VPN Server cannot get to internet...

  • Thread starter Thread starter Lance Bockelman
  • Start date Start date
L

Lance Bockelman

Hope someone can help..
I have a Windows 2003 Standard Server setup with 2 nic's
running RRAS. Clients can connect and get to network
resourses with no problems.
The server however cannon browse the internet.
Here is my setup:
Internal Nic
IP: 10.0.0.1
MASK: 255.255.0.0
Gateway: Blank (Have tried firewall 10.0.0.9, and
pointing to the address of external nic)
DNS: 10.0.0.11
External Nic:
IP: Public Address
Mask: 255.255.255.240
Gateway: ISP Gateway
DNS: ISP DNS


I dont understand why it cannot get to the internet but
clients can find the server with no problems.
Any help would be appreciated.
Thanks,
Lance

(e-mail address removed)
 
sounds like routing issue. posting the result of routing table here may
help.

--
For more and other information, go to http://www.ChicagoTech.net

Don't send e-mail or reply to me except you need consulting services.
Posting on MS newsgroup will benefit all readers and you may get more help.

Robert Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN, Anti-Virus, Tips & Troubleshooting on
http://www.ChicagoTech.net
This posting is provided "AS IS" with no warranties.
 
Can you check if any inbound and/or outbound filters are set?
You can change these filters by right clicking the interface and selecting
properties.

Hope this helps,
Thanks,
Dinesh.
 
Back
Top