VISTA RC1 install failure on clean pc, with original Microsoft DVD

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

Hallo, the installation of Vista RC1 freeze at the second step.
The DVD is ok, as it runs on an other pc. I tried 64bit and 32bit.
My PC ist clean. - No software, no drivers, etc.
Only the monitor, keyboard and mouse are connected.

This ist the set-up of my pc:
Motherboard: ASUS P5W-DH
CPU: Intel Core2Duo E6700 2660Mhz, 4MB Cache, FSB 1066 MHz
Memory: 4x DDR2 1024MByte PC800 MDT
Harddisk: 500GB Maxtor S-ATA2 16MB Cache
Graphics Card: VGA PCX ASUS EN7950GX2 PHT 1024MB, Retail, GeForce-7950GX2
256 Bit, 1024MB DDR, Core 500MHz, Mem 1,2 GHz
Soundcard: Creative Sound Blaster Audigy SE
DVD: 16/48x, ATAPI
DVD: R/RW Samsung SHS-182D

Could you help me?!

Wolfgang
 
Wolfgang said:
Hallo, the installation of Vista RC1 freeze at the second step.
The DVD is ok, as it runs on an other pc. I tried 64bit and 32bit.
My PC ist clean. - No software, no drivers, etc.
Only the monitor, keyboard and mouse are connected.

This ist the set-up of my pc:
Motherboard: ASUS P5W-DH
CPU: Intel Core2Duo E6700 2660Mhz, 4MB Cache, FSB 1066 MHz
Memory: 4x DDR2 1024MByte PC800 MDT
Harddisk: 500GB Maxtor S-ATA2 16MB Cache
Graphics Card: VGA PCX ASUS EN7950GX2 PHT 1024MB, Retail, GeForce-7950GX2
256 Bit, 1024MB DDR, Core 500MHz, Mem 1,2 GHz
Soundcard: Creative Sound Blaster Audigy SE
DVD: 16/48x, ATAPI
DVD: R/RW Samsung SHS-182D

Could you help me?!

Wolfgang
Click to expand...

Do you, by clean, mean;{
the computer has not been used before, or, the hard drive(s) do not contain anything
(Such as another operating system)
}

Could you describe every choice you make up to the 'second step' and what
this 'second step' is?

E.g.

0. Turned on computer with Vista RC1 DVD in drive.
1. pressed any key to boot from CD/DVD
2. *second step* ...



///Terje Alexander Barth
\\\///
 
Okay, clean means, thas the hard drives do not contain anything, nor another
operating system..

Step one is: After booting, vista finish the progress bar (loading
program-files), and then, step two: swap to a new screen and freeze... At the
bottom I can see a vague text.

Excuse me, for my english.

Wolfgang
 
Wolfgang said:
Okay, clean means, thas the hard drives do not contain anything, nor another
operating system..

Step one is: After booting, vista finish the progress bar (loading
program-files), and then, step two: swap to a new screen and freeze... At the
bottom I can see a vague text.

Excuse me, for my english.

Wolfgang
Click to expand...

Hmm.

How long have you allowed Vista to stay at the 'frozen' screen before you '
have rebooted/shut down?

I had an experience similar to that in Windows XP 32bit where the screen
would appear frozen black for 10 minutes or so before it finally "unfroze".

Although; I also had the same problem you experienced with Vista RC1 and
I never managed to fix it.

When you install Vista, have you added some extra drivers for your
SATA2 hard-drive to be detected?

Also;
Do you reformat the hard-drive for every installation attempt, so that
the boot manager etc is gone?
I had some problems with Vista and a previous Vista Boot manager being there,
only way to get Vista up and running was to remove the boot manager from vista.


Regards,
 
Back
Top