...
Hi

sorry for the late reply!

its a simple single domain model although Exchange is deployed. The
domain name represents an old company name and the powerrs that be
want it changed, decision has been made. We have already discussed
migrating to a parallel environment and that is a non starter due to
the cost and complexities involved with this. If it were a small shop
things might be different. I have looked at renaming a domain a while
back for another customer and it was doable although wasn't risk free
in fact far from it. My question was does 2008 simplify the process or
is it exactly the same as it was with 2003?

TIA

AJ
Click to expand...
 
AJ said:
Howdie!
Is renaming adomaineasier to acheive in Windows 2008 than it was in
Windows 2003?
Are there any benefits of doing this when ourdomainhas been upgraded
to 2008 as opposed to beforehand (2003)?
Click to expand...
I understand the tool is now included with Windows 2008 but wondered
if the process was easier i.e. less risk.
Click to expand...

How's thedomain'ssetup? In general, the more services that rely on
Active Directory, e.g. Exchange, DFS, Sharepoint, third party,..., the
more I'd think about moving towards different solutions than
simplerename. Renames can get complicated if Exchange and the like are
involved.

Also, I've seen little reason, I mean *real* reason to
reallyrenameadomain. Is it a merger? Is there a change you can create a
new
forest/domainand then migrate into that newdomain? Is it just
policital? Thedomainwon't be seen from external resources - it's just
what's resolved internally. I wouldn't go down that hassle if there's
not valid reason to do so.

Cheers,
Florian
--
Microsoft MVP - Group Policy
eMail: prename [at] frickelsoft [dot] net.
blog:http://www.frickelsoft.net/blog.
ANY advice you get on the Newsgroups should be tested thoroughly in your
lab.
Click to expand...

Hi

sorry for the late reply!

its a simple single domain model although Exchange is deployed. The
domain name represents an old company name and the powerrs that be
want it changed, decision has been made. We have already discussed
migrating to a parallel environment and that is a non starter due to
the cost and complexities involved with this. If it were a small shop
things might be different. I have looked at renaming a domain a while
back for another customer and it was doable although wasn't risk free
in fact far from it. My question was does 2008 simplify the process or
is it exactly the same as it was with 2003?

TIA

AJ
Click to expand...


What version of Exchange?

If Exchange 2007, no it is not possible without uninstalling, then
reinstalling Exchange. As Meinolf and Florian said, it also depends on other
services and apps installed in the infrastructure whether they can handle a
rename or not.

My blog has additional information on renames, below.

Domain Rename With or Without Exchange
http://msmvps.com/blogs/acefekay/archive/2009/08/19/domain-rename-with-or-without-exchange.aspx

--
Ace

This posting is provided "AS-IS" with no warranties or guarantees and
confers no rights.

Please reply back to the newsgroup or forum for collaboration benefit among
responding engineers, and to help others benefit from your resolution.

Ace Fekay, MCT, MCITP EA, MCTS Windows 2008 & Exchange 2007, MCSE & MCSA
2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer

For urgent issues, please contact Microsoft PSS directly. Please check
http://support.microsoft.com for regional support phone numbers.
 
Back
Top