W2K Server cloned from IDE to SCSI

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I want to use sysprep to image on an IDE-based machine and use the image on a
SCSI-based machine, with a RAID controller?

I am confused by the Article #216915
"Using the System Preparation Tool on Dissimilar Computers".

It says the Windows 2000 system kernel (Ntoskrnl.exe) must be the same.
Wouldn't it always be the same since the OS drive is being cloned?

Has anybody had any success using sysprep to clone an IDE-based machine to
one with a RAID?

Any help would be much appreciated.
 
These articles may help.

How to Move a Windows Installation to Different Hardware
http://support.microsoft.com/?id=249694

HOW TO: Replace the Motherboard on a Computer That Is Running Windows
http://support.microsoft.com/?id=824125

--
Regards,

Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft Certified Professional
Microsoft MVP [Windows]
http://www.microsoft.com/protect

:
|I want to use sysprep to image on an IDE-based machine and use the image on
a
| SCSI-based machine, with a RAID controller?
|
| I am confused by the Article #216915
| "Using the System Preparation Tool on Dissimilar Computers".
|
| It says the Windows 2000 system kernel (Ntoskrnl.exe) must be the same.
| Wouldn't it always be the same since the OS drive is being cloned?
|
| Has anybody had any success using sysprep to clone an IDE-based machine to
| one with a RAID?
|
| Any help would be much appreciated.
|
 
I see warnings to be carefull if it's a DC. Is this procedure still possible
on a Domain Controller?

Thanks,
Brad
 
Yes, possible. As you can see from the article the success may depend on
several items.

--
Regards,

Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft Certified Professional
Microsoft MVP [Windows]
http://www.microsoft.com/protect

:
|I see warnings to be carefull if it's a DC. Is this procedure still
possible
| on a Domain Controller?
|
| Thanks,
| Brad
 
Back
Top