Window going blank

  • Thread starter Thread starter Cliff
  • Start date Start date
C

Cliff

On certain sites, the page will load completely, then the
window will go blank. The message on the lower left of
the browser window will say "done", but there won't be
anything in the window. I've tried refresh, shift-
refresh, back-and-forward, retyping the address, re-
hotlinking the site, and nothing works. If anybody has a
solution to this, it would be greatly appreciated, as this
is getting very frustrating, thanks.
 
Hi Cliff :-)
On certain sites, the page will load completely, then the
window will go blank. The message on the lower left of
the browser window will say "done", but there won't be
anything in the window. I've tried refresh, shift-
refresh, back-and-forward, retyping the address, re-
hotlinking the site, and nothing works. If anybody has a
solution to this, it would be greatly appreciated, as this
is getting very frustrating, thanks.

It is possible you have a hijacker, malware, spyware or parasites on your
system that can cause this problem. In addition to running your updated
anti-virus program, you should do the following to be sure none of these
are present on your system. Follow all instructions carefully:

Dealing with Unwanted Spyware and Parasites:
http://mvps.org/winhelp2002/unwanted.htm
Be sure to run CWShredder, Ad-aware and Spybot.
Also be sure to use the HijackThis. Please do not post your log to this
newsgroup, but to the SpywareInfo or the Aumha HiJackThis forums
http://forum.aumha.org/viewforum.php?f=30, to allow the experts there to
evaluate your log and advise you of the necessary steps to clean your
system.

CAUTION!!!!! Before you try to remove spyware using any of the programs
below, download a copy of LSPFIX from any of the following sites:
http://www.cexx.org/lspfix.htm
http://www.spychecker.com/program/winsockxpfix.html
(if your OS is Win2k or XP) The process of removing certain malware may kill
your internet connection. If this should occur, this program, LSPFIX, will
enable you to regain your connection.

Also, get a copy of WINSOCKFIX available at:
http://www.spychecker.com/program/winsockxpfix.html
and
AdAware SE
http://www.lavasoftusa.com/support/download/
Update immediately after installing before using


If these steps do not resolve your problem, please post back to this thread
with the details and any error messages.


Hope this helps

Jan :)
Smiles are meant to be shared,
that's why they're so contagious.

Please reply to the newsgroup so others may benefit.
Replies are posted only to the newsgroup for the benefit or other readers.

How to make a good newsgroup post:
http://www.dts-l.org/goodpost.htm
 
Hi Cliff :-)
On certain sites, the page will load completely, then the
window will go blank. The message on the lower left of
the browser window will say "done", but there won't be
anything in the window. I've tried refresh, shift-
refresh, back-and-forward, retyping the address, re-
hotlinking the site, and nothing works. If anybody has a
solution to this, it would be greatly appreciated, as this
is getting very frustrating, thanks.

Here is a bit more information you might try:

Blank Pages - Windows

http://inetexplorer.mvps.org/answers2.htm#blank_windows

You get a blank page:

1. Click Start, and then click Run.

2. In the Open box, type:

regsvr32 urlmon.dll

3. Click OK, and then click OK again when you receive the following message:

DllRegisterServer in urlmon.dll succeeded.

4. If that doesn't fix it, see this article:
http://www.mvps.org/inetexplorer/answers.htm#new_window

5. If you are using WinXP try this:
http://www.mvps.org/sramesh2k/reg/IE_Default_Browser.reg

You can also try this:

Go to Start/run, and type SFC (msconfig for WinXP).
Choose 'Extract One File From Installation Disk' ("Expand File" for WinXP).
Type oleaut32.dll, not worrying about its location. Then, click Start.

Next to 'Restore From', type in or browse for the file's location, which is
probably in the Win98 (i386 for WinXP) folder of your installation CD-ROM
(typically D:\Win98), or in your Windows\Options\Cabs (Windows\i386 for
WinXP) folder, as the case may be.

Then, next to 'Save File In', enter C:\Windows\System (C:\Windows\System32
for WinXP), and click OK. System File Checker (or msconfig) looks for the
file, saves it as you requested, and then tells you that 'the file has been
successfully extracted'.

You may need to reboot.

or............................

Blank IE Pages

Resetting security level to default "medium" resolved issue

Go to Start|Run and enter "regsvr32 /i urlmon.dll" (without the
quotes). After you get a Success message, re-boot. If that doesn't work,
then check out the following article and do the additional steps outlined
there:

You Cannot Open New Internet Explorer Window or Nothing Happens After You
Click a Link
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q281679

It is difficult for us to determine the right information to provide for
your problem with out more details, such as the version of Windows you are
using, if you have SP2, and the exact wording of any error messages you may
be getting. This will help us determine the proper information to provide
you to make the necessary corrections to resolve your problem. Please post
back with this information and we'll try to get your problem resolved.

You might also review the following information:
How to make a good newsgroup post:
http://www.dts-l.org/goodpost.htm


Thank you :-)

Jan :)
Smiles are meant to be shared,
that's why they're so contagious.

Please reply to the newsgroup so others may benefit.
Replies are posted only to the newsgroup for the benefit or other readers.

How to make a good newsgroup post:
http://www.dts-l.org/goodpost.htm
 
Hi,

Maybe this link takes you to redirected site, but your browser doesn't
support this feature at the moment and gives you only a blank page.
Go to your IE options and Security leaf. Check if you have custom
level Security. Click Custom Level button and check that META REFRESH
is Enabled.
This option allows redirecting.

Gere
 
Back
Top