Win XP SP2 PC with slow connection...

  • Thread starter Thread starter Gis Bun
  • Start date Start date
G

Gis Bun

I have a Win XP SP2 PC on a domain. It's up to date for any updates. After
the PC boots up the user is unable to access a shortcut on the desktop with a
link such as \\server\shared\tryme.exe . It takes around 5 minutes of trying
before the user can use the app. The PC has a static IP address with the
correct settings (even with a dynamic address, same problem). The power
management for the NIC is off. It's connected to a switch with 2 other PCs.
The other 2 PCs have no issuesand the cable for the PC with the problem has
changed. Ideas?

Gis
 
Gis said:
I have a Win XP SP2 PC on a domain. It's up to date for any updates. After
the PC boots up the user is unable to access a shortcut on the desktop with a
link such as \\server\shared\tryme.exe . It takes around 5 minutes of trying
before the user can use the app. The PC has a static IP address with the
correct settings (even with a dynamic address, same problem). The power
management for the NIC is off. It's connected to a switch with 2 other PCs.
The other 2 PCs have no issuesand the cable for the PC with the problem has
changed. Ideas?
Click to expand...

You say the settings are correct, but the symptoms you describe normally
occur when DNS is wrong. Please recheck the DNS settings; the
workstation should only be looking to the server for DNS.


Malke
 
Malke said:
You say the settings are correct, but the symptoms you describe normally
occur when DNS is wrong. Please recheck the DNS settings; the
workstation should only be looking to the server for DNS.


Malke
Click to expand...

The DNS settings are fine. We have 100+ PCs using reserved DHCP addresses
including this PC. Yet this is the only PC with the issue.

Gis
 
Gis said:
The DNS settings are fine. We have 100+ PCs using reserved DHCP addresses
including this PC. Yet this is the only PC with the issue.
Click to expand...

Bad hardware perhaps, some third-party security program, iffy wiring to
whatever connects to your network, failing NIC, marginal switch. Sorry,
but there's no way to tell without examining the machine first-hand.

Good luck and EOT for me.


Malke
 
Malke said:
Bad hardware perhaps, some third-party security program, iffy wiring to
whatever connects to your network, failing NIC, marginal switch. Sorry,
but there's no way to tell without examining the machine first-hand.

Good luck and EOT for me.


Malke
Click to expand...

Well, the cable was changed, The cable was also put in another port on the
switch. So I can rule them out. No third party security software. Just our
standard AV.

I'll probably just disable the NIC and pop in another one then.

Gis
 
Back
Top