M
Mark Kooser
windows 2000 floppy boot disks flash bios
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
L
Lanwench [MVP - Exchange]
Pardon?
M
Mark Kooser
Oops. Text didn't get saved. Ok, created 4 floppy boot
disks from makeboot on cd. When I boot from those 4
floppies I get the windows setup/repair screen. I need to
get to the DOS prompt to flash the bios on my mother
board. I've tried setting the boot config setup to "boot
to os," with no luck. Question is, using the 4 boot
floppies, how to get to the DOS prompt?
disks from makeboot on cd. When I boot from those 4
floppies I get the windows setup/repair screen. I need to
get to the DOS prompt to flash the bios on my mother
board. I've tried setting the boot config setup to "boot
to os," with no luck. Question is, using the 4 boot
floppies, how to get to the DOS prompt?
G
Guest
Think I found something in the hardware section... The
note says,
"Get a boot image disk for MS-DOS 6.22 and boot from it.
Then run the flash program."
Anyone tried this?
Thx.
note says,
"Get a boot image disk for MS-DOS 6.22 and boot from it.
Then run the flash program."
Anyone tried this?
Thx.
J
Jetro
NT is not DOS.
Download one floppy image from www.bootdisk.com.
Download one floppy image from www.bootdisk.com.
L
Lanwench [MVP - Exchange]
Additionally, most recent-generation BIOS updates I've seen create a
bootable floppy on their own.
bootable floppy on their own.