Win 2K server transmits, but no recieve

  • Thread starter Thread starter MMJII
  • Start date Start date
M

MMJII

Hello All,
I set up a win 2K server the nic is on the motherboard. This system used to
work fine, but a HD crash forced me to rebuild from scatch (no good backup).
My problem is that after the setup, I wanted to install win updates, and
noticed I could not get on the net. I couln't ping any thing in, or outside.
i can ping the server itself, but all other ip's get noreply.
I then notice that the trans/recv icon only blinks the xmit side. After
looking at the statictics I noticed xmit pkts., but 0 recv. pkts.
I changed switch ports, I changed cables, and I reinstalled the driver
(windows never reported any issues withth drivers) but still same problem.
I don't hav a FW installed on the server. I am going to check with a new
nic, but has anyone ever had this problem?
MMJII
 
Sounds like some bad hardware.

--

Regards,

Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft Certified Professional
Microsoft MVP [Windows]
http://www.microsoft.com/protect

:
| Hello All,
| I set up a win 2K server the nic is on the motherboard. This system used
to
| work fine, but a HD crash forced me to rebuild from scatch (no good
backup).
| My problem is that after the setup, I wanted to install win updates, and
| noticed I could not get on the net. I couln't ping any thing in, or
outside.
| i can ping the server itself, but all other ip's get noreply.
| I then notice that the trans/recv icon only blinks the xmit side. After
| looking at the statictics I noticed xmit pkts., but 0 recv. pkts.
| I changed switch ports, I changed cables, and I reinstalled the driver
| (windows never reported any issues withth drivers) but still same problem.
| I don't hav a FW installed on the server. I am going to check with a new
| nic, but has anyone ever had this problem?
| MMJII
|
|
 
Back
Top