win2k crash after installing SP4

  • Thread starter Thread starter Eileen
  • Start date Start date
E

Eileen

Hi,
My computer go into blue screen with the following error
message after installing SP4.

STOP: 0x0000000A(0xBAD0B0BC, 0x000000FF, 0x00000000,
0x80416B67) IROL_NOT_LESS_OR_EQUAL

Address 80416b67 base at 80400000 Date Stamo 3ee6c002 -
ntoskrnl.exe

Hi can only run on safe mode.

Please Help. Thanks.
Eileen
 
Hi Eileen,

Did you install Pinnacle Systems 1394 (firewire)
driver on the Win2k machine?
This is a known problem if you have the above
installed, and after installing the Windows 2000 SP4, the
machine will starts to the blue screen you've mentioned.

To resolve this behavior, perform the following steps:
Step 1) Restart the computer into safe mode.
Step 2) Search for and locate the following file in %
WINDIR%\System32\Drivers:

Pin1394.sys > rename this file e.g. pin1394.old

Step 3) Restart the computer and you will be able to
get into Windows, and then obtain an updated driver from
Pinnacle Systems manufacturer.
<http://www.pinnaclesys.com/wwwmenu.asp?Langue_ID=7>

Hope this helps. Thanks


Regards,
Annie
 
Hi Eileen,

Did you install the Pinnacle Systems 1394 (firewire)
driver on the Win2k machine?
Is yes, after installing Win2k SP4, the computer will
restarts to bluescreen. (Due to the incompatible driver
named PIN1394.SYS)

To resolve this behavior, please perform the following
steps:

Step 1) Restart the computer into safe mode.
Step 2) Search for and locate the following file in %
WINDIR%\System32\Drivers:

Pin1394.sys > rename this file e.g. pin1394.old

Step 3) Restart the computer and you will be able to
get into Windows, and then obtain an updated driver from
Pinnacle Systems manufacturer.
http://www.pinnaclesys.com/wwwmenu.asp?Langue_ID=7

Hope this helps. Thanks


Regards,
Annie
 
Back
Top