win2003 can't fax anymore

  • Thread starter Thread starter MR
  • Start date Start date
M

MR

i recently replaced the mother board on my windows 2003 enterprise server.
therefore i also changed my serial ports. i had to an inplace upgrade to
windows 2003 because of a new HAL.

since then i have not been able to send or receive faxes. i am using the
same modem i did before (practical peripherals 14400). i tried to uninstall
and reinstall it but that did not help.
it does dial successfully but it cannot connect and send to the receiving
fax. i am attaching the log from a recent attempt. i cannot tell form it
what the problem is, i would appreciate any help
thanks
m

[4/10/2004 23:36:05]
Device name: Standard 14400 bps Modem
Permanent TAPI line ID: A54DFD4
Unimodem registry key: 0001
Job type: Send

[23:36:05][015791171][ 130173][ ] Modem initialization
[23:36:05][015791312][ 131580][ ] send:
"AT&FS0=0E0V1Q0"
[23:36:06][015792359][ 131681][ ] recv: "OK"
[23:36:06][015792406][ 131580][ ] send: "AT"
[23:36:07][015793453][ 131681][ ] recv: "OK"
[23:36:07][015793500][ 131580][ ] send:
"ATS7=60&D3&K4"
[23:36:12][015798562][ 131681][ ] recv: "OK"
[23:36:12][015798609][ 131580][ ] send:
"ATX4M0L0"
[23:36:17][015803671][ 131681][ ] recv: "OK"
[23:36:17][015803671][ 330104][ ] Phase A - Call establishment
[23:36:17][015803671][ 330117][ ] Dialing...
[23:36:18][015803781][ 130698][ ] send:
"AT+FCLASS=1"
[23:36:18][015804343][ 131580][ ] send: "AT"
[23:36:19][015805390][ 131681][ ] recv: "OK"
[23:36:19][015805593][ 130872][ ] send: "ATDT
#############"
[23:37:47][015893656][ 131681][ ] recv:
"CONNECT"
[23:37:47][015893656][ 131078][ ] Response - CONNECT
[23:37:47][015893656][ 310214][ ] Phase B - Negotiation
[23:37:47][015893656][ 50750][ ] recv: HDLC
frame, 29 bytes, ff 03 40 33 36 37 34 35 31 32 39 30 33 31 20 20 20 20 20 20
20 20 20 43 a0 10 03 0d 0a
[23:37:47][015893656][ 131681][ ] recv: "OK"
[23:37:47][015893656][ 312046][ ] frame is CSI,
non-final frame
[23:37:47][015893656][ 131580][ ] send:
"AT+FRH=3"
[23:37:54][015899718][ 131681][ ] recv:
"CONNECT"
[23:37:54][015899718][ 50750][ ] recv: HDLC
frame, 9 bytes, ff 13 fa 13 e7 10 03 0d 0a
[23:37:54][015899718][ 131681][ ] recv: "OK"
[23:37:54][015899718][ 312046][ ] frame is DCN,
final frame
[23:37:54][015899718][ 130804][ ] Hanging up
[23:37:54][015899765][ 131580][ ] send: "ATH0"
[23:37:55][015900812][ 131681][ ] recv: "OK"
[23:37:55][015900859][ 131580][ ] send: "ATH0"
[23:37:56][015901906][ 131681][ ] recv: "OK"
[23:37:56][015902015][ 130698][ ] send:
"AT+FCLASS=0"
[23:37:56][015902578][ 131580][ ] send: "AT"
[23:37:57][015903625][ 131681][ ] recv: "OK"
[23:37:58][015903687][ 131580][ ] send: "AT"
[23:37:59][015904734][ 131681][ ] recv: "OK"
[23:37:59][015905390][ 321878][ERR] Failed send
 
Is 'Practical peripherals 14400' the name of your Modem? If you have the
disks for Modem installation, may be try reinstalling the Modem driver. This
modem name & the Device name suggested in the log looks like Modem is'nt
properly installed.

--
R. Sridharan [MSFT]
Microsoft Printing, Imaging and Fax Team

This posting is provided "AS IS" with no warranties, and confers no rights.

Please do not send email directly to this alias. This alias is for newsgroup
purposes only.'

MR said:
i recently replaced the mother board on my windows 2003 enterprise server.
therefore i also changed my serial ports. i had to an inplace upgrade to
windows 2003 because of a new HAL.

since then i have not been able to send or receive faxes. i am using the
same modem i did before (practical peripherals 14400). i tried to uninstall
and reinstall it but that did not help.
it does dial successfully but it cannot connect and send to the receiving
fax. i am attaching the log from a recent attempt. i cannot tell form it
what the problem is, i would appreciate any help
thanks
m

[4/10/2004 23:36:05]
Device name: Standard 14400 bps Modem
Permanent TAPI line ID: A54DFD4
Unimodem registry key: 0001
Job type: Send

[23:36:05][015791171][ 130173][ ] Modem initialization
[23:36:05][015791312][ 131580][ ] send:
"AT&FS0=0E0V1Q0"
[23:36:06][015792359][ 131681][ ] recv: "OK"
[23:36:06][015792406][ 131580][ ] send: "AT"
[23:36:07][015793453][ 131681][ ] recv: "OK"
[23:36:07][015793500][ 131580][ ] send:
"ATS7=60&D3&K4"
[23:36:12][015798562][ 131681][ ] recv: "OK"
[23:36:12][015798609][ 131580][ ] send:
"ATX4M0L0"
[23:36:17][015803671][ 131681][ ] recv: "OK"
[23:36:17][015803671][ 330104][ ] Phase A - Call establishment
[23:36:17][015803671][ 330117][ ] Dialing...
[23:36:18][015803781][ 130698][ ] send:
"AT+FCLASS=1"
[23:36:18][015804343][ 131580][ ] send: "AT"
[23:36:19][015805390][ 131681][ ] recv: "OK"
[23:36:19][015805593][ 130872][ ] send: "ATDT
#############"
[23:37:47][015893656][ 131681][ ] recv:
"CONNECT"
[23:37:47][015893656][ 131078][ ] Response - CONNECT
[23:37:47][015893656][ 310214][ ] Phase B - Negotiation
[23:37:47][015893656][ 50750][ ] recv: HDLC
frame, 29 bytes, ff 03 40 33 36 37 34 35 31 32 39 30 33 31 20 20 20 20 20 20
20 20 20 43 a0 10 03 0d 0a
[23:37:47][015893656][ 131681][ ] recv: "OK"
[23:37:47][015893656][ 312046][ ] frame is CSI,
non-final frame
[23:37:47][015893656][ 131580][ ] send:
"AT+FRH=3"
[23:37:54][015899718][ 131681][ ] recv:
"CONNECT"
[23:37:54][015899718][ 50750][ ] recv: HDLC
frame, 9 bytes, ff 13 fa 13 e7 10 03 0d 0a
[23:37:54][015899718][ 131681][ ] recv: "OK"
[23:37:54][015899718][ 312046][ ] frame is DCN,
final frame
[23:37:54][015899718][ 130804][ ] Hanging up
[23:37:54][015899765][ 131580][ ] send: "ATH0"
[23:37:55][015900812][ 131681][ ] recv: "OK"
[23:37:55][015900859][ 131580][ ] send: "ATH0"
[23:37:56][015901906][ 131681][ ] recv: "OK"
[23:37:56][015902015][ 130698][ ] send:
"AT+FCLASS=0"
[23:37:56][015902578][ 131580][ ] send: "AT"
[23:37:57][015903625][ 131681][ ] recv: "OK"
[23:37:58][015903687][ 131580][ ] send: "AT"
[23:37:59][015904734][ 131681][ ] recv: "OK"
[23:37:59][015905390][ 321878][ERR] Failed send
Click to expand...
 
Back
Top