Way to go ASUS tech support.

  • Thread starter Thread starter rllipham
  • Start date Start date
R

rllipham

Had a problem with memory in slot 3 of a new A7N8X. It would not work
in 3 but would in 1 and 2.

Contacted ASUS online and had an answer in three hours.


They had me to place electrician tape under the board at the screw
points. Worked fine.

Way to go ASUS.

I know why this is the 5th generation of ASUS board.
 
Had a problem with memory in slot 3 of a new A7N8X. It would not work
in 3 but would in 1 and 2.

Contacted ASUS online and had an answer in three hours.


They had me to place electrician tape under the board at the screw
points. Worked fine.

Way to go ASUS.

I know why this is the 5th generation of ASUS board.
Click to expand...

What the hell is up with ASUS and not grounding boards through the screws? They
all have a solder ring around them as if they're meant to be grounded, and my
P4P800's User Guide and Quick Setup Guide don't say anything about insulating
them, but when I got my replacement for the board which I RMA'd because the BIOS
was hosed (not my fault, cpr didn't work, crashfree didn't work), it came with a
sheet of notes for common problems which included insulating the screws.
 
Back
Top