Video capture is just not working

[Guest]

Hello, recently updated my PC, and I have all the correct software and wires,
but it does not want to capture the video. The PC reads the device, so I know
its working up to that point, what can I do?

 

[Graham Hughes]

Which app are you using? How is it connected? What is connected? What did
you update from to? Did it work ok before? Wha thappens when the pc reads
the device?

 

[Guest]

I am using windows movie maker, firewire connected, and its a JVC GR-D72. The
real problem is that it does not seem to read the video feed from camera to
pC, tho it does control the camera, It worked ok once I got a firewire, but
then my old computer broke down so I bought a new PC. As not read the feed on
this pC at all.

 

[Graham Hughes]

This pc has never worked with the camera?
Can you check the cable to see if this is damaged?
Can you try a known to work cam and cable on your pc to see if it's the
connection pc end?

 

[Guest]

It works as far as viewing the image feed back, I can control the camera
through the PC, it rewinds the tape and starts capture, but no images are
actually captured.

The cable is fine, that as been checked.

As for trying another camera, I will as soon as I know some one as got one.

 

[Deano1]

I have exact same issue but with JVC GR-DX75. Think I've tried
everything! If you find solution please let me know.

 

[Hand2ThePlow]

If you're using Firewire, check the device Manager to see if you
Firewire card has the Texas Instrument (TI) host controller. If not
replace it with one that does. After changing out my VIA card for th
TI card everything worked instantly.

See this post: http://www.pcbanter.net/showthread.php?t=798962