web-page will not load from dial-up connection

  • Thread starter Thread starter Steve J
  • Start date Start date
S

Steve J

After adding ethernet card to PC, the dial up connection
will connect to ISP but no web pages will load. I can
ping the IP address of the ISP but cannot ping the ISP
home page name or any other web page by name. Typing the
IP address in the address line of Internet explorer does
not work. The dial up connection status indicates
connected.
I have checked and reset every option for LAN and dialup
connections that I could find. I have deleted the dial-up
connection and created a new one with no change.
Physically removed the ethernet card and no change.

Please Help!!!!!
 
I would check the DNS settings and make sure it points to the correct DNS.

--
For more and other information, go to http://www.ChicagoTech.net

Don't send e-mail or reply to me except you need consulting services.
Posting on MS newsgroup will benefit all readers and you may get more help.

Robert Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN, Anti-Virus, Tips & Troubleshooting on
http://www.ChicagoTech.net
This posting is provided "AS IS" with no warranties.
 
Back
Top