W2K Problem

  • Thread starter Thread starter DIGS
  • Start date Start date
D

DIGS

I am running into a problem on a windows 2000 pc, it will not boot into the
Login screen. I have tried booting in Safe mode as well as last good
configuration but they have both filed. After the windows 2000 screen loads
then the desktop back ground appears for about 3 seconds or so the PC
reboots.

I ran the Windows 2000 CD and did a repair all checks out fine. Also went to
the windows repair console and did a FIXBOOT, and FIXMBR Still no luck and
it is not able to boot to the Login screen.

I was told a Windows update was possible done but I am not 100%. I am not
sure if it may be a GUI problem with update that Ran. Does anyone know about
a Patch?

Any suggestions are helpful in recovering.

Thank you
 
Digs,

If you have any USB devices then unplu & try to boot then

Post back your findings please
 
Thanks but I did remove all items that were pluged into the USB ports and
still the same issue.
 
Digs,

Is the hard drive light constantly on?

Is the hard drive detected in the BIOS?
 
To the OP -- did you recently install the Windows Update KB931768? This
update is known to be bad, both in Win2K as well as Vista, and causes a
variety of problems. One of the repoerted problems is continual rebooting
of Win2K.

Uninstall this update if you have it, and see if things improve.
 
Jay
Did you recently install the Windows Update KB931768? Yes I do believe it
may have been that.


Newbie

Answers are next to your questions?

Is the hard drive light constantly on? Yes

Is the hard drive detected in the BIOS? Yes
 
After much thought,DIGS aka (e-mail address removed) came up with this jewel:
I am running into a problem on a windows 2000 pc, it will not boot
into the Login screen. I have tried booting in Safe mode as well as
last good configuration but they have both filed. After the windows
2000 screen loads then the desktop back ground appears for about 3
seconds or so the PC reboots.

I ran the Windows 2000 CD and did a repair all checks out fine. Also
went to the windows repair console and did a FIXBOOT, and FIXMBR
Still no luck and it is not able to boot to the Login screen.

I was told a Windows update was possible done but I am not 100%. I
am not sure if it may be a GUI problem with update that Ran. Does
anyone know about a Patch?

Any suggestions are helpful in recovering.

Thank you

Have you run the repair more than once?

max
--
My Pages:
Virus Removal Instructions:
http://maxpro4u.freehostingnow.com/removal.html
Keeping Windows Clean:
http://maxpro4u.freehostingnow.com/keepingclean.html
Tools: http://maxpro4u.freehostingnow.com/tools.html
Change nomail.afraid.org to gmail.com to reply. nomail.afraid.org is
specifically setup for USENET.Feel free to use it yourself.
 
After much thought,DIGS aka (e-mail address removed) came up with this jewel:
Max

Have you run the repair more than once? Yes 3 times

Read the thread from Wideawake posted on the 10th. Try the suggestion
about removing the update using a batch file in the recovery console.

max
--
My Pages:
Virus Removal Instructions:
http://maxpro4u.freehostingnow.com/removal.html
Keeping Windows Clean:
http://maxpro4u.freehostingnow.com/keepingclean.html
Tools: http://maxpro4u.freehostingnow.com/tools.html
Change nomail.afraid.org to gmail.com to reply. nomail.afraid.org is
specifically setup for USENET.Feel free to use it yourself.
 
Back
Top