Vpn Problem !!!!Help

  • Thread starter Thread starter Taj
  • Start date Start date
T

Taj

Hi There ,
i have vpn server installed on a win2000
server which is a a test server on my windows nt 4.0
domain .Sever has a one network card which is config as
ip 201.123.222.456
gateway 192.168.0.1
subnet 255.255.255.0
dns 202.122.251.255
my isp provider have given me a router which is set on
192.168.0.1 which is also my dhcp server ......
i am able to connet to the vpn sever and access its
resources with out any problem but if i try to access or
ping any other machine on my nt domain i am not able to
ping it i try to access the shared folder on one of my
machine in my lan network it always come up with error "
\\237\d is not accessible .you might not have permission
to use the network resource . contact the administrator of
this server to find out if you have access permission
the network path was not found ". i am using a
administrator id to acess the vpn sever through the client
I am have the tcp/ip and netbeui configured on the vpn
sever
I try to get the ipconfig on the client machine it gave
me
ip addess 192.168.0.24
subnet mark 255.255.255.255 ....(this may be the problem )
default gateway 192.168.0.24
dns 202.122.251.255

i am going crazy about the problem any help wll be useful
Thanks
taj
 
have you enabled ip routing? also posting the routing table here may help.

--
For more and other information, go to http://www.ChicagoTech.net

Don't send e-mail or reply to me except you need consulting services.
Posting on MS newsgroup will benefit all readers and you may get more help.

Robert Lin, MS-MVP, MCSE & CNE
Windows & Network Support, Tips and FAQs on http://www.ChicagoTech.net
This posting is provided "AS IS" with no warranties.
 
Someone correct me if I'm wrong but the servers IP address isn't even on the
same subnet as the default gateway. Shouldn't the server reside in the
192.168.0.x network? If your server is going to have a static ip, in the
same subnet, you will need to make a reservation in the router so it doesn't
issue that address to another client.
 
You are not wrong! The server must have a private IP in the same subnet as
the router. The remote client will connect to the router's public IP, and
the traffic will need to be sent on to the server by IP mapping or port
forwarding.
 
Back
Top