USR pci modem IRQ same as display... WHY WHY WHY???

  • Thread starter Thread starter Johnk
  • Start date Start date
J

Johnk

Not sure if this is why I'm constantly waiting waiting waiting. Removed it
and let it re-detect, but never seems to get unique IRQ. If not the same as
the Display (S540-agp) then the same as the sound-card or primary ide or
apci or...

I've disabled the COM ports in the bios, as well as in windows (XP Home), so
there are unused IRQ's, and Windows says "No Conflict" and when I try to set
resources manually I get "resources cannot be changed" (actually the check
box is disabled).

I've also pulled the modem, booted, shut down, replaced modem (in same slot
and in alternate slot) but still the same thing. The IRQ does change, (10,
11, 9) but always shared with another component.

What am I missing? Please Don't tell me to use install program for modem, I
don't have it, and it is an OEM Dell 3com/USrobotics voice modem and you
know the story on OEM ("Please contact you OEM vendor for software updates")

bother
 
IRQ sharing is normal and is rarely a problem today. What is your concern?
What are you "waiting waiting waiting" for? You might take a look at
Making Good Newsgroup Posts
 
In my BIOS (Award) there are options to have a separate IRQ for the Modem
and I think USB as well. Check it out.

And no offence intended whatsoever, but I found it slightly hard to
understand your post properly.

Damo
 
Back
Top