weird problems with a7v333

  • Thread starter Thread starter darren reed
  • Start date Start date
D

darren reed

hi group i was wondering if anyone here could help me with a weird problem
that i am trying to sort out for my mate
he`s got a athlon 2700xp that point blank refuses to post when set to run as
a 2700(166fsb)it posts fine when set to 266 fsb but it only posts as a 2100
we have tried his processor and ram in my machine and its fine and my
processor and ram work(i also have a 2700xp and thesame ram but hes got
2x256mb ive got 1x512mb) fine in his machine any help or suggestions would
be appreiciated
tyia
darren
specs as far as i know
asus a7v333 mobo
2x256mb twinmos 2700
radeon 7500le 64mb
creative 5.1 sound card
350w generic power supply
 
Early A7V333 motherboard versions are limited to the 2400+
Athlon. Later versions of the motherboard can use higher speed
cpu's. There was a link to ASUS that illustrated this as I'd had
hoped to upgrade my slower speed cpu to speed things up. Maybe
someone can provide the link as I don't have it at this moment.

Also, you will want to run the latest full bios release, 1017, I
believe. Also, the latest current via 4in1 driver might help
too. Find real good advice on how to safely load that 4in1
bugger or you'll end up losing services or features that were
there and were previously working fine. I loaded mine from safe
mode. Learned the hard way. Good luck.
 
try with one stick of memory in slot 2

If that works, try with memory in slots 1 and 3

the_gnome
 
thanks for the advice i know the bios revision number for the board is 1013
so we gonna flash it tomorrow and see how we get onwith that
 
What services and features did you lose? I never had to install 4in1
driver through Windows XP's safe mode before. Maybe I am missing
something? :I

Early A7V333 motherboard versions are limited to the 2400+
Athlon. Later versions of the motherboard can use higher speed
cpu's. There was a link to ASUS that illustrated this as I'd had
hoped to upgrade my slower speed cpu to speed things up. Maybe
someone can provide the link as I don't have it at this moment.
Click to expand...
Also, you will want to run the latest full bios release, 1017, I
believe. Also, the latest current via 4in1 driver might help
too. Find real good advice on how to safely load that 4in1
bugger or you'll end up losing services or features that were
there and were previously working fine. I loaded mine from safe
mode. Learned the hard way. Good luck.
Click to expand...
darren reed wrote:
Click to expand...


--
"There are things in the Universe billions of years older than either
of our races. They're vast, timeless, & if they are aware of us at all
it's as little more than ants & we have as much chance of communicat-
ing with them as an ant has with us. We know. We've tried & we learned
that we can either stay out from underfoot or be stepped on. They are
a mystery & I'm both terrified & reassured that to know that there are
still wonders in the Universe, that we have not explained everything.
Whatever they are, Miss Sakai, they walk near Sigma 957 & they must
walk there alone." --G'Kar - Mind War
/\___/\
/ /\ /\ \ Phillip Pi (Ant) @ The Ant Farm: http://antfarm.ma.cx
| |o o| | E-mail: (e-mail address removed) or (e-mail address removed)
\ _ / Remove ANT if replying by e-mail from a newsgroup/mailing
( ) list.
 
Hibernation mode, for one, stopped working for me after an
upgrade of the 4in1 driver. After then, going into Via's site,
there was some advice on what to do when upgrades cause
problems. At that time, many other people were also complaining
online about the problems the 4in1 drivers were causing. It's
been awhile now, so I can't remember all of what people were
reporting with the 4in1 drivers. Google would show what those ng
posts have to say. If it worked flawlessly for you the 1st time
- that's great. Some of us aren't so lucky first time around.
 
Ah, I don't use hibernation feature.


Hibernation mode, for one, stopped working for me after an
upgrade of the 4in1 driver. After then, going into Via's site,
there was some advice on what to do when upgrades cause
problems. At that time, many other people were also complaining
online about the problems the 4in1 drivers were causing. It's
been awhile now, so I can't remember all of what people were
reporting with the 4in1 drivers. Google would show what those ng
posts have to say. If it worked flawlessly for you the 1st time
- that's great. Some of us aren't so lucky first time around.
Click to expand...
--
"The ants and termites have renounced the Hobbesian war." --Petr
Kropotkin
/\___/\
/ /\ /\ \ Phillip Pi (Ant) @ The Ant Farm: http://antfarm.ma.cx
| |o o| | E-mail: (e-mail address removed) or (e-mail address removed)
\ _ / Remove ANT if replying by e-mail from a newsgroup/mailing
( ) list.
 
Back
Top