Video Card Problem Win XP

  • Thread starter Thread starter mashworth
  • Start date Start date
M

mashworth

"This device canot start (Code 10)" is the message I am
getting in reference to my video card (nvidia FX 5200 PCI)
in device manager. I can disable then re-enable to remove
message---device manager then indicates display is
working properly but it isn't. I have re-seated the video
card, upgraded the drivers etc..., etc.., to no effect. I
have even installed a different card this one an older
AGP nvidia GX 400. I get the same message with the older
card. Can anyone help???
 
Mash, make sure the AGP drivers for the motherboard are correctly installed.
Also, try the generic 'detonator' drivers provided by nvidia - they may be
more compatible with your system.

Chip
 
First, I hope "mashworth" was referring to a real PCI video card and not a
mis-configured AGP.

Y.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Error Message in device manager 1
Error Mesage in Device Manager 1
adding a second Video card 4
Two PCI Video cards 1
XP Media Center 2004(Motherboard and Video cards) 4
PCIexpress video card on ECS GeForce 6100PM mobo v2.0 2
Video Card???? 9
Can't get rid of "code 38" error with video card 2

Back
Top