Vista and Snap Servers

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

At work we have a Snap Server 1100 running Snap OS 4 shared on our workgroup.
I have a new PC with Visa Business. When I try to logon to the Snap Server
through the network using my username and password the logon is unsuccessful.
I think the problem could be that Vista places a "\" in front of my username
and the Snap Server doesn't recognise it, or allow backslahes in usernames.

Is there a way I can login to the Snap Server from a Vista machine without
removing all security off the server?

thanks,

Ian
 
It's OK I fixed the problem myself.
To do it you need to alter the value of the LM authentication level to 2 in
VISTA.
This can be done by the following steps:

1) Click Start
2) Click Control Panel (not classic view)
3) Click System & Maintenance
4) Click Administrative Tools
5) Double Click Local Security Policy
6) On the left pane, click to expand Local Policies
7) On the left pane, click on Security Options
8) Now, on the right pane, near the bottom, click on
Network Security LAN Manager Authentication Level
9) On the drop down, change the default setting (NTLMv2 only) to
Send LM & NTLM - use NTLMv2 session if negotiated.

Hope this saves others the hours that I wasted!
 
Thank you for sharing your experience with us.

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
It's OK I fixed the problem myself.
To do it you need to alter the value of the LM authentication level to 2 in
VISTA.
This can be done by the following steps:

1) Click Start
2) Click Control Panel (not classic view)
3) Click System & Maintenance
4) Click Administrative Tools
5) Double Click Local Security Policy
6) On the left pane, click to expand Local Policies
7) On the left pane, click on Security Options
8) Now, on the right pane, near the bottom, click on
Network Security LAN Manager Authentication Level
9) On the drop down, change the default setting (NTLMv2 only) to
Send LM & NTLM - use NTLMv2 session if negotiated.

Hope this saves others the hours that I wasted!
 
Back
Top