Western Digital Caviar Black

  • Thread starter Thread starter Mark Stonecipher
  • Start date Start date
M

Mark Stonecipher

Just received a Western Digital Caviar Black 640kb. First I have a WD 320
SATA 2 drive, and bought this new one to replace it as a boot drive. I am
using Vista and use the dual upgrade option when installing. The 320 drive
works fine, and after removing it and installed the new Cavair black drive.
It will not complete the upgrade because at the end it says it cant find
certain drivers. This does not happen on the 320 drive. Is there anyting
unique with this new drive that requires drivers. Maybe something in the
BIOS. Any ideas would be helpful. I surely cannot find anything.
 
Mark said:
Just received a Western Digital Caviar Black 640kb. First I have a WD
320 SATA 2 drive, and bought this new one to replace it as a boot
drive. I am using Vista and use the dual upgrade option when
installing. The 320 drive works fine, and after removing it and
installed the new Cavair black drive. It will not complete the upgrade
because at the end it says it cant find certain drivers. This does not
happen on the 320 drive. Is there anyting unique with this new drive
that requires drivers. Maybe something in the BIOS. Any ideas would be
helpful. I surely cannot find anything.
Click to expand...

Mine installed fine on Vista, no additional drivers needed. I don't
know what you mean by "dual upgrade", so there may be something related
to that.

You can always check for Bios updates, it might help. If you are
installing a raid, it may need drivers depending on your motherboard.
But I have never done a raid, so I am not sure about that either.

Clark
 
Back
Top