W2K Server and routing.

  • Thread starter Thread starter Luca
  • Start date Start date
L

Luca

I have this scenario :
One w2k server with two nics :
Nic #1 -> 192.168.1.x attached to one branch of my offices
Nic # 2 -> 192.168.2.x attached to other branch of my offices.
Which configuration I have to do to let a pc that resides in 192.168.1.x
branch to ping a pc in the other branch (192.168.2.x)
Thanks in advance for your suggestions.
________________________________
Luca P.
 
Hi,

You just need to enable RRAS and configure it to be a Lan router. Here is
an article that explains:

299810 HOW TO: Configure Windows 2000 to Be a Router
http://support.microsoft.com/?id=299810

Thanks,
Marc Reynolds
Microsoft Technical Support

This posting is provided "AS IS" with no warranties, and confers no rights.
 
Yes, but you also have to let the machines on either side of the new
"router" know about this new route.

You can either do this by setting the appropriate server IP address
(depending on which segment you're doing this on) as the default
gateway, or by adding a route to the other segment w/ this IP as the
router (route /?)
 
Back
Top