VPN Internal adapter

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

My server just crashed and before that my vpn worked fine,
In rras under ip general the internal adapter use to have an ip address, now
since i reinstalled win2000 server it shows no ip address, therefore it will
not accept connections, it just sits at the verifying password screen, i have
dns running and wins running also on the same server. What can i do to
enable the internal adapter. I am using 1 nic card as i have always done.
 
posting the result of ipconfig /all here may help.

--
For more and other information, go to http://www.ChicagoTech.net

Don't send e-mail or reply to me except you need consulting services.
Posting on MS newsgroup will benefit all readers and you may get more help.

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN, Anti-Virus, Tips & Troubleshooting on
http://www.ChicagoTech.net
VPN Solutions, http://www.chicagotech.net/vpnsolutions.htm
VPN Process and Error Analysis, http://www.chicagotech.net/VPN process.htm
VPN Troubleshooting, http://www.chicagotech.net/vpn.htm
This posting is provided "AS IS" with no warranties.
 
The internal adapter will get an IP address as soon as the first remote
client connects. This is just a symptom of your problem, not the cause.
 
Back
Top