VPN betweeen two firewalls

  • Thread starter Thread starter Leonard Selmani
  • Start date Start date
L

Leonard Selmani

Hello everyone. I have setup a VPN (IPSec) between two
Firewalls. I have two offices (headquarters(HQ) and a
branch office(BO)), and both are behind WatchGuard brand
firewalls. I did setup a Firewall to Firewall VPN, and I
can ping both networks, but what I cannot do(or know how
to) is share any resources from one server to the other.
Does anyone know of a MS document that explains what I
need to do to share resources between machines once I have
a VPN setup between firewalls? Or has someone done this
before and can give me some good tips. I appreciate your
help

Sincerely,
Leo
 
Once you have the VPN configured and you can ping from one site to the
other by IP address, the link is working. From then on, you can forget about
VPN. The situation is identical to any other network where two segments are
connected by a router.

Exactly how you configure domain structure, name resolution etc is up to
you.
 
That answers my question. Thanks Bill

-----Original Message-----
Once you have the VPN configured and you can ping from one site to the
other by IP address, the link is working. From then on, you can forget about
VPN. The situation is identical to any other network where two segments are
connected by a router.

Exactly how you configure domain structure, name resolution etc is up to
you.




.
Click to expand...
 
Back
Top