USB & SanDisk CF Reader

  • Thread starter Thread starter Bob
  • Start date Start date
B

Bob

I have a new SanDisk 8 in 1 reader. When booting with this plugged in my CPU
utiliztion sits at between 75 & 100%. If I unplug it my utilization drops to
near 0%.

If I boot with out the device plugged in my CPU is near 0% and I can then
plug in with no problem - CPU use may rise a couple points but nothing
major.

All of my other USB devices work fine (Printer, Mouse, MP3 player, Camera
etc...).

I have XP SP1 and the patch mentioned in KB822603. I also have the VIA chip
set but there sites says to contact Microsoft (WinXP - Due to licensing
agreements, USB 2.0 drivers are not available for download).

Any ideas?
 
Bob said:
I have a new SanDisk 8 in 1 reader. When booting with this plugged in my CPU
utiliztion sits at between 75 & 100%. If I unplug it my utilization drops to
near 0%.

If I boot with out the device plugged in my CPU is near 0% and I can then
plug in with no problem - CPU use may rise a couple points but nothing
major.

All of my other USB devices work fine (Printer, Mouse, MP3 player, Camera
etc...).

I have XP SP1 and the patch mentioned in KB822603. I also have the VIA chip
set but there sites says to contact Microsoft (WinXP - Due to licensing
agreements, USB 2.0 drivers are not available for download).

Any ideas?
Click to expand...

So do contact Microsoft. AFAIK the patches are free, if you don't ask for further support.

- PA
 
Back
Top