Why does connection break after adding a second IP address?

  • Thread starter Thread starter Dmitriy Kopnichev
  • Start date Start date
D

Dmitriy Kopnichev

Hello
Why does connection to outside news and mail servers break after adding a
second
IP address in the "Advanced TCP/IP settings"? The second IP address is
needed to see a network server. My computer sees the network server when the
second IP address is entered on a general tab in the IP Properties window
only. The connection to outside news and mail servers doesn't resume after
adding the first IP address in the "Advanced TCP/IP settings".
 
after adding second nic, the routing table may change. also posting ipconfig
here may help.

--
For more and other information, go to http://www.ChicagoTech.net

Don't send e-mail or reply to me except you need consulting services.
Posting on MS newsgroup will benefit all readers and you may get more help.

Robert Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN, Anti-Virus, Tips & Troubleshooting on
http://www.ChicagoTech.net
This posting is provided "AS IS" with no warranties.
 
I didn't add second network interface card.
Robert L said:
after adding second nic, the routing table may change. also posting ipconfig
here may help.

--
For more and other information, go to http://www.ChicagoTech.net

Don't send e-mail or reply to me except you need consulting services.
Posting on MS newsgroup will benefit all readers and you may get more help.

Robert Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN, Anti-Virus, Tips & Troubleshooting on
http://www.ChicagoTech.net
This posting is provided "AS IS" with no warranties.
Click to expand...
 
Back
Top