Win2K dialup networking problem

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I tried to post this message ealier today, but now I can't find it. So if this looks like a repeat, I apologize.

Does anyone know if the below scenario is possible? And if so, how would you do it?

Setup Server Z on private network 192.168.0.0 (server has a nic, several modems and is running a terminal server)
Setup Client A and B also on network 192.168.0.0

I would like client A and B to simultaneously be able to:

1. open a remote terminal on Server Z
2. log into server Z with (with a different username for each client)
3. use any one of Server Z's available modems to connect to an ISP
4. run internet applications on Server Z through their respective PPP connections with complete data separation.
 
Terminal Server should be able to do most of what you ask. Just keep in mind you may need to add static routes to access
information through the dial up connections. The default nature would be to change the default gateway but this would cause a
routing problem for the clients.

Thank you,
Mike Johnston
Microsoft Network Support
--

This posting is provided "AS IS" with no warranties, and confers no rights. Use of included script samples are subject to the
terms specified at
http://www.microsoft.com/info/cpyright.htm

Note: For the benefit of the community-at-large, all responses to this message are best directed to the newsgroup/thread from
which they originated.
 
Back
Top