G
Guest
Please help!!!!
After about 6 months of trouble free internet-access and networking between
my main computer (vista 64 ultimate) and my secondary PC (XP Pro64), I turn
on the vista PC one morning and I can neither connect to the internet or
network to other computers ...The only thing that was different was a BIOS
error message "checksum Bad" upon startup where I selected F2 (load default
settings). Internet explorer won't even connect to the default router page
http://198.162.2.1 !!
The network name has now changed to "unidentified network" with "limited
connectivity" and access set to "local only". The XP Pro64 PC on the other
hand, still works fine and can connect to the internet (and my renderfarm
computers) so there doesn't seem to be anything wrong with the router,
however it won't see the vista machine anymore . I have tried of every
troubleshooting procedure I can think of (listed below) with still no luck,
so if anyone has encountered this or knows of a solution please let me know.
Done so far:
1. repaired connection (in diagnostics)
2. automattically optained new IP address (in diagnostics)
3. tested all cables (cat6E)
4. updated router firmware
5. re-booted computers and router
6. tested with different router (setup error message: "couldn't find router")
7. reset onboard network adaptor
8. manually entered IP adress, default gateway DNS server info etc
9. rolled back network adaptor drivers
10. System restore taken back to a time when it was working
11. disabled IPv6 temporarily
12. enabled telnet
13. Manually entered the DNS search suffix "belkin"
14. temporarily disabled the firewall
p.s the router is a Belkin wired/wireless G modem/router,
Ethernet ports (2 on each computer) are both gigabit connections,
all computers share the same workgroup name,
network discovery and file sharing are all on
connection LED's on the ethrnet ports still work/flash fine,
there doesn't seem to be any conflicts in device mangager.
After about 6 months of trouble free internet-access and networking between
my main computer (vista 64 ultimate) and my secondary PC (XP Pro64), I turn
on the vista PC one morning and I can neither connect to the internet or
network to other computers ...The only thing that was different was a BIOS
error message "checksum Bad" upon startup where I selected F2 (load default
settings). Internet explorer won't even connect to the default router page
http://198.162.2.1 !!
The network name has now changed to "unidentified network" with "limited
connectivity" and access set to "local only". The XP Pro64 PC on the other
hand, still works fine and can connect to the internet (and my renderfarm
computers) so there doesn't seem to be anything wrong with the router,
however it won't see the vista machine anymore . I have tried of every
troubleshooting procedure I can think of (listed below) with still no luck,
so if anyone has encountered this or knows of a solution please let me know.
Done so far:
1. repaired connection (in diagnostics)
2. automattically optained new IP address (in diagnostics)
3. tested all cables (cat6E)
4. updated router firmware
5. re-booted computers and router
6. tested with different router (setup error message: "couldn't find router")
7. reset onboard network adaptor
8. manually entered IP adress, default gateway DNS server info etc
9. rolled back network adaptor drivers
10. System restore taken back to a time when it was working
11. disabled IPv6 temporarily
12. enabled telnet
13. Manually entered the DNS search suffix "belkin"
14. temporarily disabled the firewall
p.s the router is a Belkin wired/wireless G modem/router,
Ethernet ports (2 on each computer) are both gigabit connections,
all computers share the same workgroup name,
network discovery and file sharing are all on
connection LED's on the ethrnet ports still work/flash fine,
there doesn't seem to be any conflicts in device mangager.