Vista and applying a WIM file

  • Thread starter Thread starter JV
  • Start date Start date
J

JV

After I create an image file of Vista in WIM format using Imagex.exe, I then
apply the image to another identical machine but it does not boot. I have
to insert the Vista DVD and run REPAIR from the second screen after language
settings and all is well.

How do make sure that after I apply the WIM image on another machine that it
boots up withOUT having to run repair?

Thanks.
 
JV said:
After I create an image file of Vista in WIM format using Imagex.exe, I
then apply the image to another identical machine but it does not boot. I
have to insert the Vista DVD and run REPAIR from the second screen after
language settings and all is well.

How do make sure that after I apply the WIM image on another machine that
it boots up withOUT having to run repair?
Click to expand...


How are you partitioning the new PC hard drive prior to applying the WIM
file?

Assuming that both PCs (the original and new) are a single HD with only 1
partition...

1) Boot a PE disk to a command prompt
2) diskpart
3) select disk 0
4) clean
5) create partition primary
6) assign letter=c
7) format fs=ntfs quick
8) active
9) exit
10) apply WIM with ImageX /apply
 
Back
Top