Vista Ultimate Raid to Non-Raid

  • Thread starter Thread starter Ken
  • Start date Start date
K

Ken

I thought I had been able to make a backup of a Vista Ultimate System on a
Raid0 array (C: partition using the standalone Acronis True Image 10 boot
disk) and copy it back to a non-Raid disk. For some reason Vista will not
boot correctly and the Vista boot disk Repair Option thinks about it for 5
minutes or so and then says it can't fix the problem. I know I have done
this trick with WinXP and I thought I had done it with Vista. I know I can
do the save/restore routine (Raid0 to Raid0) with the Acronis standalone
software. Can someone please tell me what I have to do to get a Raid0
version of Vista Ultimate transferred to a non-Raid disk using all the same
hardware. I have the Vista Ultimate System on a network so I can backup to
a different controller and hard drive, delete the array, reformat using
Partition Magic 8.0 and restore. The only reason I am trying to do this
trick is because the SATA controller on the motherboard does not support
Raid Arrays and SATA DVD Drives together...and...I want to install multiple
SATA DVD Drives on this system.
 
Presumably you created an Image.
You then made the appropriate adjustments to the bios to disable raid, and
perhaps disconnected the other hd's prior to reimaging the sys?
 
Yes.

DL said:
Presumably you created an Image.
You then made the appropriate adjustments to the bios to disable raid, and
perhaps disconnected the other hd's prior to reimaging the sys?
Click to expand...
 
I pretty sure I have done this with Ghost 2003 (Standalone CD/Floppy Boot
Version). I lost interest after I installed the latest version of the Intel
Matrix Storage Manager software and the DVD Drive problem went away.
 
krisburg said:
I have same problem. Raid 0 on a HP d5990y Vista Ultimate computer.
Want to revert to non-raid.

Made image of Drive C. Moved image to non-raid drive. Set BIOS SATA
to non-raid (IDE) mode. Will not boot.

Mark


--
krisburg
------------------------------------------------------------------------
krisburg's Profile: http://forums.techarena.in/members/139796.htm
View this thread: http://forums.techarena.in/vista-setup-install/935596.htm

http://forums.techarena.in
Click to expand...

Did you remember to go into the RAID BIOS menu and reset the drives to non-RAID?
 
Back
Top