Windows 2000 streaming error

  • Thread starter Thread starter Yony Goldblat
  • Start date Start date
Y

Yony Goldblat

Hi there,

We recently upgraded our systems to a much faster server.
Only the hardware changed, and a fresh installation of
Windows 2000 server was done on the new system.
We transferred the entire intranet to the new server, but
then we found out that a primary service is not working.
This service brings secured documents from a directory on
the server.
This application worked 100% fine on the old server but
on the new server it seems to be "randomly" working.
The application is taken from a Microsoft site (it's a
simple adodb.stream which sends a binary file to the
client) and since it worked fine on the old server we
assume that it is not a programming error.
The error messages it gives us are randomly displayed -
pressing the Refresh key brings every time a different
error message, and sometimes opens the document with no
problems. Again, it seems randomally! Here are the 2
error messages:

1)
Provider (0x8007000E)
Not enough storage is available to complete this
operation.

2)
ADODB.Stream (0x800A0BBA)
File could not be opened.


We have lots of free space on the HD (about 100GB) and
lots of free memory.
My guess is that windows has some kind of cache where it
stores files which are going to be binary sent by stream,
then these files are filling this cache/buffer up to
it's capacity. I haven't found any documentation about
it, so it's just a guess.

Does anyone have any idea how to solve this weird problem?

Thanks,
Yony Goldblat
IT Developer
Philips Medical Systems
 
Cross-post when necessary, but never multi-post. Cross-posting is when you
include two or more groups in the "Newsgroups:" section. In this scenario
the message and all responses are seen in all groups that the message was
cross-posted to. In other words any replies will automatically propagate to
the other newsgroup posts.

Multi-posting is when you post the same message to two or more groups
individually. In this scenario the message is seen in the groups it is
posted to, but the responses are only seen attached to the message (unless
you cross-post the reply) in which the response was made. So those that
frequent these groups then need to deal with or re-read the posts. It may
seem like a small thing to keep track of. But some of us actively traverse
50 or more groups. The poster also then must search out all of the posts to
see if there was a response.

--
Regards,

Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft MVP [Windows NT/2000 Operating Systems]
Microsoft Certified Professional [Windows 2000]
http://www.microsoft.com/protect


:
| Hi there,
|
| We recently upgraded our systems to a much faster server.
| Only the hardware changed, and a fresh installation of
| Windows 2000 server was done on the new system.
| We transferred the entire intranet to the new server, but
| then we found out that a primary service is not working.
| This service brings secured documents from a directory on
| the server.
| This application worked 100% fine on the old server but
| on the new server it seems to be "randomly" working.
| The application is taken from a Microsoft site (it's a
| simple adodb.stream which sends a binary file to the
| client) and since it worked fine on the old server we
| assume that it is not a programming error.
| The error messages it gives us are randomly displayed -
| pressing the Refresh key brings every time a different
| error message, and sometimes opens the document with no
| problems. Again, it seems randomally! Here are the 2
| error messages:
|
| 1)
| Provider (0x8007000E)
| Not enough storage is available to complete this
| operation.
|
| 2)
| ADODB.Stream (0x800A0BBA)
| File could not be opened.
|
|
| We have lots of free space on the HD (about 100GB) and
| lots of free memory.
| My guess is that windows has some kind of cache where it
| stores files which are going to be binary sent by stream,
| then these files are filling this cache/buffer up to
| it's capacity. I haven't found any documentation about
| it, so it's just a guess.
|
| Does anyone have any idea how to solve this weird problem?
|
| Thanks,
| Yony Goldblat
| IT Developer
| Philips Medical Systems
|
 
Cross-post when necessary, but never multi-post. Cross-posting is when you
include two or more groups in the "Newsgroups:" section. In this scenario
the message and all responses are seen in all groups that the message was
cross-posted to. In other words any replies will automatically propagate to
the other newsgroup posts.

Multi-posting is when you post the same message to two or more groups
individually. In this scenario the message is seen in the groups it is
posted to, but the responses are only seen attached to the message (unless
you cross-post the reply) in which the response was made. So those that
frequent these groups then need to deal with or re-read the posts. It may
seem like a small thing to keep track of. But some of us actively traverse
50 or more groups. The poster also then must search out all of the posts to
see if there was a response.

--
Regards,

Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft MVP [Windows NT/2000 Operating Systems]
Microsoft Certified Professional [Windows 2000]
http://www.microsoft.com/protect


:
| Hi there,
|
| We recently upgraded our systems to a much faster server.
| Only the hardware changed, and a fresh installation of
| Windows 2000 server was done on the new system.
| We transferred the entire intranet to the new server, but
| then we found out that a primary service is not working.
| This service brings secured documents from a directory on
| the server.
| This application worked 100% fine on the old server but
| on the new server it seems to be "randomly" working.
| The application is taken from a Microsoft site (it's a
| simple adodb.stream which sends a binary file to the
| client) and since it worked fine on the old server we
| assume that it is not a programming error.
| The error messages it gives us are randomly displayed -
| pressing the Refresh key brings every time a different
| error message, and sometimes opens the document with no
| problems. Again, it seems randomally! Here are the 2
| error messages:
|
| 1)
| Provider (0x8007000E)
| Not enough storage is available to complete this
| operation.
|
| 2)
| ADODB.Stream (0x800A0BBA)
| File could not be opened.
|
|
| We have lots of free space on the HD (about 100GB) and
| lots of free memory.
| My guess is that windows has some kind of cache where it
| stores files which are going to be binary sent by stream,
| then these files are filling this cache/buffer up to
| it's capacity. I haven't found any documentation about
| it, so it's just a guess.
|
| Does anyone have any idea how to solve this weird problem?
|
| Thanks,
| Yony Goldblat
| IT Developer
| Philips Medical Systems
|
 
Back
Top