VPN and WAtchguard firewall

  • Thread starter Thread starter Dezzarezza
  • Start date Start date
D

Dezzarezza

I am trying to set up VPN to my 2000 server from a laptop. From the
log on the firewall it looks like everything has been accepted but I
can only get as far as the verifying username and password stage
before it disconnects. Any ideas?
 
assuming you get error 721, this may help. quoted from
http://www.ChicagoTech.net

Error 721: Remote PPP peer or computer is not responding. If you have tried
many thing other people suggest like rebooting, reloading hardware and
re-installing the VPN or dial in connection, you still get the same problem.
I will suggest to check the router settings and make sure TCP Port 1723, IP
Protocol 47 (GRE) are opened. Also make sure that the router has the PPTP
enabled and not firewall block the traffic. On the RAS server, check the
DHCP settings.

--
For more and other information, go to http://www.ChicagoTech.net

Don't send e-mail or reply to me except you need consulting services.
Posting on MS newsgroup will benefit all readers and you may get more help.

Robert Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN, Anti-Virus, Tips & Troubleshooting on
http://www.ChicagoTech.net
This posting is provided "AS IS" with no warranties.
 
Back
Top