Win2k SP3 keeps cashing

  • Thread starter Thread starter Phil Roberts
  • Start date Start date
P

Phil Roberts

One of our users was shutting down his Win2K SP 3 system
yesterday when the building lost power. Now that the
power is back on his system keeps getting the BSOD
evrytime it boots. The stop error being displayed is
0x00000051. I've searched the KB about this error
condition, and everything I've found says to use the ERD
or install SP4. The original administrator of the system
did not create the ERD, and I can't get the system to stay
up long enough to install SP4. What might I try now
except for reloading Win2K?

TIA
 
One of our users was shutting down his Win2K SP 3 system yesterday when
the building lost power. Now that the power is back on his system keeps
getting the BSOD evrytime it boots. The stop error being displayed is
0x00000051. I've searched the KB about this error condition, and
everything I've found says to use the ERD or install SP4. The original
administrator of the system did not create the ERD, and I can't get the
system to stay up long enough to install SP4. What might I try now
except for reloading Win2K?

TIA
Click to expand...


The powerout circumstances are suspcicous, i would look for bad hardware
too.
Download a hard drive diagnostic util from the HDD manufacturer.
And try swapping out various cards/ periphrals (one at a time).

You can TRY sfc /scannow from the command prompt. Have the CD ready.
An in-place reininstall should not be too painful. (do backup personal
files and important data on the HDD first)

In the future, Get a UPS.
 
Back
Top